Modern Portable MP4400 User manual

Category
Power banks
Type
User manual

Modern Portable MP4400 is a compact, lightweight power bank with a capacity of 4400mAh, capable of charging a wide range of devices, including iPhones, smartphones, tablets, cameras, and Bluetooth speakers. It features a DC 5V/1 Amp input port and a DC 5V/1 Amp output port. The device takes approximately 5 to 6 hours to fully charge and has indicator lights to display the current charge level.

Modern Portable MP4400 is a compact, lightweight power bank with a capacity of 4400mAh, capable of charging a wide range of devices, including iPhones, smartphones, tablets, cameras, and Bluetooth speakers. It features a DC 5V/1 Amp input port and a DC 5V/1 Amp output port. The device takes approximately 5 to 6 hours to fully charge and has indicator lights to display the current charge level.

Guide For A Great User Experience:
MP4400
Simple, Modern, Portable, Fast Speed
Charging For:
iPhones, Smartphones, Tablets, Cameras,
Bluetooth Speakers and much much more.
Please Visit Us At: ModernPortable.com
1 | Page
Thank you very much for purchasing the
MP4400 Power Bank Charger by Modern
Portable. You are going to LOVE IT!
Table of Contents:
1. What is Included?
2. Tech Specs
3. How To Charge Your MP4400 Power Bank
4. How To Charge Your Device With Your MP4400
Power Bank
5. Important Notes and More Information
2 | Page
1.
What is Included?
The MP4400Power Bank Charger by Modern Portable
A Micro USB charging cable to charge your Power Bank
2.
Tech Specs
Input PortDC 5V / 1 Amp
Output PortDC 5V / 1 Amp
Capacity – 4,400 mAh
Size 95mm x 45mm x 22mm
Weight – 2.82 ounces
3 | Page
3.
How To Charge Your MP4400 Power Bank
On the top edge of the MP4400 are indicator lights for the
percentage of charge that it currently has. A blue light will
illuminate when charging. Charging time normally takes
approximately 5 to 6 hours at 1 Amp.
Plug the provided Micro USB cable into the MP4400 Micro
USB Input Port located on the side
Insert the other end of the USB cable into either an AC wall
adaptor plugged into a wall electrical socket (Not included
but the same adapter you would normally use to charge your
smart phone) or a USB port on your laptop or computer.
(Please view image below)
4 | Page
4.
How To Charge Your Device With Your MP4400
Power Bank
1. First press the button on the top of the MP4400 to turn
on
2. Plug your USB Cable into the MP4400 USB charging port
connect the other end of your cable into you device
3. Once your device is plugged into the MP4400 it will
instantly begin charging your device properly
4. Indicator lights will illuminate to show what percentage of
charge the MP4400 currently has available
The MP4400 is engineered to charge all USB devices
(current input must be higher than 50 mA). Once the
MP4400 has stopped charging your device you are able to
turn off the MP4400 by holding down the button on the top
until the indicator lights turn off. If you need to charge your
MP4400 please follow instructions for charging the MP4400
in Section 3.
5 | Page
5. Important Notes and More Information
When charging your MP4400 Power Bank do not charge other devices
from the MP4400 Power Bank at the same time.
Keep your MP4400 Power Bank out of extreme heat/cold, damp places,
water and away from flammable items
Avoid hitting, throwing or dropping your MP4400 Power Bank
When charging your MP4400 Power Bank, approximately 20% to 35% of
the external battery’s capacity will be consumed due to power lost from
heat produced by circuit, the conversion of the voltage and the cable
charging/your device. Industry average is currently 35% for the efficiency
rate.
For a fully charged MP4400 Power Bank it can take up to 6 hours
depending on the output power of the customer provided wall
charger. Depending on the wall charger output power the fourth LED
Power Meter light will stay blinking. To check the current charge level
unplug the MP4400 Power Bank and tap the on/off button. The LED
Power Meter lights will then illuminate and 1 LED light is 1% to 25% charged,
2 LED lights is 26% to 50% charged, 3 LED lights is 51% to 75% charged and
4 LED lights is 76% to 100% full charged.
FAQ
: Visit us at
www.ModernPortable.com
for all frequently asked questions
Contact Us Email
: Support@ModernPortable.com
Corp Bulk Orders
: Sales@ModernPortable.com
Modern Portable is designed & sold in the San Francisco Bay Area; Assembled in China
6 | Page
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Modern Portable MP4400 User manual

Category
Power banks
Type
User manual

Modern Portable MP4400 is a compact, lightweight power bank with a capacity of 4400mAh, capable of charging a wide range of devices, including iPhones, smartphones, tablets, cameras, and Bluetooth speakers. It features a DC 5V/1 Amp input port and a DC 5V/1 Amp output port. The device takes approximately 5 to 6 hours to fully charge and has indicator lights to display the current charge level.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI