Masimo LNCS Neo Sensor Application: Hand User guide

Brand: Masimo

Model: LNCS Neo Sensor Application: Hand

Type: User guide

Pulse Oximetry Sensor

Application For VEP Clients

LNCS Neo Sensor Application: Hand

The emitter and detector must be aligned directly across from

each other.

Apply to Outer Aspect of Hand Only: Pinky Finger Side

LNCS Neo Sensor Application: Foot

The emitter and detector must be aligned across from each other.

Apply to Outer Aspect of Foot Only: Pinky Toe Side

Pinky Toe

Pinky Toe

LNCS Infant Sensor: Finger Application

The emitter and detector must be aligned directly across from each other.

LNCS Infant Sensor: Toe Application

The emitter should be placed on the nail and the detector must

be placed on the fleshy pad of the toe.

When do I use the

Neo Sensor?

The Neo sensor is for use on the hand or foot

of very small babies. The recommended

weight is less than 3 kg.

The Neo sensor is also for use on the finger

or toe of large children greater than 40 kg.

ALWAYS ensure you check for good sensor

alignment as your child grows. When the

emitter and detector no longer align when

wrapped on the hand or foot you will need

to switch to an Infant sensor on the finger or

toe.

When do I use the

Infant Sensor?

The Infant sensor is for use on the fingers

and toes of infants and children.

The recommended range is for infants

greater than 3 to 20 kg in weight.

Use this sensor when the Neo sensor no

longer aligns properly on your childs’ hand or

foot.

Masimo LNCS Y-I Sensor

Masimo LNCS Y-I Sensor Foot Application Steps

Masimo LNCS Y-I Sensor Foot Application

Masimo LNCS Y-I Sensor Hand Application Steps

Masimo LNCS Y-I Sensor Hand Application

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Masimo LNCS Neo Sensor Application: Hand User guide

Brand: Masimo

Model: LNCS Neo Sensor Application: Hand

Type: User guide