ClearOne COLLABORATE Pro 900 Quick start guide

Category
Video switches
Type
Quick start guide

This manual is also suitable for

ClearOne COLLABORATE Pro 900 is a video conferencing system that combines a codec, camera, microphone array, and mixer into a single, easy-to-use package. With its sleek design and powerful features, the COLLABORATE Pro 900 is perfect for small to medium-sized meeting rooms.

The COLLABORATE Pro 900's codec supports up to 1080p video resolution and features H.264 High Profile encoding for crystal-clear video quality. The camera has a wide field of view and 10x optical zoom, so you can easily see everyone in the room. The microphone array uses beamforming technology to focus on the voices of the people speaking, while reducing background noise. And the mixer provides echo cancellation and noise reduction to ensure that your audio is always clear.

ClearOne COLLABORATE Pro 900 is a video conferencing system that combines a codec, camera, microphone array, and mixer into a single, easy-to-use package. With its sleek design and powerful features, the COLLABORATE Pro 900 is perfect for small to medium-sized meeting rooms.

The COLLABORATE Pro 900's codec supports up to 1080p video resolution and features H.264 High Profile encoding for crystal-clear video quality. The camera has a wide field of view and 10x optical zoom, so you can easily see everyone in the room. The microphone array uses beamforming technology to focus on the voices of the people speaking, while reducing background noise. And the mixer provides echo cancellation and noise reduction to ensure that your audio is always clear.

COLLABORATE
®
Pro 900
Quick-Start Guide
COLLABORATE PRO 900
2
COMPONENTS INCLUDED
COLLABORATE Pro 900
COLLABORATE Pro
codec with power supply,
COLLABORATE Remote
control with dongle, and
HDMI cable.
910-2100-001
UNITE 100 PTZ camera,
power supply, DVI-I to
HDMI cable and RS232
Serial Control cable.
CONVERGE Pro 840T
Mixer, Beamforming
Microphone Array,
CONVERGE USB, cables
and power supplies.
Note: The Beamforming
Microphone Array
mounting kit must be
ordered separately.
QUICK-START GUIDE
3
MAKING THE CONNECTIONS
Connect the Beamforming Microphone Array to the CONVERGE Pro
840T, then connect the CONVERGE Pro 840T to the CONVERGE USB.
Connect the CONVERGE USB, UNITE 100 camera, Ethernet, and
monitor(s) to the COLLABORATE Pro codec as shown.
NOTE: Audio output and power connections not shown.
Ethernet Connection
CONVERGE Pro 840T
1080p HDMI Camera Video
USB Audio Transmit and Receive
CONVERGE USB
E-bus
HDMI
Output
Display Port
Output
UNITE
Camera
Camera Serial Control
E-bus From LINK Out
Beamforming Microphone
Array
CONVERGE PRO 840T
1 2 3 4
COLLABORATE PRO 900
4
CONNECTING THE REMOTE CONTROL DONGLE
The Remote Control includes a dongle that plugs into the FRONT USB
port on the codec.
QUICK-START GUIDE
5
CONFIGURING AUDIO INPUT AND OUTPUT
Loud Speakers
Amplifier
USB
Audio
Transmit and Receive
E-bus
LINK
Out
E-bus
LINK
In
CONVERGE USB
CONVERGE Pro Unit
E-bus
LINK
In
E-bus LINK Out
PoE (Power over Ethernet)
Beamforming Microphone
Array
COLLABORATE Pro Codec
NOTE: Power connections not shown.
CONVERGE PRO 840T
1 2 3 4
COLLABORATE PRO 900
6
CONFIGURING DISPLAY SETTINGS
After all peripherals are connected to the unit, turn the unit on.
Once COLLABORATE Pro is loaded – you will see your local camera
video on your screen.
Using the remote control, navigate to the display settings:
Settings > System > Display
According to your monitor capabilities, set to the maximum supported
resolution. If 2 monitors are connected to the unit, the display mode is
automatically changed to dual mode and you can set both monitors’
resolutions.
QUICK-START GUIDE
7
CONFIGURING AUDIO SETTINGS
The COLLABORATE Pro audio input and output is Converge Pro.
Verify this in COLLABORATE Settings > System > Audio
COLLABORATE PRO 900
8
CONFIGURING NETWORK SETTINGS
Using your remote control, navigate into the network settings:
Settings > Advanced > IP
Clearone.com
The COLLABORATE Pro obtains its IP automatically by default from the
DHCP server.
Uncheck the DHCP checkbox in order to manually configure network
settings.
QUICK-START GUIDE
9
CLEARONE CONTACTS
Europe & Oceana
Tel: +44.1454.616.977
Asia Pacific
Tel: +852.3590.4526
HEADQUARTERS:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Sales: 800-707-6694
Toll Free: 800.945.7730
Fax: 801.303.5711
TechSales
Tel: 800.707.6694
Technical Support
Tel: +800.283.5936
Latin America
Tel: +801.974.3621
Middle East
Tel: +852.3590.4526
© 2015 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice. QSG-0025-001 Revision 1.1, September, 2015
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

ClearOne COLLABORATE Pro 900 Quick start guide

Category
Video switches
Type
Quick start guide
This manual is also suitable for

ClearOne COLLABORATE Pro 900 is a video conferencing system that combines a codec, camera, microphone array, and mixer into a single, easy-to-use package. With its sleek design and powerful features, the COLLABORATE Pro 900 is perfect for small to medium-sized meeting rooms.

The COLLABORATE Pro 900's codec supports up to 1080p video resolution and features H.264 High Profile encoding for crystal-clear video quality. The camera has a wide field of view and 10x optical zoom, so you can easily see everyone in the room. The microphone array uses beamforming technology to focus on the voices of the people speaking, while reducing background noise. And the mixer provides echo cancellation and noise reduction to ensure that your audio is always clear.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI