2. Crestron
  3. CSM-QMT

Crestron CSM-QMT Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Crestron CSM-QMT Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CSM-QMT Wiring
Cresnet
®
Cable Wiring Guidelines
Installation Guide
Cable Exit Location for Jamb or Ceiling Mount:
CSA-ARCH3-BRKT (Shown on the Left) and CSA-ARCH3-BRKT-DUAL (Shown on the Right)
Cable Exit Location for Jamb or Ceiling Mount:
CSA-ARCH5-BRKT (Shown on the Left) and CSA-ARCH5-BRKT-DUAL (Shown on the Right)
Description
The Crestron
®
Cresnet cable should exit the wall near the motor end of the shade
assembly for proper functionality and a clean look. This ensures that the cable is out of
sight and does not make contact with the fabric.
Refer to the illustrations that follow when running the cable.
NOTE: Use zip ties to secure the cable to the loop on the bracket.
Cable Exit Location for Wall Mount Installation: CSA-ARCH3-BRKT
Cable Exit Location for Wall Mount Installation: CSA-DECOR3-BRKT
Cable Exit Location for Wall Mount Installation: CSA-ARCH5-BRKT
Cable Exit Location for Wall Mount Installation: CSA-DECOR5-BRKT
3 in
(77 mm)
1 in
(26 mm)
Cable exit
3/4 in
(19 mm)
2 in
(51 mm)
Cable exit
3/4 in
(19 mm)
3 in
(77 mm)
Cable exit
2 in
(51 mm)
1 in
(26 mm)
Cable exit
3 in
(77 mm)
4.25 in
(108 mm)
4.75 in
(121 mm)
6 in
(153 mm)
Cable exit
Cable exit
Crestron Electronics, Inc. Installation Guide - DOC. 7923A
15 Volvo Drive Rockleigh, NJ 07647 (2047340)
Tel: 888.CRESTRON 07.16
Fax: 201.767.7576 Specications subject to
www.crestron.com change without notice.
The product warranty can be found at www.crestron.com/warranty.
The specic patents that cover Crestron products are listed at patents.crestron.com.
Certain Crestron products contain open source software. For specic information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks,
and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2016 Crestron Electronics, Inc.
/