H99
© 2008 AS America Inc.
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
Custom Accessories Available:
❏ Corner Apron: 0707.200 (specify color)
❏ Tile Bead Kit: 751755-100
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: The Safe-T-Heater is designed to maintain water tem-
perature during operation. It will not heat cold water to desired
bathing temperature.
EVOLUTION™ CORNER
Comfortable two person design with dual back
support positions, integral seat and installed grab
bar. Includes factory installed Safe-T-Heat
Whirlpool Heater.
❏ 6060V Whirlpool
• Acrylic with berglass reinforcement
• 2.1 HP self-draining pump/motor
• Ten ow adjustable jets including:
- Two adjustable Comfort Jets™ Hi Flo
- Eight adjustable Comfort Jets™
• Three silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Pre-installed Safe-T-Heater Whirlpool Heater
❏ 6060VC Whirlpool W/EverClean
®
System
• Same as above with the EverClean System
Nominal Dimensions:
1384 x 1384 x 546mm
(54-1/2" x 54-1/2" x 21-1/2")
Installed Size:
1949 x 1661 x 546mm
(76-3/4" x 65-3/8" x 21-1/2")
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean
®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
EVOLUTION™
CORNER WHIRLPOOL
HIGH GLOSS
* See American Standard Faucet Selector
Revised 2/08
H100
© 2008 AS America Inc.
EVOLUTION™
CORNER WHIRLPOOL
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL
BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.
▲ CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
8"
(203mm)
19-1/2"(C)
(495mm)
65-3/8"
(1661mm)
18"(A)
(457mm)
21-1/2"(H)
(546mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L OF
OVERFLOW
7"
(178mm)
76-3/4"
(1949mm)
54-1/2"
(1384mm)
65-3/8"
(1661mm)
3"
(76mm)
7"
(178mm)
15"
(381mm)
5-5/8"
(143mm)
17-3/4"
(451mm)
10"
(254mm)
13-3/4"
(349mm)
CUT OUT
IN FLOOR
FOR DRAIN
OUTLINE OF
CUTOUT
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
GENERAL SPECIFICATIONS FOR 6060V WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
108 Lbs. (49 Kg.)
824 Lbs. (374 Kg.)
86 Gal. (325 L)
71 Gal. (269 L)
48 x 26-1/2 In. (1219 x 673mm)
63 x 50 In. (1600 x 1270mm)
15 In. (381mm)
24 Lbs./Sq.Ft. (116 Kgs./Sq.m)
2.1 HP, 14.4 AMPS,120V.
E-Z INSTALL WHIRLPOOL HEATER 12.0 AMPS,120V.
Revised 2/08
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard Cadenza Whirlpool 6060.028WC User manual
-
-
-
-
Whirlpool 7236VC.021 User manual
-
American Standard 2425LC-RHO.020 Installation guide
-
-
American Standard 6000.STE2 User manual
-
-
American Standard 7236V.002.020 User manual