HushTone by Cyclone ESCB150SM Operating instructions

Hello! I've reviewed the user manual for the Cyclone Hushtone ENERGY STAR Bath Fan with Motion Sensor & Nightlight. This manual details the installation process, parts included, and wiring instructions for the bath fan, motion sensor, and nightlight. I'm ready to answer any questions you might have about its installation or features.
How many switches are needed for ideal set up?

What type of power source is needed for the motion sensor?

What is included in the box?

*Electrical Drill *Wire Stripper & Cutter

1/2" Drill Bit for Drilling Pilot Holes into joist

*Aluminum Foil Tape & or Duct Tape

*1-1/4" Drill Bit for Drilling Electrical Wiring *Electrical Supplies for Wiring

Access Hole Through Joists (If Applicable) i.e Marrettes (wirenuts), Electrical Tape

*#2 Phillips Screwdriver or Driver Bit & Cable Connectors

1x Plain Grille

1x Fan (Includes 2x Grille Springs)

1x Grille with Motion Sensor & Nightlight

(Includes 2x Grille Springs)

4x Mounting Brackets 4x Flange Screws

Hushtone by Cyclone

Bath Fan Parts Supplied

Bath Fan Installation- Tools & Materials Required

ENERGY STAR BATH FAN WITH MOTION SENSOR & NIGHTLIGHT

1x Black

1x White

1x Green

MOTION SENSOR & NIGHTLIGHT 1x Brown

MOTION SENSOR

1x Black

1x Blue

NIGHTLIGHT

1x White

1x Red

For ideal set up, 2 switches are required

Switch 1- Fan Function

Switch 2- Nightlight Feature

Motion Sensor wired to a constant and independent power source for automatic operation

For more information, contact the manufacturer

Cyclone Range Hoods Inc.

www.CycloneRangeHoods.com

1-888-293-5662

Motion Sensor & Nightlight Pre-Installed Electrical Wiring

Bath Fan Pre- Installed Electrical Wiring