DoggyDaptive Water Bowl

instructables DoggyDaptive Water Bowl Operating instructions

  • Hello! I've reviewed the instructions for the DoggyDaptive water bowl, a system designed for automated refilling of a dog's water bowl. It has a hose connection, sensors to control water levels, and an alarm to notify when the dispenser needs refilling. I'm ready to answer your questions about it.
  • How does the DoggyDaptive water bowl work?
    What does the alarm on the water dispenser signify?
    What is the purpose of the design of this device?
instructables
DoggyDaptive Water Bowl
by PaceOccupationalTherapy
The DoggyDaptive water bowl is a hose connected water dispenser to a dog bowl. A sensor in the dog bowl allows for
the bowl to be lled and stop automatically when the water reaches a certain height. Within the water dispenser, a
sensor connected to an alarm allows for the dog's caretaker to be alerted when the water dispenser needs to be relled.
The design of this device allows for individuals with visual impairments to independently rell the water dispenser and
thus care for a guide dog while including automation aspects to support pet care and maintain safety.
Supplies:
(1) High/Low Water Level Sensor Detector Alarm 120 dB Red Strobe Siren
https://www.amazon.com/dp/B085Y4ZV1K?psc=1&ref=ppx...
(1) Extra Large Water Bowl for Dogs (1.25 Gallon) https://www.amazon.com/dp/B085Y4ZV1K?psc=1&ref=ppx...
(1) Short Garden Hose 3/4 in. x 5ft https://www.amazon.com/dp/B08T1HQ37Q?psc=1&ref=pp...
(1) Brass Garden Hose Fitting https://www.amazon.com/dp/B08T1HQ37Q?psc=1&ref=pp...
(1) Slimline Beverage Dispenser, 2.5-Gal https://www.amazon.com/dp/B08T1HQ37Q?psc=1&ref=pp...
(1) Water Float Valve with Adjustable Arm https://www.amazon.com/dp/B08T1HQ37Q?psc=1&ref=pp...
(1) 1/2" Hose Bibb https://www.amazon.com/dp/B08T1HQ37Q?psc=1&ref=pp...
DoggyDaptive Water Bowl: Page 1
DoggyDaptive Water Bowl: Page 2
DoggyDaptive Water Bowl: Page 3
DoggyDaptive Water Bowl: Page 4
DoggyDaptive Water Bowl: Page 5
DoggyDaptive Water Bowl: Page 6
Step 1:
First, remove the waterspout of the beverage dispenser and connect the hose bibb to the dispenser.
DoggyDaptive Water Bowl: Page 7
DoggyDaptive Water Bowl: Page 8
Step 2:
Step 3:
In the second step, drill a hole through the water bowl and t the water oat valve through the hole, with the ball facing
inside the bowl.
Next, connect the hose to the water oat valve, and tighten to seal the hole.
DoggyDaptive Water Bowl: Page 9
Step 4:
After, connect the other end of the hose to the hose bibb that is attached to the water dispenser.
DoggyDaptive Water Bowl: Page 10
Step 5:
Attach the water level sensor to the back of the beverage container with command strips. Install the water level sensor
by hanging it vertically inside the beverage dispenser.
DoggyDaptive Water Bowl: Page 11
DoggyDaptive Water Bowl: Page 12
DoggyDaptive Water Bowl: Page 13
DoggyDaptive Water Bowl: Page 14
Step 6:
Fill the water dispenser with water. When the alarm sounds, it is signifying a low water level in the dispenser. Rell the
water dispenser through the hole on the top of the dispenser.
DoggyDaptive Water Bowl: Page 15
DoggyDaptive Water Bowl: Page 16
DoggyDaptive Water Bowl: Page 17
DoggyDaptive Water Bowl: Page 18
/