Intermec 700cni User manual

Intermec
Brand
Intermec
Model
700cni
Type
User manual

This manual is also suitable for

Intermec 700cni is a mobile computer qualified for use in Zone 2 hazardous locations. It can operate in temperatures ranging from -10°C to +40°C and is suitable for applications that require the use of CompactFlash, Secure Digital, and SIM cards. The device must be used with the Intermec accessory cover (P/N: 815-052-001) when used outdoors. It is important to note that the batteries may not be changed or charged in potentially hazardous locations and the device may not be connected to any accessories while in such locations.

Intermec 700cni is a mobile computer qualified for use in Zone 2 hazardous locations. It can operate in temperatures ranging from -10°C to +40°C and is suitable for applications that require the use of CompactFlash, Secure Digital, and SIM cards. The device must be used with the Intermec accessory cover (P/N: 815-052-001) when used outdoors. It is important to note that the batteries may not be changed or charged in potentially hazardous locations and the device may not be connected to any accessories while in such locations.

1
700 Color Non-Incendive (NI) Zone 2
EMEA Mobile Computer
Important Operating Instructions
Intermec Technologies Corporation Model 700CNI
has been qualified under the ATEX Directive require-
ments of the European Union by DEMKO for use in
Zone 2 environments. UL is the ExCB responsible for
issuing the CoC under the IECEx scheme for use in the
same environment.
Hazardous Locations
This mobile computer is suitable for use in the follow-
ing hazardous locations:
• Zone 2, II 3 G EEx nL IIC T6 Operating Tempera-
ture Range -10°C and +40°C (+14°F and +104°F).
• Zone 2, Ex nL IIC T6 from -10°C and +40°C
(+14°F and +104°F).
Warnings and Cautions
All warnings and cautions herein must be observed for
the safety of the operator and others in potentially haz-
ardous Zone 2 locations:
• The 700CNI must only be used when the ambient
temperature is between -10°C and +40°C (+14°F
and +104°F).
• Use battery pack P/N: 318-013-003 or 318-013-
004.
• The batteries may NOT be changed or charged in
potentially hazardous locations.
• The 700CNI may NOT be connected to any of its
available accessories while in potentially hazardous
locations. This includes anything that uses the com-
munications docking connector, headset, or micro-
phone jacks.
Note: Use of the 700CNI outdoors requires
using the Intermec accessory cover (P/N:
815-052-001).
2
• The use of CompactFlash, Secure Digital, and SIM
Cards in the 700CNI while in potentially hazardous
locations is permitted as long as these cards are not
removed or changed while in the hazardous location.
• When the 700CNI is used outdoors, the Intermec
accessory cover (P/N: 815-052-001) must be used.
• The 700CNI is to be used in an area free of dust and
moisture.
• The impact testing required by Table 13 of EN
50021 was performed using the values for Low Risk
of Mechanical Damage.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved
700CNI Zone 2 EMEA Manual Supplement
*962-054-089C*
P/N 962-054-089C
  • Page 1 1
  • Page 2 2

Intermec 700cni User manual

Intermec
Brand
Intermec
Model
700cni
Type
User manual
This manual is also suitable for

Intermec 700cni is a mobile computer qualified for use in Zone 2 hazardous locations. It can operate in temperatures ranging from -10°C to +40°C and is suitable for applications that require the use of CompactFlash, Secure Digital, and SIM cards. The device must be used with the Intermec accessory cover (P/N: 815-052-001) when used outdoors. It is important to note that the batteries may not be changed or charged in potentially hazardous locations and the device may not be connected to any accessories while in such locations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers