Reese 74605, 74605† Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Reese 74605 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Cequent Consumer products
29000-2 Aurora Road
Solon, OH 44139
www.cequentconsumerproducts.com IN74605- A 121212
INSTRUCTIONS:
1. Insert corresponding Adapter end into 4-Pin Round Car Socket
2. Plug in 4-Flat end into corresponding Trailer end Connector
NOTE: This Adapter is designed make two connectors pictured above work together.
WARNING
All connections must be complete to function properly. Test and verify installation with a test light, circuit tester or trailer once installed.
WARNING
Overloading circuit can cause fires. DO NOT exceed lower of towing manufacturer rating or:
Max. Right Turn, Left Turn, Stop, & Tail Light Circuits: (7.5 amps)
Max. (+) Battery, Reverse, and Electric Brake Circuits: (30 amps)
Read vehicle's owner’s manual & instruction sheet for additional information. Additional fusing may be required.
Installation Instructions
lnstrucciones de instalación
Directives de montage
4-PIN ROUND TO 4-WAY FLAT
ADAPTER
P/N 74605
READ THIS FIRST:
Read and follow all instructions carefully before
beginning installation.
LISEZ CECI EN PREMIER:
Lire et suivre toutes les instructions
attenrivement avant le montage.
LEA ESTO PRIMERO:
Lea y siga todas las instrucciones cuidadosa-
mente antes de iniciar la instalación.
4-WAY FLAT TRAILER CONNECTOR
4-PIN ROUND CAR SOCKET
4 PIN TO 4 WAY FLAT ADAPTER
1/1