English
Front
Introduction
Package Contents
Product Diagram
How To Use
4.1 General functions
4.2 Pairing to mobile phone
4.3 Charging your headphones
Product Specifications
Notes
1
2
2
3
3
4
5
6
7
1
2
3
4
5
6
Congratulations, and thank you for choosing
Naxa’s new Bluetooth Wireless Headphones.
This manual will help you operate your new
Naxa earphones, but you should first
familiarize yourself with the Bluetooth
®
functionality of your mobile phone or other
external devices before using the Bluetooth
Wireless Headphones.
1 2 3
1.Introduction 2. Package Contents
5.Product Specifications 6.Notes
4.How To Use
4.3.Charging your headphones
4.1.General Functions
4.2.Pairing to a mobile phone
Pairing to a Bluetooth
®
Enabled Mobile Phone
Warning:
To use your Bluetooth
®
headphones, you
must first pair your headphones with a
phone. Once your Bluetooth
®
headphones
are paired to mobile phone, they will remain
paired and automatically recognize each
other whenever they are within range.
1.These headphones also allow you to listen
to music from external devices via the
3.5mm auxiliary port. Plug one end of the
included Aux cable into the auxiliary port
and the other end in the aux-out port of
external media device you wish to play
audio from.
* The headphones do not need to be on
when in Aux mode.
2. Never use these headphones near
water or in damp environments.
3. Always make sure your hands are dry
when handling these headphones.
4. These headphones are intended for
personal use only. Commercial use voids
the warranty and the supplier cannot be
held responsible for injury or damage.
5. Keep these headphones out of the
reach of children.
3.Product Diagram
Turn on your phone and ensure the Bluetooth
function is activated.
•
• Hold the Power Button till the headphones turn on
and the LED indicator light begins flashing blue.
• Search the Bluetooth
®
devices on your phone
by following the phone’s instructions. Refer
to your phone’s user manual for more
information.
• After a few seconds the phone will list the
“NAXA NE-975” as a discovered device. Select it.
Follow your phone’s instructions to establish a
pairing. Enter “0000” if a password prompt appears.
• Upon successful connection, the LED indicator light
will remain blue and the headphones will beep once.
Use the Micro USB cable provided with
these earphones. Connect the Micro
USB plug to the Micro USB charging port
on the right earcuff of the headphones.
Connect the USB plug to a USB port on
a computer or wall adapter to begin
charging.
* Before inital use, fully charge the headphones.
** The LED indicator light will be red while the
headphones are charging. The light will turn blue
when ready for use.
You must select a qualified charger from
a regular manufacturer.
You must charge the Bluetooth headphones
if it has been not used for more than 12
months.
USB Plug Micro USB Plug
Contents
1X Micro USB Cable
1X Instruction Manual
1X Warranty card
1X Wireless Bluetooth
1X 3.5mm Auxiliary Cable
®
Head
phones
40mm
32Ohms
110 / ± 3dB
Version 4.2
Rechargeable
200 mAh
33 Feet
2.5 Hours
Up to 5 Hours
Speaker Diameter
Frequency Range 20Hz-20KHz
Impedance
Sensitivity
Bluetooth
Battery Type
Battery Capacity
Wireless Range
Charging Time
Talk Time
NE-975
WARRANTY
Support
If you have problems with your device,
please consult the instructions in this
manual. Please also visit us on the web
at www.naxa.com to get up the minute
news, alerts, and documentation for your
device. For additional assistance, please
contact Naxa Technical Support.
Bluetooth® Wireless Headphones
1 Please follow the rules depicted in this
manual closely to ensure your safety.
Before using the product, we would
strongly encourage you to read
through this user manual.
2 Be wary of any edges, uneven surfaces,
metal parts, accessories and its
packaging to prevent any possible injury
or damage.
Do not modify, repair or dismantle the
product. Doing so may result in fire,
electric shock, complete breakdown
of the product, etc. All of which are
not covered under warranty.
3
Do not use any diluent or volatile liquid
to clean the product.
4
Do not use the product in a hazardous
location.
5
Safety Rules
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/supportcenter/
Keep All Relevant Information for Future Reference.
Desired Result Required Action
Turn on &
Enter the
pairing mode
Pairing
Turn off
Charging
Use a Bluetooth
®
enabled mobile
phone or other Bluetooth
®
enabled
device to perform necessary pairing
actions.
Plug the Micro USB plug into the
micro USB charging port.
Answering
a Call
Hold the Power Button to turn on.
LED light will begin flashing blue.
Hold the Power Button.
Play / Pause
Musi
c
Vol+/
Next Track
Vol-/
Previous Track
Press the
to play music. Press again to pause.
Play/Pause button in standby
PressPlay/Pause to answer calls.
Press Play/Pause to end calls.
Hold Play/Pause for 2 seconds to
refuse calls.
Hold the - button to decrease the volume.
Press to go to the previous track.
(1) Volume Up / Next Track
(2) Play / Pause
(3) Volume Down / Previous Track
(4)
(1)
(2)
Operation manual
Please read the manual before operat ing
this product.
®
®
(3)
(4)
Hold the + button to increase the volume.
Press to skip to the next track.
Auxiliary Port
(5)
(6)
(5) Power Button
(6) Micro USB Charge Port
1
Naxa NE-972 Owner's manual
Naxa NE-970 True Wireless Bluetooth Headphone & Charging Case Operation Owner's manual
Naxa NE-974 Owner's manual
Naxa NAS-3097 Owner's manual
Naxa NAS-3102 Owner's manual
Naxa NAS-3101 Owner's manual
Mixcder HD901 User manual
Xtreme XBH9-1021 User manual
Zeeva International 2ADM5-HP-0194 User manual
Sharper Image Bluetooth CD and DVD Boombox Radio Owner's manual
Victor VHRP-1400-TQ 7-IN-1 Turntable Music Center User guide
Sound Pro NDS-1010 User manual
BASS JAXX HP0265 User manual
PyleSport PWPBT15W Owner's manual
Aftershokz SPORTZ TITANIUM User manual
