King Canada KC-N616 User manual

Brand: King Canada

Model: KC-N616

Type: User manual

INSTRUCTION MANUAL

MODEL: BB-N616

4 Ton

HAND OPERATED NOTCHER



WARRANTY INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS 4 TON HAND NOTCHER

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLA

CEMENT PARTS

Replacement parts for this tool are available at our authorized service centers across Canada. For servicing, contact or return to the retailer where

you purchased your product along with your proof of purchase.

LIMITED

TOOL WARRANTY

KING CANADA makes every effort to is made to ensure that this product meets high quality and durability standards. KING CANADA warrants

to the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from

defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or

alterations and lack of maintenance. KING C ANADA shall in no event be liable for death, injuries to persons or property or for incidental,

special or consequential damages arising from the use of our products. To take advantage of this warranty, the product or part must be returned

for examination by the retailer. Shipping and handling charges may apply. If a defect is found, KING CANADA will either repair or replace the

product.

IMPORTANT: IF THIS MACHINE IS DAMAGED DUE TO BENDING MATERIALS THAT ARE A THICKER GAUGE STEEL

THAN THE MAXIMUM CAPACITY., THE WARRANTY WILL BE NUL AND VOID.

IMPORTANT INFORMATION

The notching blades are made from hardened and precision ground alloy tool steel. The upper blade is bolted to an alloy casting mounted on the

ram, it is reversible. Each of the two lower blades have four cutting edges for extra cutting power, and can be easily adjusted to get a clean cut

on thinner material. Blades can be resharpened on a surface grinder.

Adjustable gauges are mounted on a 12“ x 8“ work table, which provides a large material support area for easy work handling and positioning.

Users can accurately locate a notch either at a corner or at any position along the edge of material.

The hardened and precision ground triangular ram accurately controls the position of the cutting head and provides perfect alignment at all times.

Alloy cast base and body assures extreme rigidity and durability.

HOW TO REMOVE BLADES

Remove work table and turn notcher on its side. Then remove the six bolts holding the lower notching blade and two bolts holding the supports.

Lastly, remove the three bolts holding the upper blade (see figures 1 and 2).

HOW TO ALIGN LOWER NOTCHING BLADE

It can be made by removing work table and adjusting the 3 screws in the lower notching blade. Then, insert a piece of paper and notch it to check

if it makes a clean even cut at all points. If not, adjust lower blade accordingly to achieve a exact alignment (see figure 3).

SPECIFICATIONS:

Model: ................................................................BB-N616

Capacity ......................................................................4 Ton

Material Capacity ........................................16 GA (1.6mm)

Notcher......................6’’x 6’’x 90

(152mm x 152mm x 90°)

Stroke ..............................................................3/4“ (19mm)

Table Dimension ........................18“ x 12“ (457 x 305m/ m)

Net weight................................................................95 Kgs.

Shipping Weight ....................................................125 Kgs.

Figure 1 Figure 2 Figure 3

OPERATION & MAINTENANCE



King Canada KC-N616 User manual

King Canada KC-N616 User manual

King Canada KC-N616 User manual

Related papers

Other documents