LG Electronics USA BEJ47VL10 User manual

Category
LED displays
Type
User manual
G
Order Number
: GETEC-C1-11-053
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-11-014
Page 1 / 1
EUT Type: LCD Monitor
FCC ID.: BEJ47VL10
APPENDIX G
: USERS MANUAL
www.lg.com
OWNER’S MANUAL
MONITOR SIGNAGE
47VL10
Please read this manual carefully before operating the
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
ENG
ENGLISH
2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLING AND PREPAR-
ING
3 Unpacking
4 Separate purchase
5 Parts and buttons
6 Connecting the stand
6 Connecting the Speakers
8 Connecting stand hole cover
8 To install Portrait
9 Installing on a wall
10 REMOTE CONTROL
11 USING THE MONITOR SET
11 Connecting to a PC
11 - HDMI connection
12 - DVI/HDMI connection
12 - RGB connection
13 CUSTOMIZING SETTINGS
13 Accessing main menus
14 - PICTURE settings
17 - AUDIO settings
18 - TIME settings
19 - OPTION settings
21 - INFORMATION settings
22 MAKING CONNECTIONS
23 Connecting to a HD receiver, DVD or
VCR player
23 - HDMI connection
23 - DVI - HDMI connection
24 - AV connection
24 Connecting to the LAN
24 - LAN connection
25 TROUBLESHOOTING
25 General
28 SPECIFICATIONS
3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
y Do not use any pirated items to ensure the safety and product life span.
y Any damages or injuries by using pirated items are not covered by the warranty.
y The accessories supplied with your product may vary depending on the model.
y Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
Remote control and Batteries Power Cord
CD (Owner's Manual) /
Card
D-Sub Signal Cable
CAUTION
NOTE
ScrewsStand hole cover
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Separate purchase
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
y Cable holder/Cable tie may not be available in some areas or for some models.
Stand kit Speaker kit
Stand Screws
cable management Cable holder/
Cable Tie
Screws/Cable
Speaker
NOTE
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
y You can set the Power indicator to on or off by selecting OPTION in the main menus.
Parts and buttons
Screen Marks Description
INPUT Changes the input source.
MENU Accesses the main menus, or saves your input and exits the menus.
 Adjust the up and down.
 Adjusts the volume level.
AUTO/SET Auto in progress for optimal display change change resolution.
/ ITurns the power on or off.
IR Receiver This is where the unit receives signals from the remote control.
Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display
is in sleep (Energy Saving) mode, this indicator color changes to amber.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Connection panel ( See p.23 to p.24 )
Screen Buttons
NOTE
Screen Marks
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
y You can set the Power indicator to on or off
by selecting OPTION in the main menus.
Connecting the stand
- Only on some models.
1 Take the parts for the stand out of the box and
assemble them as shown in the picture.
Connecting the Speakers
- Only on some models.
1 Mount the product onto the speaker by using
a screw as shown in the following connect the
speaker cable.
2 Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
2 After installing your speakers, use holders and
cable ties to organize the speaker cables. (This
feature is not available in all model.)
3 Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
Stand Screws
cable management
NOTE
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
y Do not use the cable management as a
handle for the Monitor.
y The illustrations in this manual may differ
from actual cable interfaces.
Cable Management
- Only on some models.
1 Arrange the cables in the center as shown in
the following picture.
2 Fit the cable guide to the back to help manage
the cables.
3 Hold the Cable management with both hands
and pull it downward.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the Monitor set and a table.
y The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE
NOTE
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
To install Portrait
- Only on some models.
When installing Portrait, rotate it clockwise based
on its front.
y When using the wall mounting bracket or
the portrait scene mode, the opening can be
covered by the stand hole cover.
Connecting stand hole cover
1 Take the parts for the stand out of the box and
assemble them as shown in the picture.
2 Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand hole cover as shown in the
following picture.
3 Use the screws to secure the stand hole cover
on the rear side of the product as shown in the
diagram.
ScrewsStand hole cover
NOTE
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
y Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
y If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
y Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
y Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation
manual and necessary parts.
y The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
y The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
y For more information, refer to the
instructions supplied with the wall mount.
CAUTION
If you want to mount the monitor on the wall (op-
tional), attach the wall mounting bracket to the rear
of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
Use the wall mount plate and screws that comply
with the VESA standard as specified below.
y 784.8 mm (30.9 inch) or less
* Thickness of the wall mount plate: 2.6 mm
* Fastening screw: Diameter 4.0 mm x Pitch 0.7
mm x
Length 10 mm
y 787.4 mm (31.0 inch) or greater
* Use the wall mount plate and screws con-
forming to the VESA standard.
Installing on a wall
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
NOTE
10
ENG
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
1. Open the battery compartment cover on the
back side and install the batteries matching
correct polarity (+ with +,- with -)
2. Install two 1.5 V AAA batteries. Don’t mix old or
used batteries with new ones.
3. Close cover.
4. To remove the batteries, perform the installation
actions in reverse.
CAUTION
y Do not mix old and new batteries, as this
may damage the remote control.
y Make sure to point the remote control to the
remote control sensor on the Monitor set.
(POWER)
Turns the Monitor set on or off.
AV Button
Toggles through video.
AV -> RGB PC -> HDMI/DVI
UP and Down buttons
Bring up and down direction
adjustment.
Sleep Button
When watching AV, RGB
PC,HDMI/DVI.The product will
be automatically turned off after
a certain period of time.
Press this button repetitively
to select an appropriate time
duration.
PSM Button
Toggles through preset video
settings.
INPUT
Selects the input mode.
ARC button
Aspect Ratio Correction.
Toggles through aspect ratio
options.
Auto Button
Automatic adjustment function
(Operational for the analog
signal only)
There is not a function
which is supported
Mute button
Menu Button

Volume up and down.
Exit Button
Check Button
There is not a function
which is supported.
AAA Type
11
ENG
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports the Plug & Play* feature
and has the built-in speakers with Surround X that
reproduces sound clearly with a rich bass.
* Plug & Play: The function when a PC recognizes
a connected device that users connect to a PC
and turn on, without device configuration or user
intervention.
y It is recommended to use the Monitor set
with the HDMI connection for the best image
quality.
y If you want to use an optional external
speaker instead of the built-in speaker, set
the Monitor set speaker feature to off.
y Use a High Speed HDMI™ Cable.
y Please check the PC environment if you
cannot hear the sound in HDMI mode.
y If you want to use HDMI-PC mode, you must
set the input label to PC mode.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations. You should set PC as
an input label to connect the PC to the Monitor set
with an HDMI connection.
y Use the standard
Macintosh adapter
since an incompatible
adapter is available in
the market. (Different
signaling system)
PC/MAC
Back of the product.
Macintosh Adapter
(not included)
NOTE
NOTE
NOTE
12
ENG
ENGLISH
USING THE MONITOR SET
y Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
y If you want to use HDMI-PC mode, you must
set the input label to PC mode.
y Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y If you turn the Monitor set on when the set
becomes cold, the screen may flicker. This
is normal.
y Some red, green, or blue spots may appear
on the screen. This is normal.
DVI/HDMI connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI/HDMI cable as shown the
following illustrations.
RGB connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
y Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Back of the product.
(not included)
(not included)
Back of the product.
PC PC
NOTE NOTE
CAUTION
CAUTION
13
ENG
ENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing main menus
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to one of the following
menus and press SET.
3 Press the Navigation buttons to scroll to the setting or option
you want and press SET.
4 When you are finished, press EXIT.
When you return to the previous menu, press EXIT.
OPTIONPICTURE INFORMATIONAUDIO TIME
TIME ( See p.18 )
Sets the time, date or Timer
feature
OPTION ( See p.19 )
Customizes the general settings
AUDIO ( See p.17 )
Adjusts the sound quality,
effect, or volume level
PICTURE ( See p.14 )
Adjusts the image size,
quality, or effect
INFORMATION ( See p.21 )
Adjust Set ID and check
Serial No. and SW version.
14
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Picture Mode Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Colour, and sharpness.
Standard Adjusts the image for the normal environment.
Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport Optimizes the video image for high and dynamic actions by emphasizing primary
Colours such as white, grass, or sky blue.
Game Optimizes the video image for a fast gaming screen such as PCs or games.
User 1/2 Adjusts the detailed video image settings for video experts as well as general
viewers.
Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you
decrease the brightness level, the screen becomes darker and the power
consumption will be reduced without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast
when the bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture. You may use Brightness when
the dark part of the picture is saturated.
Color Adjusts intensity of all Colors.
Sharpness Adjusts the level of clearness in the edges between the light and dark areas of the
picture. The lower the level, the softer the image.
Tint Adjusts the balance between red and green levels.
Expert To compensate for each image mode, or adjust image values according to a
particular image. (Applied only to User2 menu.) (Function works in the following
mode - AV, HDMI-DTV)
y If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,
Sport or Game the subsequent menus will be automatically set.
y You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.
y When the User 1/2 is selected, you can select Backlight, Contrast, Brightness,
Color, Sharpness, Tint or Expert.
PICTURE settings
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to PICTURE and
press SET.
3 Press the Navigation buttons to scroll to the setting or
option you want and press SET.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
EXIT.
The available picture settings are described in the following:
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
MENU
NOTE
15
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Color
Temperature
Color Settings
Option
Cool Slightly purplish white.
Medium Slightly bluish white.
Warm Slightly reddish white.
User Select this option to use the user-defined settings.
Advanced Gamma
(Low/Medium/
High)
You can adjust brightness of dark area and middle gray level area of the picture.
» Low: Make dark and middle gray level area of the picture brighter.
» Medium: Express original picture levels.
» High: Make dark and middle gray level area of the picture darker.
Film Mode
(On/Off)
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
Black Level
(Low/High)
» Low: The picture of the screen gets darker.
» High: The picture of the screen gets brighter.
» Auto: Realizing the black level of the screen and set it to High or Low
automatically.
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M),
HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
NR
(Off/Low/High/
Adaptive)
Reduces screen noise without compromising video quality.
Aspect Ratio Changes the image size to view images at its optimal size. ( See p.16 )
Picture Reset Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default factory settings.
SCREEN
(In RGB, HDMI-
DTV)
Customizes the PC display options in RGB mode.
Option
Auto Config.
(RGB PC input
only)
This button is for the automatic adjustment of the screen position, clock and
phase. This function is available for analog signals only.
* Phase, Clock function are not available in HDMI/DVI DTV.
Manual Config. If the picture isn't clear after auto adjustment and characters are still trembling,
adjust the picture phase manually.
* Phase, Clock function are not available in HDMI/DVI DTV.
Phase : To adjust the focus of the display. This item allows you to remove any
horizontal noise and clear or sharpen the image of characters. This
function is available for analog signals only.
Clock : To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change. This function is available for
analog signals only.
H-Position : Moving the screen position horizontally.
V-Position : Moving the screen position vertically.
H-Size : Adjust the horizontal size of the screen.
V-Size : Adjust the vertical size of the screen.
XGA Mode
(RGB-PC only)
For more improved or better picture quality, select the same mode corresponding
to computer resolution.
Reset Return Manual config. and XGA Mode to the default factory settings.
16
ENG
ENGLISH
WATCHING TV
- 4:3: The following selection will allow you to view
a picture with an original 4:3 aspect ratio, gray
bars will appear on both the left and right of the
screen.
- 1:1: The aspect ratio is not adjusted from the
original.
- 14:9: You can view a picture format of 14:9 or
a general Monitor set programme in the 14:9
mode. The 14:9 screen is viewed in the same
way as in 4:3, but is magnified to the left and
right.
- Zoom 1,2 : The following selection will allow you
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
Advanced image options
Resize the image to view the image at its optimal
size by pressing RATIO while you are watching
Monitor set.
y If a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
y If the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on
the letterboxed area of the screen.
You can also change the image size by
accessing the ARC button of remote control or
the main menus.
- 16:9: The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- Just Scan: Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image.
Note: If there is noise in original Picture, You
can see the noise at the edge.
- Original: When your Monitor set receives a wide
screen signal it will automatically change to the
picture format broadcast.
y You can only select 4:3, 16:9 (Wide), 14:9,
Zoom in Component mode.
y You can only select 4:3, Original, 16:9
(Wide), 14:9, Zoom in HDMI mode.
y You can only select 4:3, 16:9 (Wide) in
RGB-PC, HDMI-PC mode only.
y In DTV/HDMI/Component (over 720p) mode,
Just Scan is available.
y You can only select 1:1 in HDMI/ DVI PC,
RGB PC mode only.
NOTE
NOTE
CAUTION
17
ENG
ENGLISH
CUSTOMIZING SETTINGS
AUDIO settings
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to AUDIO and press
SET.
3 Press the Navigation buttons to scroll to the setting or
option you want and press SET.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
EXIT.
The available audio options are described in the following:
Setting Description
Sound Mode Selects one of the preset sound modes or customize each option in each mode.
Mode
Clear Voice By differentiating the human sound range from others,it helps
users listen to human voices better.
Standard Select when you want standard-quality sound.
Music Select when you listen to music.
Cinema Select when you watch movies.
Sport Select when you watch sports events.
Game Select when you play games.
User Select this option to use the user-defined audio settings.
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Auto Volume Activates the Auto Volume feature to keep the volume level consistent whenever you change
programmes. The volume level may not be consistent due to different signal conditions of
broadcasting stations.
Balance Adjusts balance between the left and right speakers according to your room environment.
Speaker Turns on the internal speaker of the Monitor set when using an external Hi-Fi system. You can use
the speaker as an audio output device even if there is no video input.
AUDIO
Sound Mode
Auto Volume
Balance
Speaker
MENU
NOTE
18
ENG
ENGLISH
CUSTOMIZING SETTINGS
TIME settings
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to TIME and press
SET.
3 Press the Navigation buttons to scroll to the setting or option
you want and press SET.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press EXIT.
The available time settings are described in the following:
Setting Description
Sleep Timer Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Auto Sleep If Auto Sleep is active and there is no input signal, the set switches to off mode automatically after
10 minutes.
Power On Delay When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Power Saving This screen brightness adjusting menu helps you save energy.
Level: Total 4 screen brightness levels are provided.
- Off: 100% light
- Level 1: 80% light
- Level 2: 60 % light
- Level 3: 40% light
TIME
Sleep Timer
Auto Sleep
Power On Delay
Power Saving
MENU
19
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Language To choose the language in which the control names are displayed.
Key Lock Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a
ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for a long period of time.
Mode
Normal Leave on normal if you don't foresee image burn in being a problem.
White wash White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
Orbiter May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
Dot Wash This function moves the black dots of the screen. The black dots is
automatically moved every 5 second.
Power Indicator Use this function to set the power indicator on the front side of the product to On or Off.
DPM Select A user can choose to turn the power saving mode on / off.
OPTION settings
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to OPTION and press
SET.
3 Press the Navigation buttons to scroll to the setting or
option you want and press SET.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
EXIT.
The available option settings are described in the following:
OPTION
Language
Key Lock
ISM Method
Power Indicator
DPM Select
Tile Mode
Network Setup
Factory Reset
MENU
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

LG Electronics USA BEJ47VL10 User manual

Category
LED displays
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI