8
OPERATION
Weighing and selecting the measuring unit
1. Switch on the scale by pressing the "ON/OFF" button. For a few seconds,
the display will show all symbols. Then the display will show "0 g" or
"0 oz" (depending on the last setting).
2. If you would like to select the other measuring unit, press the button "kg/lb."
3. Now place the object to be weighed on the scale (the scale displays the
weights in 1 gram intervals or in 1/8 oz intervals, respectively).
4. Wait until the display shows „H“, which indicates that the weight reading
is now stable.
5. Read the displayed value either in gram or in oz/lb (press "kg/lb" to
select).
Selecting the weighing unit
Press the button kg/lb to select between the measuring units.
Using the calibration function
If you plan to weigh the goods in a container, place the container on the scale
before switching it on. You can also "delete" the container weight by pressing
the "TARE" button.
Weighing additional items
Proceed as described under 'Weighing'. Press the "TARE" button and add the
next item to be weighed. This step can be repeated as often as necessary.
Overfill
The scale has a 5,000 g (11 lb) capacity. If this weight is exceeded, "Err" will
appear in the display.
Battery indication
If the battery indication " " appears in the display, the battery must be re-
placed. Please note: Only dispose of batteries in the special waste! Do not
place in the normal household waste.
Switching off
You can switch off the scale using the "ON/OFF" button. If you forget to do
so,
the appliance will switch off automatically after approx. 5 minutes to save po-
wer.
11534 Aldi UK Final Content.book Seite 8 Mittwoch, 21. Mai 2008 10:01 10