User Manual
Intended for commercial use. Unit must be
kept clear of combustibles at all times.
For any service-related Issues, please contact us:
Phone Number: 718-576-6342
Email address: [email protected]
ICE MAKER
25 IN. STAINLESS-STEEL COMMERCIAL
ICE MAKER WITH FULL CUBE PRODUCTION
MODEL:
KM-CIM-400
2
CONTENTS
IMPORTANT SAFETY------------------------------------------------------------------------------------3
SPECIFICATION-------------------------------------------------------------------------------------------5
DIMENSION/CONNECTION--------------------------------------------------------------------5
RATING-----------------------------------------------------------------------------------------------5
INTRODUCTION-----------------------------------------------------------------------------------------6
MAIN MACHINE ASSEMBLY -----------------------------------------------------------------------6
ABOUT THE MACHINE --------------------------------------------------------------------------6
HOST
OPERATION PANEL
---------------------------------------
------------------------------------------------------------------------------
-----------------------------------------------------------7
7
OPERATING PROCEDURE AND MAINTENANCE----------------------------------------------9
UNPACKING YOUR ICE MAKER---------------------------------------------------------------9
INSTALLATION LOCATION REQUIREMENT-----------------------------------------------10
ELECTRICAL REQUIREMENT & CONNECTIONS---------------------------------------10
C
CL
LE
EA
AN
NI
IN
NG
GY
YO
OU
UR
RI
IC
CE
EM
MA
AK
KE
ER
RB
BE
EF
FR
RO
OE
EF
FI
IR
RS
ST
TU
US
SI
IN
NG
G-------------------------------11
WATER CONNECTIONS FOR YOUR ICE-MAKER-----------------------------------------11
OPERATION YOUR UNIT--------------------------------------------------------------------------------13
OPERATION THE ICE MAKING PROCESS-------------------------------------------------13
AUTOMATIC SELF-CLEANING PROGRAM-------------------------------------------------14
WIRING DIAGRAM----------------------------------------------------------------------------------15
NORMAL SOUNDS----------------------------------------------------------------------------------15
PREPARING ICE MAKER FOR LONG STORAGE-----------------------------------------16
CLEAND AND MAINENANCE--------------------------------------------------------------------16
EXTERIOR CLEANING-----------------------------------------------------------------------------17
INTERIOR CLEANING------------------------------------------------------------------------------17
ICE MAKING PARTS CLEANING----------------------------------------------------------------17
ICE MAKING ASSEMBLY SYSTEM CLEANING BY USING NU-CALGON NICKLE SAFE
ICE-MACHINE CLEANER------------------------------------------------------------------------------------19
CLEANING SUGGESTION-------------------------------------------------------------------------20
NORMAL TROUBLE SHOOTING-----------------------------------------------------------------21
CORRECT DI
LIMITED SERVICE WARRANTY
SPOSAL OF THIS PRODUCT-------------------
----------------------------------------------------------------
--------------------------------22
23
2
3
4
5
KM-CIM-400
9.7
220
3.88O
190
6
7
Accessor
:
y:
3 meters long and white color water drain pipe
water quick connector of the water faucet,
¢9.52mm diameter and white color water supply pipe(5 meters long
Adjustable feet.
8
9
10
11
12
13
When the machine works for the first time or the machine is shut down for more than 24 hours, it will
enter the automatic cleaning program after starting up, or after ice making for more than 20 times, it will
enter the automatic cleaning program
14
Turn on the ice machine: plug the power the symbol of power will flash, press“ON”/”OFF”, the
out tube can input the water from water tank through magnetic valve.The machine will start
self-clean after the water is enough.The symbol will revolve on the LCD. time count down area
dispaly 90M.
Cancel the self-cleaning program: It takes about 90 minutes to complete one self-cleaning
program. When the program is over, the system will be in off-state automatically. And also you can
press the “ON/OFF” button on control panel to cancel the self-cleaning program by force.
15
16
17
18
19
Turn on
the
power
to
the
ice
maker,
then
press
"TIMER
CLEAN"
button
on
control
panel
for
more than
5
seconds,to
enter
the
self-Cleaning
program.
The
machine
will
startself-clean
after
the
water is
enough,
The
symbol
will
revolve
on
The
LCD
,
display
The
"90"
countdown
time.Stop
working
after
90
minutes.
Press“TIMER
CLEAN”,
it
will
be
cancelled
if
during
the
cleaning.
20
Turn on the power to the ice maker, then press "TIMER CLEAN" button on control
panel for more than 5 seconds,to enter the self-Cleaning program. The machine will
startself-clean after the water is enough, The symbol will revolve on The LCD ,
display The "90" countdown time.Stop working after 90 minutes.
Press“TIMER CLEAN”, it will be cancelled if during the cleaning.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/