ARX Audibox USB-DI VC is a self contained, stand alone stereo unit designed to interface stereo digital audio with professional balanced low impedance inputs. It will convert computer audio signals into ones that are happy to travel down a long line into a mixing console at the other end. It has many applications for Live Sound, Studio, or Broadcast use. If you are running Win XP or Vista, as soon as you plug the USB-DI into a spare USB port on the computer it will be recognised as a USB Audio Device, and will be ready straight away.
ARX Audibox USB-DI VC is a self contained, stand alone stereo unit designed to interface stereo digital audio with professional balanced low impedance inputs. It will convert computer audio signals into ones that are happy to travel down a long line into a mixing console at the other end. It has many applications for Live Sound, Studio, or Broadcast use. If you are running Win XP or Vista, as soon as you plug the USB-DI into a spare USB port on the computer it will be recognised as a USB Audio Device, and will be ready straight away.
To obtain warranty service for your Audibox, call, write, or Email to
ARX or the dealer you purchased it from. They will give you the
correct address to send your unit to. Have your sales receipt show-
ing date of purchase handy, and include a copy of it with your
Audibox. Please pack the unit well - we are not responsible for
any damage caused by unsuitable packing during shipment. Send
the unit to us pre-paid, by a delivery service like FedEx, UPS, or
any other service that can track the shipment. We will return it to
you freight paid. If you have any questions, or any part of this is
unclear, please write to ARX Systems in the country of purchase,
or to the address below.
PO Box 15,Moorabbin, Victoria 3189, Australia. Phone: +61 (0)3
9555 7859 Fax: +61 (0)3 9555 6747
You can also Email the factory at: [email protected]
Page 7Page 6
Page 4
Page 5
ARX Systems (ARX) warrants to the first purchaser of this Audibox
product that it is free from defects in materials and workmanship
under normal use and service. ARX’s sole obligation under this war-
ranty shall be to provide, without charge, parts and labour neces-
sary to remedy defects, if any, which appear within twelve (12)
months from date of purchase; and to supply parts only (where pos-
sible) for the life of the product to the original purchaser.
This is our sole warranty. It does not cover finish or appearance
items, nor does it apply if the Audibox has been, in ARX’s sole judge-
ment:
• Subjected to misuse, abuse, negligence or accident;
• Repaired, worked on, or altered by persons not authorized by ARX,
• Connected, installed, adjusted or used otherwise than in accord-
ance with the instructions supplied by ARX.
This warranty gives you and us specific legal rights, and you may also
have other rights which can vary from state to state.
INTERNATIONAL LIFETIME WARRANTY
As well as the USB-DI, ARX manufac-
ture other products in the unique Audi-
box range:
The ISO-Balancer for balancing unbal-
anced signals, and also the ISO De-
Balancer, which will de-balance a sig-
nal when required to connect to an un-
balanced input.
The ISO-Later is a Dual channel Un-
balanced to Balanced Low Impedance
transformer isolated converter, and the
ISO Splitter is a transformer isolated 1
input to 2 outputs splitter for splitting 1
input 2 ways in applications where com-
plete Galvanic isolation is required.
Both available in Single Channel or
Double Header format.
The Ear Driver is a Headphone Ampli-
fier with 2 pairs of Stereo inputs each
feeding two channels of headphone
level outputs. It has individual Level
controls plus a 12 - 15VDC power con-
nector. A compact, flexible unit
The Pro-DI is an ultra compact Active
Direct box, with normal High Imped-
ance input as well as a separate speak-
er level input for connection to instru-
ment amplifiers.
Other features include –20dB Pad and
Audio Ground Lift switches, plus Phan-
tom or DC power options.
Available in Single Channel or Double
Header format
Did you know...
The DI-Pre is an Ultra compact Micro-
phone Pre amp with XLR input, balanced
jack output and 10 to 60dB Gain control.
Other features include –20dB Pad switch,
Clip LED and Phantom Power switch,
plus DC power connector.
Available in Single Channel or Double
Header format
For the latest information on the complete
Audibox range, visit our website:
www.arx.com.au/audibox.htm
Using your Audibox
The USB-DI is a Direct Injection, or Di-
rect, box. It is a self contained, stand
alone stereo unit designed to interface
stereo digital audio with professional
balanced low impedance inputs. It will
convert computer audio signals into
ones that are happy to travel down a
long line into a mixing console at the
other end. It has many applications for
Live Sound, Studio or Broadcast use.
Plug and Play
If you are running Win XP or Vista, as
soon as you plug the USB-DI into a
spare USB port on the computer it will
be recognised as a USB Audio De-
vice, and will be ready straight away.
With Win 98SE, as soon as you plug
the USB-DI into a spare USB port on
the computer it will be recognised as a
USB Composite Device, and the Add
New Hardware Wizard screen will pop
up. Click NEXT on the first 2 screens,
put in the 98SE CD Rom, then select
CD Rom drive on the search screen and
click NEXT. Click Next on the following
pop up screen, then FINISH on the fi-
nal screen.
It will then install the USB Device driv-
ers, and repeat the install process for a
USB Audio Device.
A complete set of pop up installation
screens can be found on the ARX
website at:
www.arx.com/audibox_usb_di.htm
IMPORTANT #1
Operating instructions
Input Connections
Connect the USB connector to the USB-
DI and to the USB port on the computer.
On XP and Vista it will be available im-
mediately and the LED on the front of
the USB-DI will start to flash. On 98SE
The Windows default volume setting for
USB Audio Devices is 50% of maximum.
In many cases this will be too low, induc-
ing noise and hum as excessive gain may
need to be applied to deliver the level
required. We suggest increasing this vol-
ume setting to 100%.
No matter which operating system you
are using, once the USB-DI is installed,
go to Control Panel, then Sounds and
Audio Devices, then USB Audio Device,
then the Volume tab, and move the slid-
er to the right. This will give you the opti-
mum signal to noise ratio.
Please Note: Even if you reduce the
overall output with the Volume control
next to the XLR connectors, you still
need to do this step!
IMPORTANT #2
Computers are very electrically noisy
environments, and USB is a very popu-
lar Plug and Play protocol for lots of Win-
dows devices.
For fastest and quietest audio operation
you must plug the USB-DI into its own
USB port. Experiment on your computer
to find the quietest USB port, and keep it
only for the USB-DI - don't have anything
else on the same buss.
Otherwise you may get a hissing and
clicking noise every time you move the
mouse, touch the keyboard, or click on
the screen.
IMPORTANT #3
Keep mobile/cellular phones well away
(at least 2 metres/8 feet) from the com-
puter and the USB-DI. The "Dut dut-dah-
dut dut-dah-dut dut-dah-dut" sound of a
mobile phone connecting is not one that
audiences care to hear!
follow the previous instructions. You will
need the 98 SE install CD Rom.
Adjust the Audio Level as described in
the Important #1 note on the previous
page.
Output Connections
Connect a balanced microphone lead
from each 3 pin XLR connector on the
USB-DI to a pair of input channels on
the mixing console. Set the Output vol-
ume control on the USB-DI VC to 0db
(hard right) at first - you can reduce it
later if necessary. Set the Input Gains
on the channels, and Pan the channels
Left or Right as required.
To check that the USB-DI VC is set up
correctly, open your audio software, en-
sure that USB Audio Device is selected
as the default audio device, open a mu-
sic file and play.
If the output level is causing the input
channels to clip even when the input
gain is reduced, you can use the Vol-
ume control on the USB-DI VC to re-
duce the output level
That's all there is to it.
Put simply, the USB-DI VC is the USB
pro audio interface that Audio Profes-
sionals have been waiting for!
©2008 ARX Systems Pty.Ltd. ACN 006 471
825. All rights reserved. ARX Systems®
is a Registered Trade Mark.
www.arx.com.au
Latest information updates are always
available on the comprehensive ARX
website:
Owner's Manual
Audibox USB-DI VC Manual v 1.1 ©2008 ARX®
ARX Systems Pty Ltd, PO Box 15,
Moorabbin, Victoria 3189, Australia
Phone: (03) 9555 7859 Fax: (03) 9555 6747
International Fax: +61-3 -9555 6747
On the Net: www.arx.com.au
Email: [email protected]
Thank you for choosing this unique
Audibox product from ARX.
As with all ARX equipment, it has under-
gone extensive factory testing and ‘burn
in’ before shipping.
To ensure continued trouble free use,
please familiarise yourself with the con-
tents of this manual before using.
All models in the Audibox range fea-
ture the same heavy duty all-steel chas-
sis finished in attractive matt blue textured
powdercoat, with hardwearing epoxy
screen printing and large slip resistant
rubber foot pads.
By their very nature these units are com-
pact and portable; to protect your invest-
ment we’ve added numerous security
features including a slot for a computer
lock, and the option of a permanent ta-
ble mounting kit.
A rack mount kit is also available to rack
up to 3 units plus power supply in 1 RU.
Page 3Page 2
USB-DI VC
Connections and Controls:
Type B USB input port; Transformer Balanced XLR Outputs. Status LED illuminates
when the unit is connected and flashes when in use. An Output volume control lets
you attenuate the signal coming out of the USB DI VC in order to match it up with
mixer input stages and for directly driving powered speakers and similar items.
About the USB-DI VC
The USB-DI VC is a true Plug-and-Play
Digital to Analog audio interface
Transformer isolated dual XLR connec-
tors supply Balanced audio output from a
USB connection.
Full transformer balanced output isolation
eliminates earth loops / ground hum and
other interaction noise and distortion.
A front panel status LED lights up to show
the USB-DI VC is connected and will flash
when it is operating.
The Output volume control lets you atten-
uate the signal coming out of the USB DI
VC in order to match it up with mixer in-
put stages, powered speakers or similar
items.
No external power is required - all power
USB-DI VC Specifications
Input Connector
USB type B port, ground isolated
from chassis
Output Impedance
300 Ohms Transformer Balanced
Output Level
Nominal output level variable oo to
0dB with output volume control
Output Noise
USB - System dependent
ISO trans - Enviroment sensitive
Frequency Response
20 - 20 KHz ± 0.5 dB
Power
Operating current via USB Port 80mA
Output Connectors
2 x Male XLR, wired Pin 2 + Hot,
Pin 3 – Cold. Pin 1 Chassis
Construction
All-steel powdercoated chassis,
fibreglass PCB, epoxy printing,
slip-resistant rubber feet
System Requirements
• Windows PC running Windows XP
or Vista (98SE, ME supported)
• USB port
• Audio software
• 98SE will need its install CD Rom to
install driver.
VCVC
VCVC
VC
for the USB-DI is supplied by the USB bus.
No drivers are required for operation un-
der Windows XP and Vista. The USB-DI
VC is instantly recognised as a generic
USB audio device, requiring no special
driver program installation. Windows 98
SE is also supported and can be installed
as a USB composite device. You will need
the 98SE CD Rom for driver installation .
"The USB pro
audio interface
that Audio
professionals
have been
waiting for!"
VC
-
1
-
2
ARX Audibox USB-DI VC Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
ARX Audibox USB-DI VC is a self contained, stand alone stereo unit designed to interface stereo digital audio with professional balanced low impedance inputs. It will convert computer audio signals into ones that are happy to travel down a long line into a mixing console at the other end. It has many applications for Live Sound, Studio, or Broadcast use. If you are running Win XP or Vista, as soon as you plug the USB-DI into a spare USB port on the computer it will be recognised as a USB Audio Device, and will be ready straight away.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
