LG Electronics USA BEJ47VL10 User manual

Brand: LG Electronics USA

Model: BEJ47VL10

Category: LED displays

Type: User manual

Order Number

: GETEC-C1-11-053

FCC Part 15 subpart B

Test Report Number

: GETEC-E3-11-014

Page 1 / 1

EUT Type: LCD Monitor

FCC ID.: BEJ47VL10

APPENDIX G

: USER’S MANUAL

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

47VL10

Please read this manual carefully before operating the

your set and retain it for future reference.

MONITOR SIGNAGE MODELS

ENG

ENGLISH

ENG

ENGLISH

TABLE OF CONTENTS

CONTENTS

3 ASSEMBLING AND PREPAR-

ING

3 Unpacking

4 Separate purchase

5 Parts and buttons

6 Connecting the stand

6 Connecting the Speakers

8 Connecting stand hole cover

8 To install Portrait

9 Installing on a wall

10 REMOTE CONTROL

11 USING THE MONITOR SET

11 Connecting to a PC

11 - HDMI connection

12 - DVI/HDMI connection

12 - RGB connection

13 CUSTOMIZING SETTINGS

13 Accessing main menus

14 - PICTURE settings

17 - AUDIO settings

18 - TIME settings

19 - OPTION settings

21 - INFORMATION settings

22 MAKING CONNECTIONS

23 Connecting to a HD receiver, DVD or

VCR player

23 - HDMI connection

23 - DVI - HDMI connection

24 - AV connection

24 Connecting to the LAN

24 - LAN connection

25 TROUBLESHOOTING

25 General

28 SPECIFICATIONS

ENG

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

y Do not use any pirated items to ensure the safety and product life span.

y Any damages or injuries by using pirated items are not covered by the warranty.

y The accessories supplied with your product may vary depending on the model.

y Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

Remote control and Batteries Power Cord

CD (Owner's Manual) /

Card

D-Sub Signal Cable

CAUTION

NOTE

ScrewsStand hole cover

ENG

ENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Without prior notice, optional accessories are subject to change to improve the performance of the product,

and new accessories may be added. The illustrations in this manual may differ from the actual product and

accessories.

y Cable holder/Cable tie may not be available in some areas or for some models.

Stand kit Speaker kit

Stand Screws

cable management Cable holder/

Cable Tie

Screws/Cable

Speaker

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y You can set the Power indicator to on or off by selecting OPTION in the main menus.

Parts and buttons

Screen Marks Description

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

 Adjust the up and down.

 Adjusts the volume level.

AUTO/SET Auto in progress for optimal display change change resolution.

/ ITurns the power on or off.

IR Receiver This is where the unit receives signals from the remote control.

Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display

is in sleep (Energy Saving) mode, this indicator color changes to amber.

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

Connection panel ( See p.23 to p.24 )

Screen Buttons

NOTE

Screen Marks

ENG

ENGLISH

ASSEMBLING AND PREPARING

y You can set the Power indicator to on or off

by selecting OPTION in the main menus.

Connecting the stand

- Only on some models.

1 Take the parts for the stand out of the box and

assemble them as shown in the picture.

Connecting the Speakers

- Only on some models.

1 Mount the product onto the speaker by using

a screw as shown in the following connect the

speaker cable.

2 Place a soft cloth on the table and put the

product with the screen facing downward.

Connect the stand as shown in the following

picture.

2 After installing your speakers, use holders and

cable ties to organize the speaker cables. (This

feature is not available in all model.)

3 Use the screws to secure the stand on the rear

side of the product as shown in the diagram.

Stand Screws

cable management

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y Do not use the cable management as a

handle for the Monitor.

y The illustrations in this manual may differ

from actual cable interfaces.

Cable Management

- Only on some models.

1 Arrange the cables in the center as shown in

the following picture.

2 Fit the cable guide to the back to help manage

the cables.

3 Hold the Cable management with both hands

and pull it downward.

Using the Kensington security system

The Kensington security system connector is

located at the back of the Monitor set. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com

Connect the Kensington security system cable

between the Monitor set and a table.

y The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

To install Portrait

- Only on some models.

When installing Portrait, rotate it clockwise based

on its front.

y When using the wall mounting bracket or

the portrait scene mode, the opening can be

covered by the stand hole cover.

Connecting stand hole cover

1 Take the parts for the stand out of the box and

assemble them as shown in the picture.

2 Place a soft cloth on the table and put the

product with the screen facing downward.

Connect the stand hole cover as shown in the

following picture.

3 Use the screws to secure the stand hole cover

on the rear side of the product as shown in the

diagram.

ScrewsStand hole cover

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y Disconnect the power cord first, and then

move or install the Monitor set. Otherwise

electric shock may occur.

y If you install the Monitor set on a ceiling or

slanted wall, it may fall and result in severe

injury. Use an authorized LG wall mount

and contact the local dealer or qualified

personnel.

y Do not over tighten the screws as this may

cause damage to the Monitor set and void

your warranty.

y Use the screws and wall mounts that

meet the VESA standard. Any damages

or injuries by misuse or using an improper

accessory are not covered by the warranty.

y Use the screws that are listed on the VESA

standard screw specifications.

y The wall mount kit includes an installation

manual and necessary parts.

y The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

y The length of screws may differ depending

on the wall mount. Be sure to use the proper

length.

y For more information, refer to the

instructions supplied with the wall mount.

CAUTION

If you want to mount the monitor on the wall (op-

tional), attach the wall mounting bracket to the rear

of the monitor.

Make sure that the wall mounting bracket is se-

curely fixed to the monitor and to the wall.

Use the wall mount plate and screws that comply

with the VESA standard as specified below.

y 784.8 mm (30.9 inch) or less

* Thickness of the wall mount plate: 2.6 mm

* Fastening screw: Diameter 4.0 mm x Pitch 0.7

mm x

Length 10 mm

y 787.4 mm (31.0 inch) or greater

* Use the wall mount plate and screws con-

forming to the VESA standard.

Installing on a wall

Install the monitor at least 10 cm away from the

wall and leave about 10 cm of space at each side

of the monitor to ensure sufficient ventilation. De-

tailed installation instructions can be obtained from

your local retail store. Please refer to the manual

to install and set up a tilting wall mounting bracket.

10 cm

NOTE

ENG

ENGLISH

REMOTE CONTROL

1. Open the battery compartment cover on the

back side and install the batteries matching

correct polarity (+ with +,- with -)

2. Install two 1.5 V AAA batteries. Don’t mix old or

used batteries with new ones.

3. Close cover.

4. To remove the batteries, perform the installation

actions in reverse.

CAUTION

y Do not mix old and new batteries, as this

may damage the remote control.

y Make sure to point the remote control to the

remote control sensor on the Monitor set.

(POWER)

Turns the Monitor set on or off.

AV Button

Toggles through video.

AV -> RGB PC -> HDMI/DVI

UP and Down buttons

Bring up and down direction

adjustment.

Sleep Button

When watching AV, RGB

PC,HDMI/DVI.The product will

be automatically turned off after

a certain period of time.

Press this button repetitively

to select an appropriate time

duration.

PSM Button

Toggles through preset video

settings.

INPUT

Selects the input mode.

ARC button

Aspect Ratio Correction.

Toggles through aspect ratio

options.

Auto Button

Automatic adjustment function

(Operational for the analog

signal only)

There is not a function

which is supported

Mute button

Menu Button



Volume up and down.

Exit Button

Check Button

There is not a function

which is supported.

AAA Type

ENG

ENGLISH

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play* feature

and has the built-in speakers with Surround X that

reproduces sound clearly with a rich bass.

* Plug & Play: The function when a PC recognizes

a connected device that users connect to a PC

and turn on, without device configuration or user

intervention.

y It is recommended to use the Monitor set

with the HDMI connection for the best image

quality.

y If you want to use an optional external

speaker instead of the built-in speaker, set

the Monitor set speaker feature to off.

y Use a High Speed HDMI™ Cable.

y Please check the PC environment if you

cannot hear the sound in HDMI mode.

y If you want to use HDMI-PC mode, you must

set the input label to PC mode.

HDMI connection

Transmits the digital video and audio signals from

your PC to the Monitor set. Connect the PC and

the Monitor set with the HDMI cable as shown in

the following illustrations. You should set PC as

an input label to connect the PC to the Monitor set

with an HDMI connection.

y Use the standard

Macintosh adapter

since an incompatible

adapter is available in

the market. (Different

signaling system)

PC/MAC

Back of the product.

Macintosh Adapter

(not included)

NOTE

ENG

ENGLISH

USING THE MONITOR SET

y Use a shielded signal interface cable, such

as D-sub 15 pin signal cable and DVI/HDMI

cable, with a ferrite core to maintain standard

compliance for the product.

y If you want to use HDMI-PC mode, you must

set the input label to PC mode.

y Connect the signal

input cable and tighten

it by turning the screws

clockwise.

y If you turn the Monitor set on when the set

becomes cold, the screen may flicker. This

is normal.

y Some red, green, or blue spots may appear

on the screen. This is normal.

DVI/HDMI connection

Transmits the digital video signal from your PC to

the Monitor set. Connect the PC and the Monitor

set with the DVI/HDMI cable as shown the

following illustrations.

RGB connection

Transmits the analog video signal from your PC to

the Monitor set. Connect the PC and the Monitor

set with the D-sub 15 pin cable as shown the

following illustrations.

y Do not press the screen with your finger for

a long time as this may result in temporary

distortion on the screen.

y Avoid displaying a fixed image on the

screen for a long period of time to prevent

image burn. Use a screensaver if possible.

Back of the product.

(not included)

Back of the product.

PC PC

NOTE NOTE

CAUTION

ENG

ENGLISH

CUSTOMIZING SETTINGS

Accessing main menus

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to one of the following

menus and press SET.

3 Press the Navigation buttons to scroll to the setting or option

you want and press SET.

4 When you are finished, press EXIT.

When you return to the previous menu, press EXIT.

OPTIONPICTURE INFORMATIONAUDIO TIME

TIME ( See p.18 )

Sets the time, date or Timer

feature

OPTION ( See p.19 )

Customizes the general settings

AUDIO ( See p.17 )

Adjusts the sound quality,

effect, or volume level

PICTURE ( See p.14 )

Adjusts the image size,

quality, or effect

INFORMATION ( See p.21 )

Adjust Set ID and check

Serial No. and SW version.

ENG

ENGLISH

CUSTOMIZING SETTINGS

Setting Description

Picture Mode Selects one of the preset image or customizes options in each mode for the best Monitor set screen

performance. You are also able to customize advanced options of each mode.

The available preset picture modes vary depending on the Monitor set .

Mode

Vivid Adjusts the video image for the retail environment by enhancing the contrast,

brightness, Colour, and sharpness.

Standard Adjusts the image for the normal environment.

Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a

movie theater.

Sport Optimizes the video image for high and dynamic actions by emphasizing primary

Colours such as white, grass, or sky blue.

Game Optimizes the video image for a fast gaming screen such as PCs or games.

User 1/2 Adjusts the detailed video image settings for video experts as well as general

viewers.

Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you

decrease the brightness level, the screen becomes darker and the power

consumption will be reduced without any video signal loss.

Contrast Increases or decreases the gradient of the video signal. You may use Contrast

when the bright part of the picture is saturated.

Brightness Adjusts the base level of the signal in the picture. You may use Brightness when

the dark part of the picture is saturated.

Color Adjusts intensity of all Colors.

Sharpness Adjusts the level of clearness in the edges between the light and dark areas of the

picture. The lower the level, the softer the image.

Tint Adjusts the balance between red and green levels.

Expert To compensate for each image mode, or adjust image values according to a

particular image. (Applied only to User2 menu.) (Function works in the following

mode - AV, HDMI-DTV)

y If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,

Sport or Game the subsequent menus will be automatically set.

y You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.

y When the User 1/2 is selected, you can select Backlight, Contrast, Brightness,

Color, Sharpness, Tint or Expert.

PICTURE settings

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to PICTURE and

press SET.

3 Press the Navigation buttons to scroll to the setting or

option you want and press SET.

- To return to the previous level, press BACK.

4 When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

The available picture settings are described in the following:

Picture Mode

Color Temperature

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

NOTE

ENG

ENGLISH

CUSTOMIZING SETTINGS

Setting Description

Color

Temperature

Color Settings

Option

Cool Slightly purplish white.

Medium Slightly bluish white.

Warm Slightly reddish white.

User Select this option to use the user-defined settings.

Advanced Gamma

(Low/Medium/

High)

You can adjust brightness of dark area and middle gray level area of the picture.

» Low: Make dark and middle gray level area of the picture brighter.

» Medium: Express original picture levels.

» High: Make dark and middle gray level area of the picture darker.

Film Mode

(On/Off)

You can watch a cinema-like video by eliminating judder effect.

Use this function when you watch movies.

Black Level

(Low/High)

» Low: The picture of the screen gets darker.

» High: The picture of the screen gets brighter.

» Auto: Realizing the black level of the screen and set it to High or Low

automatically.

Set black level of the screen to proper level.

This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M),

HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.

(Off/Low/High/

Adaptive)

Reduces screen noise without compromising video quality.

Aspect Ratio Changes the image size to view images at its optimal size. ( See p.16 )

Picture Reset Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default factory settings.

SCREEN

(In RGB, HDMI-

DTV)

Customizes the PC display options in RGB mode.

Option

Auto Config.

(RGB PC input

only)

This button is for the automatic adjustment of the screen position, clock and

phase. This function is available for analog signals only.

* Phase, Clock function are not available in HDMI/DVI DTV.

Manual Config. If the picture isn't clear after auto adjustment and characters are still trembling,

adjust the picture phase manually.

* Phase, Clock function are not available in HDMI/DVI DTV.

Phase : To adjust the focus of the display. This item allows you to remove any

horizontal noise and clear or sharpen the image of characters. This

function is available for analog signals only.

Clock : To minimize any vertical bars or stripes visible on the screen background.

The horizontal screen size will also change. This function is available for

analog signals only.

H-Position : Moving the screen position horizontally.

V-Position : Moving the screen position vertically.

H-Size : Adjust the horizontal size of the screen.

V-Size : Adjust the vertical size of the screen.

XGA Mode

(RGB-PC only)

For more improved or better picture quality, select the same mode corresponding

to computer resolution.

Reset Return Manual config. and XGA Mode to the default factory settings.

ENG

ENGLISH

WATCHING TV

- 4:3: The following selection will allow you to view

a picture with an original 4:3 aspect ratio, gray

bars will appear on both the left and right of the

screen.

- 1:1: The aspect ratio is not adjusted from the

original.

- 14:9: You can view a picture format of 14:9 or

a general Monitor set programme in the 14:9

mode. The 14:9 screen is viewed in the same

way as in 4:3, but is magnified to the left and

right.

- Zoom 1,2 : The following selection will allow you

to view the picture without any alteration, while

filling the entire screen. However, the top and

bottom of the picture will be cropped.

Advanced image options

Resize the image to view the image at its optimal

size by pressing RATIO while you are watching

Monitor set.

y If a fixed image displays on the screen for a

long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is “image burn” or “burn-in” and

not covered by the warranty.

y If the aspect ratio is set to 4:3 for a long

period of time, image burn may occur on

the letterboxed area of the screen.

You can also change the image size by

accessing the ARC button of remote control or

the main menus.

- 16:9: The following selection will allow you

to adjust the picture horizontally, in linear

proportion, to fill the entire screen(useful for

viewing 4:3 formatted DVDs).

- Just Scan: Following Selection will lead to you

view the picture of best quality without loss of

original picture in high resolution image.

Note: If there is noise in original Picture, You

can see the noise at the edge.

- Original: When your Monitor set receives a wide

screen signal it will automatically change to the

picture format broadcast.

y You can only select 4:3, 16:9 (Wide), 14:9,

Zoom in Component mode.

y You can only select 4:3, Original, 16:9

(Wide), 14:9, Zoom in HDMI mode.

y You can only select 4:3, 16:9 (Wide) in

RGB-PC, HDMI-PC mode only.

y In DTV/HDMI/Component (over 720p) mode,

Just Scan is available.

y You can only select 1:1 in HDMI/ DVI PC,

RGB PC mode only.

NOTE

CAUTION

ENG

ENGLISH

CUSTOMIZING SETTINGS

AUDIO settings

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to AUDIO and press

SET.

3 Press the Navigation buttons to scroll to the setting or

option you want and press SET.

- To return to the previous level, press BACK.

4 When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

The available audio options are described in the following:

Setting Description

Sound Mode Selects one of the preset sound modes or customize each option in each mode.

Mode

Clear Voice By differentiating the human sound range from others,it helps

users listen to human voices better.

Standard Select when you want standard-quality sound.

Music Select when you listen to music.

Cinema Select when you watch movies.

Sport Select when you watch sports events.

Game Select when you play games.

User Select this option to use the user-defined audio settings.

If sound quality or volume is not at the level you want, it is recommended to use a separate

home theater system or amplifier to cope with different user environments.

Auto Volume Activates the Auto Volume feature to keep the volume level consistent whenever you change

programmes. The volume level may not be consistent due to different signal conditions of

broadcasting stations.

Balance Adjusts balance between the left and right speakers according to your room environment.

Speaker Turns on the internal speaker of the Monitor set when using an external Hi-Fi system. You can use

the speaker as an audio output device even if there is no video input.

AUDIO

Sound Mode

Auto Volume

Balance

Speaker

NOTE

ENG

ENGLISH

CUSTOMIZING SETTINGS

TIME settings

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to TIME and press

SET.

3 Press the Navigation buttons to scroll to the setting or option

you want and press SET.

- To return to the previous level, press BACK.

4 When you are finished, press EXIT.

When you return to the previous menu, press EXIT.

The available time settings are described in the following:

Setting Description

Sleep Timer Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn

it on again, the Sleep Timer will be set to off.

Auto Sleep If Auto Sleep is active and there is no input signal, the set switches to off mode automatically after

10 minutes.

Power On Delay When connecting multiple monitors and turning the power on, the monitors are turned on

individually to prevent overload.

Power Saving This screen brightness adjusting menu helps you save energy.

Level: Total 4 screen brightness levels are provided.

- Off: 100% light

- Level 1: 80% light

- Level 2: 60 % light

- Level 3: 40% light

TIME

Sleep Timer

Auto Sleep

Power On Delay

Power Saving

ENG

ENGLISH

CUSTOMIZING SETTINGS

Setting Description

Language To choose the language in which the control names are displayed.

Key Lock Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the

remote control. This feature can prevent unauthorized viewing.

In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.

In order to unlock it, do the following :

Push the MENU button on the remote control and set Key Lock to the 'Off' position.

ISM Method

A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a

ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the

screen for a long period of time.

Mode

Normal Leave on normal if you don't foresee image burn in being a problem.

White wash White wash fills the screen with solid white. This helps removes permanent

images burned into the screen. A permanent image may be impossible to clear

entirely with white wash.

Orbiter May help prevent ghost images. However, it is best not to allow any fixed

image to remain on the screen. To avoid a permanent image on the screen,

the screen will move every 2 minutes.

Inversion This function inverts the panel color of the screen. The panel color is

automatically inverted every 30 minutes.

Dot Wash This function moves the black dots of the screen. The black dots is

automatically moved every 5 second.

Power Indicator Use this function to set the power indicator on the front side of the product to On or Off.

DPM Select A user can choose to turn the power saving mode on / off.

OPTION settings

1 Press MENU to access the main menus.

2 Press the Navigation buttons to scroll to OPTION and press

SET.

3 Press the Navigation buttons to scroll to the setting or

option you want and press SET.

- To return to the previous level, press BACK.

4 When you are finished, press EXIT.

When you return to the previous menu, press

EXIT.

The available option settings are described in the following:

OPTION

Language

Key Lock

ISM Method

Power Indicator

DPM Select

Tile Mode

Network Setup

Factory Reset

Page is loading ...

LG Electronics USA BEJ47VL10 User manual

Brand: LG Electronics USA

Model: BEJ47VL10

Category: LED displays

Type: User manual

Download PDF

report