Hyundai H-LED3202 User manual

ТЕЛЕВИЗОР

ЦВЕТНОГО ИЗОБРАЖЕНИЯ

ЖИДКОКРИСТАЛЛИЧЕСКИЙ

LED TV

Руководство по эксплуатации Instruction manual

H-LED3202

Downloaded From TV-Manual.com Manuals

Table of contents

Before you start

Utilization of the product

Important safeguards

Accessories

Connection

Outdoor antenna connection

Other connections

Operation

Control elements

Front and lateral panel

Back panel

Remote controller

Changing the battery

General operations

AV signal sources

Teletext operations

PC screen

OSD operation

Channel setting

Picture setting

Sound setting

Time setting

Option setting

USB operation

Turn on USB mode

Photo playback

Music playback

Video playback

Text playback

General information

Troubleshooting

Causes of interference

Specifications

2 3

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Downloaded From TV-Manual.com Manuals

2 3

Table of contents Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Before connecting the unit to the power

source, make sure that the voltage designation

of the unit corresponds to the local electrical

supply.

• Please unplug the power cord from the AC

outlet and contact a service center for repair

if following occurs: any obvious abnormality

appears in the unit, such as smoky, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit should only be connected to a

wall socket having grounding.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When unplugging the plug, always hold

the wide slot, do not touch the metal part, and

do not destroy, refit, twist, pull or roast the

power cord.

• Please contact the service center

immediately if you found that the core is

showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-press the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

Downloaded From TV-Manual.com Manuals

4

Before you start

the burning-light, direct sunlight, vibration,

high-temperature and humidity. Store the

product with a temperature from –20

0

C ~50

0

C;

otherwise you may destroy the product.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at list 10cm at

above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the

LCD TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you

move this product with the power cord or the

connection cable connected, the damaged

power cord, connection cable or connection

terminal may cause the fire, the electric shock

or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat exchange

in normal working mode, thus please do not

let children or anyone who is sensitive of

temperature to touch.

All images provided herein are schematic

drawings of real objects and may differ

from their real images.

Accessories

1. LED TV 1 pc

2. Remote controller 1 pc

3. Mini YPbPr cable 1 pc

4. Mini AV cable 1 pc

5. Stand installation sheet 1 pc

6. Screw M4 x 14 5 pcs

7. Stand 1 pc

8. Batteries ААА 1,5 V 2 pcs

9. Consumer information 1 pc

10. Warranty card 1 pc

11. Instruction manual 1 pc

Downloaded From TV-Manual.com Manuals

5

Сonnection

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω

impedance converter to plug in antenna input

terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including

DVD, VCDR, CAMCORDER and PC) to the

proper stereo audio input jacks ‘L’ and ‘R’.

• Connect the video source to the composite

video jack by RCA cable.

• If the video source has a SCART output

jack, you can connect the signal to the monitor

by the SCART cable.

• When using the LCD as a computer

screen, connect the PC to the VGA jack from

the monitor by the relevant cable.

• This unit has PC audio in jack. Connect

this jack to PC main unit with related audio

cable in PC mode and adjust the volume to

Connection

what you want.

• If the video source has a HDMI output

jack, you can connect the signal to the monitor

by the HDMI cable.

• Mini component video input YPbPr is

intended for receiving component video signal

if connected to the component output of

external signal source with the cable included.

To receive audio signal use the Mini AV input.

• Connect your headphones or earphones

(not included) to the headphone socket of

this unit. When earphones are connected, the

sound output through the built-in speakers of

this unit is mute.

• If the video source has a сoaxial input

jack, you can connect the signal source to the

coaxial input of the unit by related cable.

75 Ohm co-axis cable

TVRF antenna jack

Antenna cable connector

Downloaded From TV-Manual.com Manuals

6

Operation

Control elements

Front and lateral panel

1. INPUT button

2. MENU button

3. CH+ button

4. CH- button

5. VOL+ button

6. VOL- button

7. IR sensor

8. POWER button

9. Power indicator

Back panel

1. HDMI1/HDMI2/HDMI3 inputs

2. SCART connector

3. VGA input

4. USB port

5. Coaxial digital audio output

6. Headphone output

7. TVRF antenna socket

8. Mini AV input

9. Mini YPbPR input

10. Left audio input

11. Right audio input

12. Composite video input

13. PC audio input

1 2 3

4

5

6

7

8

9

10

11

12

13

SCART

1

2

3

4

5

6

8

7

9

Downloaded From TV-Manual.com Manuals

7

Operation

Remote controller (RC)

1. POWER button

2. Number buttons

3. PICTURE button

4. SOUND button

5. VOL+/VOL- buttons

6. MUTE button

7. EXIT button

8. OK button/cursor buttons (

/ / /

)

9. button

10. button

11. FAV/REPEAT button

12. ZOOM/ASPECT button

13. STEP/HOLD button

14. SLOW/TV/TEXT button

15. /INDEX button

16. /SUBPAGE button

17. Red button

18. Green button

19. INPUT button

20.

button

21. DISPLAY button

22. SLEEP button

23. CH+/CH- buttons

24. MENU button

25. button

26. GOTO button

27. FAV+/A-B button

28. FAV-/ROOT button

29. SUBTITLE button

30. NICAM/A2 button

31. SIZE/ button

32. REVEAL/ button

33. Blue button

34. Yellow button

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert two AAA batteries into the battery

compartment making sure that the correct

polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote

sensor within 8 meters and within 30 degrees

at the left or the right side.

• Take the battery out of the RC if it is not

used for a long time. Do not mix new and used

batteries or different types of batteries. Weak

batteries can leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high humidity.

1

2

3

4

5

6

7

8

9

10

26

25

24

23

22

21

20

19

11

27

12

28

13

29

14

30

15

31

16

32

17

18

33

34

Downloaded From TV-Manual.com Manuals

8 9

Operation Operation

General operations

• Press POWER button on the unit or on the

RC to switch on the power, the indication light

will be in green color. Press POWER button

again to switch the unit to standby mode, and

the light will be in red color.

• The picture setup, sound setup, previous

channel can be memorized before you switch

off the unit. The unit will restart under the

previous state when you switch it on again.

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly to

increase the volume.

• Press SLEEP button repeatedly to set the

sleep time.

• In TV mode press CH-/CH+ buttons to

select previous or next channels; or press

number buttons to enter a channel number

directly; or press [-/--] button until the screen

displays ‘-’ or ‘--’, then use number buttons to

enter a channel number from 1 to 199.

• Press

button on the RC to select

from the present channel and the previously

displayed channel.

• Press PICTURE button repeatedly to cycle

through the available video picture modes from

the following 4 types: Standard => Dynamic =>

User => Mild.

• Press SOUND button repeatedly to cycle

through the available sound modes from the

following 5 types: Standard => Music => Movie

=> Sports => User.

• Press MUTE button to cut off sound, press

this button again or adjust volume to resume

the sound.

• Press DISPLAY button to display the

preset TV channel play information.

• Press ZOOM/ASPECT button repeatedly

to select a screen display size from the

available list. Available aspects may differ for

different signal sources.

AV signal sources

Press INPUT button, then press /

cursor buttons or CH+/CH- buttons on

the panel to cycle through the available source

list as follows: TV - AV1 - AV2 - SCART - Mini

YPbPR - HDMI1 - HDMI2 - HDMI3 - PC -

Media. Press OK button on the RC to confirm.

TELETEXT operations (option)

Select TV channel in order to pick up the

picture signal of Teletext. Teletext button

functions are as follows:

TV/TEXT: Press TV/TEXT button to enter

into TEXT mode. Press this button again to

return to the channel you are watching.

HOLD: Press this button to stop the move

to the next page. Press this button again to

cancel operation.

INDEX: Press this button to go to index page.

SIZE: Press this button to enlarge the text

shown on the teletext screen, and one half of

page could be shown. Press this button again

to view the second half of this page. Press this

button third time to normal size text page view.

REVEAL: Press this button to reveal the

cancelled information. Press this button again

to cancel the information.

SUBPAGE: Press this button to select

subpage. Enter the number of sub page and use

numeric buttons in the format 0001 for sub page

1. The teletext will search for the sub page.

Red/Green/Yellow/Blue buttons: Press

these 4 color buttons to access directly to

corresponding color page displayed at the

lower parts of teletext screen.

PC screen

Select PC input mode. The unit has a VGA

jack for a normal computer. Connect the

monitor to a PC by this jack and the unit can

be used as the monitor for the PC.

OSD operation

Press MENU button to enter the OSD menu.

Use / buttons to select a setting

page displayed on the screen. Press

button

to go the page. Press / buttons to

Downloaded From TV-Manual.com Manuals

8 9

Operation Operation

select the needed item, then use / buttons

to select available setting or to adjust the

selected item. Press OK button to confirm.

After setting, press MENU button to return

to the root menu or press EXIT button to exit

menu setting.

Channel setting

CHANNEL

Auto Tuning

ATV Manual Tuning

Programme Edit

Move Menu OK exit

• Auto tuning: enter the auto tuning menu.

Press OK button to start automatic tuning. To

exit the process, press MENU or EXIT button.

• ATV Manual tuning: press OK button to

enter Manual Tuning menu:

Menu

Current CH

ATV Manual Tuning

Color system

Sound system

Fine-tune

AFC

Search

Color system: select PAL/AUTO.

Sound system: select I/BG/DK.

Fine tune: press / buttons to perform

fine adjustment of the current frequency.

AFC: set automatic frequency control on/off.

Search: press

/ buttons to perform

manual search.

• Programme edit: press OK button to

enter Programme edit menu:

MenuFav

RenameDelete Move Skip

OK

Programme Edit

1 C-04

2 S-44

3 S-05

4 C-05

5 S-09

6 S-10

7 C-06

Delete: select a channel, then press Red

button on the RC to delete the channel.

Rename: select a channel, then press Green

button on the RC. Press cursor buttons to enter

the name of the channel.

Move: select a channel, then press Yellow

button on the RC. Press / buttons

to change the position of the selected channel.

Press Yellow button again to confirm.

Skip: select a channel, then press Blue

button to lable the channel. Now this channel

will be skipped when you list through channels

with CH+/CH- buttons.

You can press FAV button on the RC to

display the favorite channel list; press FAV+/

FAV- buttons to navigate in the favorite list.

Downloaded From TV-Manual.com Manuals

10

Operation

Picture setting

PICTURE

Picture mode

Contrast

Brightness

Color

Tint

Sharpness

Color temperature

Noise reduction

Move Menu OK exit

• Picture Mode: Standard/Dynamic/User/

Mild

• Contrast (available if User picture mode

is selected)

• Brightness (available if User picture mode

is selected)

• Color (available if User picture mode is

selected)

• Tint (available in NTSC mode only)

• Sharpness (available if User picture mode

is selected)

• Color temperature: select Medium/Cool/

Warm.

• Noise reduction: select Off/Low/Middle/

High.

Sound setting

SOUND

Sound mode

Treble

Bass

Balance

Auto volume

SPDIF mode

Move Menu OK exit

• Sound Mode: Standard/Music/Movie/

Sports/User.

• Treble (available if User sound mode is

selected)

• Bass (available if User sound mode is

selected)

• Balance: adjust output between left and

right speakers.

• Auto volume: set ON/OFF automatic

control of volume.

• SPDIF mode: select when the unit

connected through coaxial out.

Time setting

TIME

Sleep Timer

Auto Sleep

OSD Timer

Move Menu OK exit

• Sleep timer: set time until automatical

switch-off: 10 min/20 min/30 min/60 min/90

min/120 min/180 min/240 min/off.

• Auto sleep: select time after which the

unit will automatically turn off if no action was

done: 3H/4H/5H.

• OSD timer: select the time of OSD display

on the screen.

Downloaded From TV-Manual.com Manuals

11

Operation

Photo playback

As you select photo in the file type menu,

following screen will be displayed, in which you

can press cursor buttons to select an object

and press OK button to confirm your selection:

PHOTO

Delete

1 2 3 4

1. Return to previous menu.

2. Current file name.

3. File preview window.

4. Current file information.

You can also press Red button on the RC to

delete the current file.

When you select a file and press OK button,

following menu will be shown, in which you can

press cursor buttons to select an object and

press OK button to perform the function:

1 2 3 4 5 6 7 8 9

1. File name

2. Pause. Play/pause the photo show.

3. Previous. Go to previous photo.

4. Next. Go to next photo.

Option setting

OPTION

OSD language

Aspect ratio

Blue screen

Key lock

Reset

Software update (USB)

Move Menu OK exit

• OSD language: select the OSD language.

• Aspect ratio: select 4:3/16:9/Zoom1/

Zoom2.

• Blue screen: set on/off blue screen active

when there’s no signal.

• Key lock: set on to make all buttons on

the panel invalid.

• Reset: Press OK button to reset all

settings.

• Software update: press OK button to

enter the software update menu.

In this manual, the OSD Menu maybe

changed and different from your real TV’s screen

without further notice. This manual is just a

sample to help you how to operate menu setting.

USB operation

Turn on USB mode

Insert a USB device into the USB port of the

unit. Press repeatedly INPUT button to select

Media source. The screen will show file type

menu; press / buttons to select a file

type you want, then press OK button to confirm.

USB capacity supported: up to 250 Gb.

For correct and satisfactory operation, licensed

USB devices of famous brands should be

used with this unit. Avoid using USB devices of

unknown brands.

Downloaded From TV-Manual.com Manuals

12 13

Operation General information

5. Stop. Stop photo show. You can also press

button on the RC to exit photo show mode.

6. Repeat. Select a repeat mode: Repeat All/

Repeat 1/Repeat None. You can also press

REPEAT button on the RC for this operation.

7. Music. Play/pause the music.

8. Playlist. Show the playlist on the screen

and select files for playback with /

buttons. Press

button, then CANCEL button

to hide the playlist.

9. Info. Display file information.

10. Zoom in/out (not shown). You can also

press ZOOM button on the RC for this operation.

11. Move view (not shown). Move the photo

in zoom-in mode.

Music playback

When you select music file type, following

menu will be shown, in which you can press

cursor buttons to select an object and press

OK button to perform the function:

1 2 3 4 5 6 7 8 9 10

1. File name

2. Pause. Play/pause the track.

3. Fast backward.

4. Fast forward.

5. Previous. Go to previous track.

6. Next. Go to next track.

7. Stop. Stop music playback. You can also

press button on the RC to stop playback.

8. Repeat. Select a repeat mode: Repeat All/

Repeat 1/Repeat None. You can also press

REPEAT button on the RC for this operation.

9. Mute. Turn of/on the sound.

10. Elapsed/total track time.

11. Playlist (not shown). Show the playlist

on the screen and select files for playback with

/ buttons. Press button, then

CANCEL button to hide the playlist.

12. Info (not shown). Display file information.

13. Goto time (not shown). Set the time to

play a track from. You can also press GOTO

button on the RC for this operation.

Video playback

When you select video file type, following

menu will be shown, in which you can press

cursor buttons to select an object and press

OK button to perform the function:

1 2 3 4 5 6 7 8 9 10

1. File name

2. Pause. Play/pause the file. You can also

press and buttons on the RC to perform this

functions.

3. Fast backward. You can also press

button on the RC to perform this function.

4. Fast forward. You can also press

button on the RC to perform this function.

5. Previous. Go to previous chapter. You can

also press button on the RC to perform this

function.

6. Next. Go to next chapter. You can also

press button on the RC to perform this

function.

7. Stop. Stop video playback. You can also

press button on the RC to stop playback.

8. Repeat. Select a repeat mode: Repeat All/

Repeat 1/Repeat None. You can also press

Downloaded From TV-Manual.com Manuals

12 13

Operation General information

REPEAT button on the RC for this operation.

9. A-B repeat. Press OK button to set the

initial and final points of a video fragment to

repeat. You can also press A-B button on the

RC for this operation.

10. Elapsed/total video time.

11. Playlist (not shown). Show the playlist

on the screen and select files for playback with

/ buttons.

12. Info (not shown). Display file information.

13. Slow forward (not shown). You can also

press SLOW button on the RC for this operation.

14. Step forward (not shown). Press

button

to cancel. You can also press STEP button on

the RC for this operation.

15. Goto time (not shown). Set the time to

play a video from. You can also press GOTO

button on the RC for this operation.

16. Zoom in/out (not shown). You can also

press ZOOM button on the RC for this operation.

17. Aspect ratio (not shown).

18. Move view (not shown). Move the photo

in zoom-in mode.

You can press ROOT button on the RC

to go back to the root menu of the USB. You

can press SUBTITLE button to switch on/off

the subtitles.

Text playback

When you select a file and press OK button,

following menu will be shown, in which you can

press cursor buttons to select an object and

press OK button to perform the function:

1 2 3 4 5 6 7 8 9

1. File name

2. Previous. Go to previous page of the text.

3. Next. Go to next page of the text.

4. Previous file.

5. Next file.

6. Stop. Stop text display. You can also press

button on the RC to exit text show mode.

7. Music. Play/pause the music.

8. Playlist. Show the playlist on the screen

and select files for playback with

/

buttons.

9. Info. Display file information.

Downloaded From TV-Manual.com Manuals

14

General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, sharpness, color

and volume are all in the minimum

value or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, sharpness, color and

volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

PC Picture is not

in the middle of

the screen

Picture is not well adjusted. Adjust H/V position manually to

adjust it.

No sound No audio signal or the signal cord is

im-properly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of

diathermy equipment from a nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long distant stations result in an instead picture and give the

effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,

hills, aircraft, etc. is minimized by correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture

or make the picture roll.

Downloaded From TV-Manual.com Manuals

15

General information

Specifications

Size (diagonal) 32” (81 cm)

Brightness 250 cd/m

2

Contrast 3000:1

Response time 6.5 ms

Resolution 1366 x 768

Aspect ratio 16:9

Color system PAL, SECAM

Sound system DK, I, BG

USB support up to 250 Gb

NICAM STEREO 2 x 8 W

AV RCA in +

Coaxial out +

AV2 in +

PC audio input +

HDMI 3 pcs

VGA +

SCART +

Mini YPbPr +

RF antenna +

Headphone out +

Russian and English OSD +

Progressive scan +

Digital comb filter +

Quantity of channels 199

Teletext 1000 pages

Power supply ~100 - 240 V, 50/60 Hz

Power consumption 120 W

Unit dimensions 780 x 200 x 550 mm

Net/Gross weight 9.2 kg/11.8 kg

The LCD panel is a high technology product with many thin film transistors that can

give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen

as a fixed point of blue, green, red, black or white, please note that this does not affect the

performance of your LCD TV.

Warning: Specifications may be subject to change without notice for improvement.

Downloaded From TV-Manual.com Manuals

Page is loading ...

Hyundai H-LED3202 User manual

Hyundai H-LED3202 User manual

in other languages

Related papers

Other documents