Bernina activa 135 PE User manual

Bernina
Brand
Bernina
Model
activa 135 PE
Category
Sewing machines
Type
User manual
See appendix for differences in the
activa 135 S Patchwork Edition
135_145_S_engl 14.3.2003 15:33 Uhr Seite U2
030529.52.04_0303_a135 a145_EN
In choosing BERNINA, you are assured of years of rewarding sewing. For over 100 years my family
has concentrated on providing complete satisfaction to our customers. And it is my personal wish to
continue this tradition of offering you Swiss precision engineering combined with state of the art
technology and an after sales service second to none.
The new BERNINA activa 135 S and 145 S are characterized by a youthful appeal which is combined
with a range of added value features to give you, dear Customer, more sewing pleasure than ever
before.
Enjoy modern, creative sewing with BERNINA: our wide range of accessories as well as
our sewing publications brimming with imaginative ideas and practical tips all add to the joy of
sewing BERNINA style.
Any questions you have will be dealt with courteously and efficiently by our highly
trained BERNINA dealers, who will also be glad to service your sewing computer for you.
Fritz Gegauf Ltd.
•
BERNINA Sewing Machines
•
CH-8266 Steckborn/Switzerland
”Welcome to
the BERNINA
family”
H.P. Ueltschi
Owner BERNINA
Sewing Machine Company
135_145_S_engl 14.3.2003 15:33 Uhr Seite 1
030529.52.04_0303_a135 a145_EN
2
WARNING
To reduce the risk of burns, fire, electric shock or injury
to persons:
1. Do not allow to be used as a toy.
Close attention is necessary when the sewing computer is
used by or near children and infirm persons.
2. Use this sewing computer only for its intended use as
described in this manual. Use only attachments recommended
by the manufacturer as contained in this manual.
3. Never operate this sewing computer if
•
it has a damaged cord or plug
•
it is not working properly
•
it has been dropped or damaged
•
it has fallen into water
Return the sewing computer to the nearest authorized
BERNINA dealer or service center for examination, repair,
electrical or mechanical adjustment.
4. Never operate the computer with any air openings blocked.
Keep ventilation openings of the sewing computer and foot
control free from accumulation of lint, dust and loose cloth.
5. Keep fingers away from all moving parts. Special care is
required around the sewing needle.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical machine, basic safety precautions should
always be followed, including the following.
Read all instructions before using this sewing computer.
When the sewing computer is not in use, it should be
disconnected from the electricity supply by removing the plug
from the outlet.
DANGER
To reduce the risk of electric shock:
1. A sewing computer should never be left unattended when
plugged in.
2. Always unplug the sewing computer from the electric outlet
immediately after using and before cleaning.
3. Always unplug before replacing light bulb. Replace the bulb
with the same type rated 12 volts/5 watts.
135_145_S_engl 10.04.2003 9:50 Uhr Seite 2
030529.52.04_0303_a135 a145_EN
3Safety instructions
16. No responsibility will be taken for any possible damage as the
result of misuse of the sewing computer.
17. This sewing computer is provided with double insulation.
Use only identical replacement parts. See instructions for
Servicing of double-insulated machines.
SERVICING DOUBLE-
INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provi-
ded instead of grounding. No grounding means is provided on a
double-insulated product nor should a means for grounding be
added to the product. Servicing a double-insulated product requi-
res extreme care and knowledge of the system and should only be
done by qualified service personnel. Replacement parts for a
double-insulated product must be identical to those parts in the
product. A double insulated product is marked with the words
«DOUBLE INSULATION» or «DOUBLE INSULATED».
The symbol may also be marked on the product.
This sewing computer is intended for household use only.
SAVE THESE INSTRUCTIONS!
6. Always use the BERNINA original needle plate. The wrong plate
can cause the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
9. Turn power switch to «0» when making any adjustments
in the needle area, such as threading or changing the needle,
threading the bobbin or changing the presser foot.
10. Always unplug the sewing computer from the electrical outlet
when removing covers, lubricating or when making any other
user servicing adjustments mentioned in this instruction manual.
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
14. Before disconnecting, turn all controls to the off («0») position
then remove the plug from the outlet.
15. Do not unplug by pulling on the cord but grasp the plug.
135_145_S_engl 10.04.2003 9:50 Uhr Seite 3
030529.52.04_0303_a135 a145_EN
1
2
5
6
7
8
9
11
12
13
14
15
16
17
18
19 20 21
22
23
24
25
26
27
28
4
3
Details4
Details of the sewing computer
Front view
135_145_S_engl 14.3.2003 15:33 Uhr Seite 4
030529.52.04_0303_a135 a145_EN
27
10
14
11
34
30
31
29
33
32
5
Details
1 Bobbin cover
2 Stitch plate
3 Attachment base for
special accessories
4 Sewing table socket
5 Presser foot
6 Needle clamp with
fixation screw
7 Thread guide
8 Thread take up cover
9 Thread path
10 Thread tension
adjustment
11 Bobbin pre-tension
12 Reverse button/quick and
continuous
13 Screen
14 Bobbin winder with
on/off switch and thread
cutter
15 Stitch width button
16 Needle position button
17 Stitch length button
18 Needle stop up/down
19 1/2 speed
20 Pattern end
21 Mirror image
22 mem (memory) button
23 Alphabet buttons
24 Stitch selection buttons
25 #-button
26 clr/del-button
27 Handwheel
28 FHS connection
29 Balance adjustment knob
30 Power switch on/off
31 Power plug socket
32 Drop feed-dog
33 Foot control socket
34 Spool pin (vertical,
collapsible)
Right end
135_145_S_engl 14.3.2003 15:33 Uhr Seite 5
030529.52.04_0303_a135 a145_EN
36
40
4
37
39
42
43
3
2
45
Details6
Back view
135_145_S_engl 14.3.2003 15:33 Uhr Seite 6
030529.52.04_0303_a135 a145_EN
37
46
36
42
38
35
7
Details
35 Carrying handle
36 Presser foot lifter
(manual)
37 Thread cutter
38 Thread take up
39 Darning ring connection
40 Accessory box connection
41 Thread tension disc
42 Rear thread guide
43 Horizontal spool pin
44 Accessory box catch
45 Needle Threader
46 Lens holder
Left end
Accessory box
44
Sewing computer with Accessory box
43
41
135_145_S_engl 14.3.2003 15:33 Uhr Seite 7
030529.52.04_0303_a135 a145_EN
8 Setting up the sewing computer
•
foot control
•
instruction manual
•
power cable
•
warranty card
•
Accessory box
•
presser foot lifter
Accessories
Start-stop-unit**
With the Start-stop-unit (SSU)
the start-stop-function can be
controlled by hand.
•
press start-stop-button A =
stitching starts
•
with the speed regulator B
the sewing speed can be
regulated by hand
•
to interrupt or stop sewing =
press start-stop-button A
again
Note:
If the foot control is connec-
ted with the sewing machine,
the Start-stop-unit is out
functions.
Standard accessories*:
4 bobbins (+ 1 in the capsule
in the sewing computer)
Selection of 130/705H needles
Seam ripper
Screwdriver
Angle key Torx
Screwdriver Torx
Lint brush
Seam guide
Compensating plate
3 spool discs
Foam pad
Oiler
Fabric cover
•
protects from dust and dirt
•
compartment for accessories
Lens Set: **
We recommend the use of the
BERNINA Lens Set for more
comfort when sewing.
Caution!
To avoid injury always attach
the protective cover of the
magnifying glass holder
when the magnifying glass is
not in use.
* can vary from country to country;
see presser foot selection p. 33
** available as a special accessory
Please refer to the safety
instructions!
CFL **
Contrary to an ordinary bulb, the CFL
sewing light has a better illumination
and a longer life.
Caution:
Please note that a defective CFL
sewing light must ONLY be replaced
by an authorized technician. The
sewing computer must be brought
to an authorized BERNINA dealer!
A
B
135_145_S_engl 14.3.2003 15:33 Uhr Seite 8
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer 9
•
attach the box to the sewing computer
(catch A must engage); inserting
the presser foot lifter into the opening H
Note: first lower the presser foot lifter!
Removing the accessory box
•
press catch A on the top of the box
•
remove box to the rear
Free standing accessory box
•
pull both feet out until they click into
place
•
stand box in chosen position
Storing accessories
Standard accessories are supplied in a
plastic bag.
The box is equipped with one small and
one large drawer (B and C) as well as com-
partments for bobbin holders D and presser
feet E. (Additional compartments and
drawers are available as optional extras.)
•
push the bobbins into the compartments
provided
•
to remove a bobbin, press the compart-
ment holder F lightly
•
insert the presser feet into the slot E
•
the needle selection box can be stored in
compartment G
Attaching the accessory box to the
sewing computer
•
close the doors
•
push feet back into position
Accessory box
Available as a special accessory
A
C
F
B
D
E
H
G
he CFL
nation
FL
placed
he
ught
ler!
135_145_S_engl 14.3.2003 15:33 Uhr Seite 9
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer10
The power cable
•
plug A into sewing computer
•
plug B into wall socket
Foot control cable
•
plug C into sewing computer
Important! (USA/Canada only)
This sewing computer has a
polarized plug (one blade
wider than the other). To re-
duce the risk of electric shock,
this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrican to install
the proper outlet. Do not
modify the plug in any way.
The foot control regulates the
sewing speed
Sewing speed is adjusted by
applying more or less pressure
to the foot control.
Important! (USA/Canada only)
Use only foot controller type
SR-1 with sewing computers
activa 135 S /145 S.
Power cable
Foot control
Self storing cord
•
wind the cord on the reel
•
insert the plug into the groo-
ve provided
When sewing
•
unwind the cable
Power switch
The switch is on the handwheel
side of the computer
1 the computer is switched on
0 the computer is switched off
The sewing light is switched on
and off with the power switch.
Refer to the safety
instruction!
B
A
C
135_145_S_engl 14.3.2003 15:33 Uhr Seite 10
030529.52.04_0303_a135 a145_EN
11Setting up the sewing computer
Sewing table
Increases the sewing surface.
To attach
•
raise the needle and presser
foot
•
place the table over the free
arm and press firmly so that it
engages on the fixing cam
Attaching the presser foot
lifter
Insert into the opening in the
base plate: you should be able
to operate the lifter with your
knee in your normal sitting
position.
Note:
Your dealer can adjust it if
necessary.
Free-Hand-System (FHS) presser foot lifter* (knee-operated)
The presser foot lifter raises
and lowers the presser foot
•
push to the right
•
the presser foot is raised
•
the feed-dog is lowered
simultaneously
•
the feed-dog is raised as soon
as the first stitch is sewn
* Special accessory can vary from
country to country
To remove
•
raise the needle and presser
foot
•
pull the table out of the
fixing cam
•
pull in horizontal position to
the left
Scale
•
«0» corresponds to the centre
needle position
Seam guide
•
insert into the groove (under-
side of table) from the right or
left
•
it can be freely adjusted over
the whole width of the table
Note: Remove the presser
foot when attaching the seam
guide!
135_145_S_engl 14.3.2003 15:33 Uhr Seite 11
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer12
Winding the bobbin
•
turn power switch on
•
place empty bobbin on
spindle
•
following the direction of the arrow take thread through the rear
guide and round the pre-tension stud
•
wind it several times round the empty bobbin
•
press the engaging lever against the bobbin
•
press the foot control
•
the motor will stop automatically when the bobbin is full
•
remove the bobbin
Thread cutter
•
cut the thread on the thread
cutter
Winding the bobbin
Note:
When winding the bobbin
on the vertical spool holder
(p. 15), it may be necessary to
adjust the speed.
135_145_S_engl 14.3.2003 15:33 Uhr Seite 12
030529.52.04_0303_a135 a145_EN
13Setting up the sewing computer
Bobbin case
To remove the bobbin case
•
raise the needle
•
turn power switch to «0»
•
open the bobbin cover
•
grasp the latch of the bobbin
case
•
remove case
To insert the bobbin case
•
hold the bobbin case latch
•
the finger on the case should
point upwards
•
insert so that it clicks into
place
Bobbin thread cutter
•
insert the bobbin case
•
take the thread over cutter A
•
thread is cut
•
close the bobbin cover
Note:
The bobbin thread does not
have to be brought up as
the loose end is just the right
length to start sewing.
Refer to the safety
instruction!
A
135_145_S_engl 14.3.2003 15:33 Uhr Seite 13
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer14
Inserting the bobbin
... it lies in the T-shaped slit at
the end of the spring.
The bobbin must turn clock-
wise when thread is pulled.
Insert the bobbin
Insert the bobbin so that the
thread runs clockwise.
Pull the thread counter clock-
wise into the slot.
Pull the thread to the left
under the spring until ...
Removing the needle
•
raise the needle
•
turn power switch to «0»
•
lower the presser foot
•
loosen the needle clamp screw
•
pull the needle down to remove
Inserting the needle
•
flat side of needle to the back
•
insert the needle as far as it will go
•
tighten the needle clamp screw
Changing the needle
Refer to the safety
instruction!
135_145_S_engl 14.3.2003 15:33 Uhr Seite 14
030529.52.04_0303_a135 a145_EN
15Setting up the sewing computer
Changing the presser foot
Presser foot with shank
•
raise the needle and
•
presser foot
•
turn power switch to «0»
Attaching the presser foot
•
guide the foot upwards
•
over the cone
•
press the clamping lever
down
•
raise the clamping lever
•
remove the presser foot
Refer to the safety
instruction!
Collapsible vertical spool pin
•
found on the back of the sewing computer
behind the handwheel
•
essential aid for sewing with more than one thread, i.e. double
needle work
•
raise the pin until it clicks into its vertical position
•
when using large reels, add the foam pad A for stability
Supplementary spool pin
A
135_145_S_engl 14.3.2003 15:33 Uhr Seite 15
030529.52.04_0303_a135 a145_EN
S
Setting up the sewing computer16
C
D
E
B
Threading the upper thread
•
raise the needle and presser foot
•
turn the power switch to «0»
•
place spool on pin and attach the appropriate
spool disc – diameter of spool = disc size
•
take thread through rear guide A
•
then into slit of upper thread tension
•
pull thread down to the right of the take-up cover to B
•
then up to the left of the cover to C
•
and down through guides D and E
Refer to the safety
instruction!
A
C
D
E
C
135_145_S_engl 14.3.2003 15:33 Uhr Seite 16
030529.52.04_0303_a135 a145_EN
17Needle Threader
Needle Threader
B
A
Thread in hook
· lower the presser foot
· lay the thread behind
hook B and hold lightly
Lever down
· press lever A down and
simultaneously guide the
thread around hook B to
the right to the needle
Thread in front of needle
· put the thread from the
front into the guide until
it catches in the hook
Release the lever and thre-
ad
· let go of lever A and
thread
135_145_S_engl 14.3.2003 15:33 Uhr Seite 17
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer18
Bringing up the lower thread
•
hold the upper thread
•
sew one stitch
•
pull the upper thread until the bobbin thread appears
in the stitch plate hole
•
pull bobbin thread out of the hole and insert both
threads through the slit in the presser foot towards the back
•
pull threads over the cutter
Note:
The bobbin thread must be
brought up through the stitch
plate for certain types of
work. The length of thread
is sufficient for most normal
work if the lower thread
cutter has been used.
Thread cutter
•
pull both threads from front to back over the
cutter
•
the threads release as soon as the first stitch is
sewn
135_145_S_engl 10.04.2003 9:51 Uhr Seite 18
030529.52.04_0303_a135 a145_EN
19Setting up the sewing computer
Stitch plate
Stitch plate markings
•
the stitch plate is marked with seam guide lines in mm and inches
•
the millimetre markings are at the front
•
the inch markings are at the back
•
the measurements show the distance (with needle position centre) from
needle to line
•
lines are provided to the right and left of the needle
•
they are very useful guide lines for precise seaming
•
the horizontal lines are useful for sewing corners, etc.
Feed-dog
Button below the handwheel
Button flush with housing =
sewing position
Button depressed = feed-dog is lowered
•
for free-hand sewing (darning, embroidery, etc.)
1
5
/
8
1
10 201020
1
/
4
1
/
4
5
/
8
135_145_S_engl 10.04.2003 9:51 Uhr Seite 19
030529.52.04_0303_a135 a145_EN
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73

Bernina activa 135 PE User manual

Bernina
Brand
Bernina
Model
activa 135 PE
Category
Sewing machines
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents