Netgear R6120 Owner's manual

Brand: Netgear

Model: R6120

Type: Owner's manual

Netgear R6120 is a powerful AC1200 WiFi router that delivers fast and reliable internet connections for your home network. With its four high-gain antennas, the R6120 provides wide coverage and strong signals throughout your house, ensuring smooth streaming, gaming, and web browsing experiences. It features a Gigabit Ethernet port for wired connections, allowing you to connect devices like gaming consoles, smart TVs, or NAS drives directly to the router for maximum speed and stability.

Quick Start

AC1200 WiFi Router

Model R6120 Unplug your modem, remove and replace the backup battery if it uses one, and

then plug the modem back in. Use the Ethernet cable to connect the modem to

the blue Internet port on the router.

Note: If your Internet connection does not require a modem, connect your main

Ethernet cable to the blue Internet port on the router.

Connect the router to a power source. The router’s Power LED lights green

when the router is ready.

Make sure that the router’s WiFi LED is lit. Look on the router label for the

preassigned WiFi network name (SSID) and network key (password).

Open the WiFi connection manager on your computer or other WiFi-enabled

device, find the router’s WiFi network name, and use the router’s password to

connect.

Launch a web browser. If the NETGEAR installation assistant does not display, visit

www.routerlogin.net. If a login window displays, enter admin for the user name

and password for the password. Follow the onscreen instructions.

The router’s Internet LED lights green when the router is connected to the

Internet.

For the best WiFi performance, position the antennas as shown.

Router

Power adapter

(varies by region)

Ethernet cable

2. Restart Your Modem and Plug In Your Router

3. Connect to the Internet

1. Position the Antennas

Package Contents

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only. January 2017

All Set Up!

Router

Modem

Computer

Power

adapter

Ethernet cable

Internet

Reset/WPS Button

The Reset/WPS button can be used to reboot and reset the router and connect

WPS-enabled devices to the router depending on how long the button is pressed:

• Reboot the router. Press the button for less than 5 seconds to reboot the router

• Connect WPS-enabled devices. Press the button for about 5 to 10 seconds

until the WiFi LED blinks amber.

• Reset the router to its factory default settings. Press the button for more

than 10 seconds until all the LEDs blink green.

Download the NETGEAR genie App

The free NETGEAR genie® app lets you easily monitor, connect, and control your home

network from a Windows or Mac computer, tablet, or smartphone. Download the

genie app from www.NETGEAR.com/genie.

Support

Thank you for purchasing this NETGEAR product. You can visit

www.netgear.com/support to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you use

only ocial NETGEAR support resources.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Netgear R6120 Owner's manual

Netgear R6120 Owner's manual

Netgear R6120 Owner's manual

Related papers

Other documents