With 140 Nm the Einhell TE-CI 18/1 Li-solo cordless impact driver effortlessly drives in large, long screws, and also helps reduce physical strain thanks

to its reverse torque. Thanks to its short, light-weight design and ergonomic Softgrip surfaces, tireless working is assured. The cordless impact driver is

equipped with 6.35 mm (¼") Hexagon Fitting for optimum operation with impact-resistant bits. The electronic speed control is finely adjustable for

delicate operation. For optimum illumination there are three power LEDs, the housing is protected by an alu housing and rubber supports, and there is

a practical belt clip for safety. It is a member of the Power X-Change family, so all system batteries can be used. These are available separat

Cordless Impact Driver

TE-CI 18/1 Li-Solo

Item No.: 4510034

Ident No.: 11016

1/4 " hex bit mount (Recommendation: impact-resistant bits)-

Speed control for fine adjustment on delicate jobs-

3 power LEDs included for good allround illumination-

Rugged aluminium housing and rubber supports for protection-

Practical belt clip for efficient and safe operation-

Supplied without battery and charger (available separately)-

Technical Data

- Idle speed 0 - 2300 min^-1

- tool collet (hex) Bit holder (6,35mm/¼")

- Type of bit interlock Mechanic locking sleeve

- Dimensions Export Carton 420 x 350 x 218 mm

- Container quantity (20"/40"/40"HC) 8630 | 0 | 0

Illustrations can contain accessories, which are not included in standard extent of delivery

18V 4,0Ah PXC Starter Kit

PXC-Starter-Kit

Item No.: 4512042

Einhell Accessory

Power-X-Boostcharger 6 A

Charger

Item No.: 4512064

Bar Code: 4006825629019

Einhell Accessory

18V 2,0 Ah Power-X-Change

Battery

Item No.: 4511395

Bar Code: 4006825610369

Illustrations can contain accessories, which are not included in standard extent of delivery