Pro-Form GGEX72208.0 User manual

Brand: Pro-Form

Model: GGEX72208.0

Category: Fitness, gymnastics & weight training

Type: User manual

This manual is also suitable for

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

Serial

Number

Decal

USER’S MANUAL

Model No. GGEX61707.0

Serial No.

Write the serial number in the

space above for future reference.

QUESTIONS?

As a manufacturer, we are commit-

ted to providing complete customer

satisfaction. If you have questions,

or if parts are damaged or missing,

PLEASE DO NOT CONTACT THE

STORE; please contact Customer

Care.

IMPORTANT: You must note the

product model number and serial

number (see the drawing above)

before contacting us.

CALL TOLL-FREE:

1-877-776-4777

Mon.–Fri. 6 a.m.–6 p.m. MST

Sat. 8 a.m.–4 p.m. MST

ON THE WEB:

www.goldsgympowerflex.com

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT

The warning decal shown here

has been applied in the location

shown. If the decal is missing

or illegible, call the telephone

number on the front cover of

this manual and request a free

replacement decal. Apply the

decal in the location shown.

Note: The decal may not be

shown at actual size.

GOLD'S GYM is a registered trademark of Gold's Gym International, Inc. This product is manufactured and

distributed under license from Gold's Gym International, Inc.

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over the age of 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of the exercise cycle are ade-

quately informed of all precautions.

3. Your exercise cycle is intended for home use

only. Do not use your exercise cycle in a

commercial, rental, or institutional setting.

4. Keep your exercise cycle indoors, away from

moisture and dust. Place your exercise cycle

on a level surface, with a mat beneath it to

protect the floor or carpet. Make sure that

there is enough clearance around your exer-

cise cycle to mount, dismount, and use it.

5. Inspect and properly tighten all parts regular-

ly. Replace any worn parts immediately.

6. Keep children under age 12 and pets away

from your exercise cycle at all times.

7. Your exercise cycle should not be used by

persons weighing more than 250 lbs.

(113 kg).

8. Wear appropriate exercise clothes while

exercising; do not wear loose clothes that

could become caught on your exercise cycle.

Always wear athletic shoes for foot protec-

tion while exercising.

9. When adjusting the seat, insert the adjust-

ment knob into one of the holes in the seat

post. Do not insert the seat pin under the

seat post.

10. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

11. Keep your back straight while using your

exercise cycle; do not arch your back.

12. The exercise cycle does not have a free-

wheel; the pedals will continue to move until

the flywheel stops.

13. When you stop exercising, allow the pedals

to slowly come to a stop.

14. If you feel pain or dizziness while exercising,

stop immediately and cool down.

15. Use your exercise cycle only as described in

this manual.

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise cycle before using your exercise

cycle. ICON assumes no responsibility for personal injury or property damage sustained by or

through the use of this product.

IMPORTANT PRECAUTIONS

Congratulations for selecting the new GOLD’S GYM

POWER SPIN 230 R exercise cycle. Cycling is one of

the most effective exercises for increasing cardiovas-

cular fitness, building endurance, and toning the body.

The POWER SPIN 230 R exercise cycle offers a

selection of features designed to let you enjoy this

healthful exercise in the convenience and privacy of

your home.

For your benefit, read this manual carefully before

you use the exercise cycle. If you have questions

after reading this manual, please see the front cover

of this manual. To help us assist you, note the product

model number and serial number before contacting

us. The model number and the location of the serial

number decal are shown on the front cover of this

manual.

To avoid a registration fee for any service needed

under warranty, you must register the exercise

cycle at www.iconservice.com/registration.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Seat

Adjustment Knob

Pedal/Strap

Console

Water Bottle Holder*

Pulse Sensor

Wheel

Fan

Handlebar

*No water bottle is included

BEFORE YOU BEGIN

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-

ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included

tools, assembly requires your own Phillips screwdriver and an adjustable

wrench .

As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses

below each drawing is the key number of the part, from the PART LIST near the end of this manual. The second

number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a

part is not in the parts bag, check to see if it has been pre-assembled.

M10 x 75mm Carriage Bolt (51)–4

M10 Nylon

Locknut (63)–4

M8 Nylon

Locknut (60)–4

M8 Split

Washer (59)–5

M6 Washer

(55)–8

M6 x 38mm Button

Screw (48)–4

M6 x 42mm Button

Screw (49)–4

M8 x 25mm Button

Screw (33)–3

M8 x 70mm Button

Bolt (54)–2

M4 x 22mm

Screw (52)–2

M4 x 16mm

Screw (57)–4

3. Attach the Seat Frame (7) to the Handlebar (6) with

two M8 x 70mm Button Bolts (54), two M8 Split

Washers (59), and two M8 Nylon Locknuts (60). Do

not tighten the Button Bolts yet.

While another person lifts the front of the Frame (1)

slightly, attach the Front Stabilizer (3) to the Frame

with two M10 x 75mm Carriage Bolts (51) and two

M10 Nylon Locknuts (63).

See the inset drawing. Loosen the Adjustment Knob

(17), slide the Rear Frame (2) out of the Frame (1),

and then retighten the Adjustment Knob.

Note: After the exercise cycle is assembled, adjust the

Seat (not shown) to the proper position. As you pedal,

there should be a slight bend in your knees when the

pedals are in the farthest forward position. Loosen the

Adjustment Knob (17), slide the Rear Frame (2) for-

ward or backward, and retighten the Adjustment Knob.

2. Attach the Wheels (18) to the Rear Stabilizer (4) with

two M8 Nylon Locknuts (60). Press a Wheel Cap (19)

onto each Wheel.

Attach the Rear Stabilizer (4) to the Rear Frame (2)

with two M10 x 75mm Carriage Bolts (51) and two

M10 Nylon Locknuts (63).

To make assembly easier, read the information

on page 5 before you begin assembling the

exercise cycle.

4. Attach the Backrest (5) to the Seat Frame (7) with

four M6 x 38mm Button Screws (48) and four M6

Washers (55). Do not tighten the Button Screws

yet.

5. Have another person hold the Seat Frame (7) under

the Rear Frame (2) as shown. Attach the Seat Frame

and the Seat (12) to the Rear Frame with four M6 x

42mm Button Screws (49) and four M6 Washers (55).

See step 3. Tighten the two M8 x 70mm Button

Bolts (54).

See step 4. Tighten the four M6 x 38mm Button

Screws (48).

7. Connect the console wire harness to the Upper Wire

Harness (36). Insert the console wire harness into the

Upright (13). Attach the Console (16) to the Upright

with four M4 x 16mm Screws (57).

Attach the Bottle Holder (8) to the Upright (13) with

two M4 x 22mm Screws (52).

Console

Wire

Harness

6. The Console (16) can be operated with four 1.5V “D”

batteries (not included); alkaline batteries are recom-

mended. IMPORTANT: If the exercise cycle has

been exposed to cold temperatures, allow it to

warm to room temperature before inserting batter-

ies into the Console. If you do not do this, the

console displays or other electronic components

may become damaged. Press the tab on the battery

cover and remove the battery cover. Insert four batter-

ies into the console; make sure that the batteries

are oriented as shown. Then, reattach the battery

cover.

The Console (16) can also be operated with an

optional power supply (not included). To purchase a

power supply, call the telephone number on the

front cover of this manual. To avoid damaging the

console, use only a manufacturer-supplied power

supply. Plug one end of the power supply into the

jack on the console; plug the other end into an outlet

installed in accordance with all local codes and ordi-

nances.

Batteries

Battery

Cover

Tab

8. Connect the Upper Wire Harness (36) to the Lower

Wire Harness (65). Attach the Upright (13) to the

Frame (1) with three M8 x 25mm Button Screws (33)

and three M8 Split Washers (59). Tip: Avoid pinch-

ing the Wire Harnesses during this step.

9. Identify the Left Pedal (24), which is marked with an

“L” sticker. Using an adjustable wrench, firmly tight-

en the Left Pedal

counterclockwise

into the left arm of

the Crank (31). Tighten the Right Pedal (not shown)

clockwise

into the right arm of the Crank. IMPOR-

TANT: Tighten both Pedals as firmly as possible.

After using the exercise cycle for one week,

retighten the Pedals. For best performance, keep

the Pedals tightened.

Adjust the Left Pedal Strap (25) to the desired posi-

tion, and press the end of the Left Pedal Strap onto

the tab on the Left Pedal (24). Adjust the Right Pedal

Strap (not shown) in the same way.

10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is

completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.

HOW TO OPERATE THE EXERCISE CYCLE

HOW TO ADJUST THE SEAT FRAME

For effective exer-

cise, the seat should

be in the proper

position. As you

pedal, there should

be a slight bend in

your knees when the

pedals are in the

most forward posi-

tion. To adjust the

seat frame, first

loosen the adjust-

ment knob on the frame. Slide the seat frame forward

or backward to the desired position. Then, retighten

the adjustment knob.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal

straps, first pull the

ends of the straps off

the tabs on the ped-

als. Adjust the straps

to the desired posi-

tion, and then press

the ends of the straps

onto the tabs.

Strap

Tab

Knob

Seat

FEATURES OF THE CONSOLE

The advanced console offers an array of features

designed to make your workouts more effective and

enjoyable. When you use the manual mode of the

console, you can change the resistance of the pedals

with the touch of a button. As you exercise, the con-

sole will provide continuous exercise feedback. You

can even measure your heart rate using the handgrip

pulse sensor.

The console also offers eight preset workouts. Each

workout automatically changes the resistance of the

pedals and prompts you to increase or decrease your

pedaling speed as it guides you through an effective

workout.

You can even connect your MP3 player or CD player

to the console’s sound system and listen to your

favorite music or audio books while you exercise.

To use the manual mode of the console, follow the

steps beginning on page 12. To use a preset

workout, see page 14. To use the sound system,

see page 14.

Note: If there is a sheet of clear plastic on the face of

the console, remove the plastic.

CONSOLE DIAGRAM

HOW TO USE THE MANUAL MODE

1. Press any button on the console or begin ped-

aling to turn on the console.

When you turn on the console, the displays and

the workout target pacer will light. A tone will then

sound and the console will be ready for use.

2. Select the manual mode.

When you turn on the console, the manual mode

will be selected. If you have selected a workout,

reselect the manual mode by pressing one of the

eight workout buttons on the console repeatedly

until a track appears in the left display.

3. Begin pedaling and change the resistance of

the pedals as desired.

As you pedal, change

the resistance of the

pedals by pressing the

Magnetic Resistance

increase and

decrease buttons.

There are ten resistance levels. Note: After you

press the buttons, it may take a moment for the

pedals to reach the selected resistance level.

4. Follow your progress with the displays.

The upper right

display can show the

elapsed time, the

approximate number

of calories you have

burned, and the dis-

tance you have pedaled. The display will change

information every few seconds.

The lower right

display can show your

pedaling speed and the

resistance level of the

pedals. The display will

change modes every

few seconds. The display will also show your heart

rate when you use the handgrip pulse sensor (see

step 5 on page 13).

The left display will

show a track repre-

senting 1/4 mile. As

you exercise, indicators

will appear in succes-

sion around the track

until the entire track

appears. The track will

then disappear and the indicators will again begin

to appear in succession

To change the display mode, press the Display but-

ton repeatedly until the desired exercise information

appears in the upper or lower right display. After

several seconds, the displays will change modes

automatically as before.

Note: The console can

display speed and dis-

tance in either miles or

kilometers. The letters

MPH or Km/H will

appear while your ped-

aling speed is dis-

played to show which unit of measurement is

selected. To change the unit of measurement, first

press the Display button for a few seconds until the

display is blank; then, release the Display button.

Press the Fan button repeatedly to change the unit

of measurement. You can also adjust the volume of

the console tones at this time. Press the Magnetic

Resistance increase and decrease buttons to select

a volume level between 1 and 5. When you have

selected the desired unit of measurement and vol-

ume level, press the Display button again.

5. Measure your heart rate if desired.

If there are

sheets of clear

plastic on the

metal contacts

on the handgrip

pulse sensor,

remove the plas-

tic. In addition,

make sure that

your hands are

clean. To measure

your heart rate,

hold the handgrip pulse sensor with your palms

resting against the metal contacts. Avoid moving

your hands or gripping the contacts tightly.

When your pulse is detected, a heart-shaped sym-

bol will flash in the lower right display each time

your heart beats, one or two dashes will appear,

and then your heart rate will be shown. For the

most accurate heart rate reading, hold the con-

tacts for at least 15 seconds.

If your heart rate is not shown, make sure that

your hands are positioned as described. Be care-

ful not to move your hands excessively or to

squeeze the metal contacts tightly. For optimal

performance, clean the metal contacts using a soft

cloth; never use alcohol, abrasives, or chemi-

cals to clean the contacts.

6. Turn on the fan if desired.

The fan has high, low, and auto speed settings;

while the auto mode is selected, the speed of the

fan will automatically increase or decrease as you

increase or decrease your pedaling speed. Press

the Fan button repeatedly to select a fan speed or

to turn off the fan. Note: If the pedals do not move

for about thirty seconds, the fan will turn off auto-

matically.

Pivot the thumb tab

on the right side of

the fan to adjust

the fan angle.

To turn off the fan, press the Fan button again.

Note: If the pedals do not move for about thirty

seconds, the fan will automatically turn off to con-

serve the batteries.

7. When you are finished exercising, the console

will turn off automatically.

If the pedals do not move for several seconds, a

series of tones will sound and the console will

pause.

If the pedals do not move for about five minutes,

the console will turn off and the displays will be

reset.

Contacts

Thumb

Tab

HOW TO USE A PRESET WORKOUT

1. Press any button on the console or begin ped-

aling to turn on the console.

See step 1 on page 12.

2. Select a preset workout.

To select one of the eight preset workouts, press

one of the eight buttons on the right and left side

of the console.

When you select a preset workout, the name of

the workout and the maximum resistance level will

appear in the display for a few seconds. A profile

of the resistance levels of the workout will also

scroll across the left side of the display.

3. Begin pedaling to start the workout.

Each workout is divided into either 20 or 30 one-

minute segments. One resistance level and one

target pace setting are programmed for each seg-

ment. Note: The same resistance level and/or tar-

get pace setting may be programmed for consecu-

tive segments.

During the workout, the workout profile will show

your progress (see the drawing above). The flash-

ing segment of the profile represents the current

segment of the workout. The height of the flashing

segment indicates the resistance level for the cur-

rent segment. At the end of each segment of the

workout, a series of tones will sound and the next

segment of the profile will begin to flash. If a differ-

ent resistance level is programmed for the next

segment, the resistance level will appear in the

display for a few seconds to alert you. The resis-

tance of the pedals will then change.

During the workout, the workout target pacer will

prompt you to keep your pedaling speed near the

target pace setting for the current segment. When

a left indicator lights, increase your speed; when a

right indicator lights, decrease your speed. When

the center indicator lights, maintain your current

speed. IMPORTANT: The workout target pacer

is intended only to provide a goal. Make sure

to pedal at a speed that is comfortable for you.

If the resistance level for the current segment is

too high or too low, you can manually override the

resistance level by pressing the Magnetic

Resistance increase or decrease buttons.

However, when the current segment ends, the

resistance of the pedals will automatically adjust to

the resistance level programmed for the next seg-

ment.

If you stop pedaling for several seconds, a series

of tones will sound and the workout will pause. To

restart the workout, simply resume pedaling. The

workout will continue until the last segment of the

workout ends.

Follow your progress with the displays.

See step 4 on page 12.

Measure your heart rate if desired.

See step 5 on page 13.

6. Turn on the fan if desired.

See step 6 on page 13.

When you are finished exercising, the console

will turn off automatically.

See step 7 on page 13.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console’s

sound system while you exercise, plug an audio cable

(not included) into the jack on the console and into a

jack on your MP3 player or CD player; make sure

that the audio cable is fully plugged in.

Next, press the play button on your MP3 player or CD

player. Adjust the volume of the speakers using the

volume control on your MP3 player or CD player.

Profile

Inspect and properly tighten all parts of the exercise

cycle regularly. Replace any worn parts immediately.

To clean the exercise cycle, use a damp cloth and a

small amount of mild soap. IMPORTANT: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

BATTERY REPLACEMENT

If the console display becomes dim, the batteries

should be replaced; most console problems are the

result of low batteries. To replace the batteries, see

assembly step 6 on page 8.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. To adjust the reed

switch, you must first remove the Left Side Shield (9).

Using an adjustable wrench, turn the Left Pedal (24)

clockwise and remove it. Next, remove the M4 x

16mm Screws (57) and the M4 x 25mm Screw (45).

Then, carefully remove the Left Side Shield.

With the left side shield removed, locate the Reed

Switch (43). Turn the Crank (31) until the Magnet (38)

is aligned with the Reed Switch. Next, loosen, but do

not remove, the indicated M4 x 16mm Screw (57).

Slide the Reed Switch slightly closer to or away from

the Magnet, and then retighten the Screw. Turn the

Crank for a moment. Repeat until the console dis-

plays correct feedback. When the Reed Switch is cor-

rectly adjusted, reattach the left side shield and the

left pedal.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly,

see step 5 on page 13.

MAINTENANCE AND TROUBLESHOOTING

These guidelines will help you to plan your exercise

program. For detailed exercise information, obtain a

reputable book or consult your physician. Remember,

proper nutrition and adequate rest are essential for

successful results.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your

cardiovascular system, exercising at the proper inten-

sity is the key to achieving results. You can use your

heart rate as a guide to find the proper intensity level.

The chart below shows recommended heart rates for

fat burning and aerobic exercise.

To find the proper intensity level, find your age at the

bottom of the chart (ages are rounded off to the near-

est ten years). The three numbers listed above your

age define your “training zone.” The lowest number is

the heart rate for fat burning, the middle number is the

heart rate for maximum fat burning, and the highest

number is the heart rate for aerobic exercise.

Burning Fat—To burn fat effectively, you must exer-

cise at a low intensity level for a sustained period of

time. During the first few minutes of exercise, your

body uses

carbohydrate calories

for energy. Only after

the first few minutes of exercise does your body begin

to use stored

fat calories

for energy. If your goal is to

burn fat, adjust the intensity of your exercise until your

heart rate is near the lowest number in your training

zone. For maximum fat burning, exercise with your

heart rate near the middle number in your training

zone.

Aerobic Exercise—If your goal is to strengthen your

cardiovascular system, you must perform aerobic

exercise, which is activity that requires large amounts

of oxygen for prolonged periods of time. For aerobic

exercise, adjust the intensity of your exercise until

your heart rate is near the highest number in your

training zone.

WORKOUT GUIDELINES

Warming up—Start with 5 to 10 minutes of stretching

and light exercise. A warm-up increases your body

temperature, heart rate, and circulation in preparation

for exercise.

Training Zone Exercise—Exercise for 20 to 30 min-

utes with your heart rate in your training zone. (During

the first few weeks of your exercise program, do not

keep your heart rate in your training zone for longer

than 20 minutes.) Breathe regularly and deeply as you

exercise–never hold your breath.

Cooling down—Finish with 5 to 10 minutes of

stretching. Stretching increases the flexibility of your

muscles and helps to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three

workouts each week, with at least one day of rest

between workouts. After a few months of regular exer-

cise, you may complete up to five workouts each

week, if desired. Remember, the key to success is to

make exercise a regular and enjoyable part of your

everyday life.

EXERCISE GUIDELINES

WARNING: Before beginning

this or any exercise program, consult your

physician. This is especially important for

persons over the age of 35 or persons with

pre-existing health problems.

The pulse sensor is not a medical device.

Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

intended only as an exercise aid in determin-

ing heart rate trends in general.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right.

Move slowly as you stretch—never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from

your hips. Allow your back and shoulders to relax as you reach

down toward your toes as far as possible. Hold for 15 counts,

then relax. Repeat 3 times. Stretches: Hamstrings, backs of

knees, and back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot

toward you and rest it against the inner thigh of your extended

leg. Reach toward your toes as far as possible. Hold for 15

counts, then relax. Repeat 3 times for each leg. Stretches:

Hamstrings, lower back, and groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your

hands against a wall. Keep your back leg straight and your back

foot flat on the floor. Bend your front leg, lean forward, and move

your hips toward the wall. Hold for 15 counts, then relax. Repeat

3 times for each leg. To cause further stretching of the achilles

tendons, bend your back leg as well. Stretches: Calves, achilles

tendons, and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp

one foot with your other hand. Bring your heel as close to your

buttocks as possible. Hold for 15 counts, then relax. Repeat 3

times for each leg. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward.

Pull your feet toward your groin as far as possible. Hold for 15

counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip

muscles.

1 1 Frame

2 1 Rear Frame

3 1 Front Stabilizer

4 1 Rear Stabilizer

5 1 Backrest

6 1 Handlebar

7 1 Seat Frame

8 1 Bottle Holder

9 1 Left Side Shield

10 1 Right Side Shield

11 2 Stabilizer Endcap

12 1 Seat

13 1 Upright

14 1 Front Bushing

15 1 Rear Bushing

16 1 Console

17 1 Adjustment Knob

18 2 Wheel

19 2 Wheel Cap

20 1 Frame Pad

21 1 Frame Stop

22 1 Reed Switch Clamp

23 1 C-magnet Bracket

24 1 Left Pedal

25 1 Left Pedal Strap

26 1 Right Pedal

27 1 Right Pedal Strap

28 1 Resistance Motor

29 1 Flywheel Axle

30 1 Belt

31 1 Pulley/Crank

32 1 C-magnet

33 3 M8 x 25mm Button Screw

34 1 Flywheel

35 1 Crank Bearing Assembly

36 1 Upper Wire Harness

37 2 Bearing

38 1 Magnet

39 2 Tension Bolt

40 1 Tension Bracket

41 1 M8 Washer

42 1 Flywheel Washer

43 1 Reed Switch/Wire

44 2 Handlebar Endcap

45 3 M4 x 25mm Screw

46 1 Resistance Cable

47 1 Return Spring

48 4 M6 x 38mm Button Screw

49 4 M6 x 42mm Button Screw

50 3 M4 x 16mm Flat Head Screw

51 4 M10 x 75mm Carriage Bolt

52 2 M4 x 22mm Screw

53 1 5mm Spacer

54 2 M8 x 70mm Button Bolt

55 8 M6 Washer

56 1 M8 x 20mm Button Bolt

57 16 M4 x 16mm Screw

58 4 M5 Washer

59 5 M8 Split Washer

60 5 M8 Nylon Locknut

61 4 M6 Nut

62 2 M8 Jam Nut

63 4 M10 Nylon Locknut

64 1 M6 x 38mm Bolt

65 1 Lower Wire Harness

* – User’s Manual

* – Hex Key

Note: Specifications are subject to change without notice. See the back cover of this manual for information

about ordering replacement parts. *These parts are not illustrated.

PART LIST—Model No. GGEX61707.0 R0208A

Key No. Qty. Description Key No. Qty. Description

EXPLODED DRAWING—Model No. GGEX61707.0 R0208A

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and

material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-

chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-

ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.

All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped

to a service center, freight charges to and from the service center will be the customer’s responsibility. For

in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend

to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,

improper or abnormal usage or repairs not provided by an ICON authorized service center; products used

for commercial or rental purposes; or products used as store display models. No other warranty beyond

that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-

nection with the use or performance of the product or damages with respect to any economic loss, loss

of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other

consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-

dental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of

merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth

herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above

limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to

provide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED

DRAWING near the end of this manual)

Pro-Form GGEX72208.0 User manual

Brand: Pro-Form

Model: GGEX72208.0

Category: Fitness, gymnastics & weight training

Type: User manual

This manual is also suitable for

Download PDF

report

Pro-Form GGEX72208.0 User manual

This manual is also suitable for

Pro-Form GGEX72208.0 User manual

Related papers

Other documents