LG SP242CM User manual

Type
User manual

This manual is also suitable for

OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO:MFL67445119
www.lg.com
SP092CM
NY0
SP092CM
UY0
TYPE:WALL MOUNTED
MODELS
ENGLISH ESPAÑOL
ENGLISH
ESPAÑOL
SP092CM
US0
SP121CM
NY3
SP091CM
UY0
SP091CM
US0
SP121CM
UY3
SP121CM
US3
SP122CM
UY1
SP242CM
N51
SP242CM
U51
SP091CM
NY0
SP122CM
NY1
SP122CM
US1
SP182CM
N52
SP182CM
U52
SP182CM
SP242CM
US2
US1
Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your
indoor unit type.
Product Introduction
Product Introduction
Standard Split Type
Art Cool Type Wide
Display panel LED indicators
Air inlet
3M multi protection filter&Plasma filter (Optional)
Air filter
Air outlet
Front grille
ON/OFF button
Signal
receiver
Grille tab
Flap
(Horizontal blade)
Louvers
(Vertical blades)
Indoor Units
ENGLISH
Art Cool Deluxe(Type 1)
Display panel LED indicators
Signal receiver
Front panel
Air discharge
Power cord
ON/OFF button
Plasma filter
Air inlet
Air filter
Art Cool Deluxe(Type 2)
Display panel LCD indicators
Signal receiver
Front panel
Air discharge
ON/OFF button
Power cord
Plasma filter
Air inlet
Air filter
Maintenance and Service
Indoor Unit
Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and
unplug the power cord.
Clean the unit with a soft dry cloth. Do not use bleach or abrasives.
Never use any of these
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.
Air Filters
The air filters behind the front panel / grill should be checked and
cleaned once in every 2 weeks or more often if necessary. To
remove the filters see the self explanatory diagrams for each
model type. Clean the filters with a vacuum cleaner or warm
soapy water. If dirt is not easily removed, wash with a solution of
detergent in luke warm water. Dry well in shade after washing and
reinstall the filters back in place.
Plasma Filters (Optional)
The plasma filters behind the air filter should be checked and
cleaned once in every 3 months or more often if necessary. To
remove the filters see the self explanatory diagrams for each
model type. Clean the filters with a vacuum cleaner. If it is dirty
wash it with water and dry well in shade an install back in place.
G
a
s
o
l
i
n
e
P
o
w
d
e
r
Maintenance and Service
Do not washed the 3M filter with water, because the filter can be damaged.
3M multi protection Filter
The 3M multi protection filter behind the air filter should be checked and
cleaned once in every 1 month or more often if necessary. To remove the
filters see the self explanatory diagrams for each model type. Clean the filters with
a vacuum cleaner. Do not wash the 3M multi protection filter with water, because the filter
can be damaged. And then insert the filter into original position.
We suggest changing 3M multi protection filter every 6 months.
The location of the filters may differ, depending on the model.
If you need more filters,please contract the LG service center
(refer to the warranty card,)
Pull out the 3M multi protection filter from the separately packed plastic bag.
Installation of new 3M multi protection filter
Insert the 3M multi protection filter into the case.
3M multi protection filter is installed with 3M Mark front.
1. Deluxe (Type 1):
Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the
air filters. Then pull out the plasma filter
2. Deluxe (Type 2):
Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.
After cleaning and drying well reinstall the filters in their original position.
Front panel
Panel hook
Plasma filter
Plasma filter
Front panel
3. Standard Split Type : Two different methods to open the front panel based on types of air
conditioner as below ;
Type 1: Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the plasma and 3M multi protection filter by slightly pulling
forward.
How to use the front panel
1. Front panel closing
Move the link upward and close the front panel.
2. Front panel removing
Raise the link up to hook hanger and remove
front panel forward.
Plasma filter
(optional)
3M multi
protection filter
Maintenance and Service
ENGLISH
Removal of Filters
Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock.
www.lg.com
SP092CM
NY0
SP092CM
UY0
SP092CM
US0
SP121CM
NY3
SP091CM
UY0
SP091CM
US0
SP121CM
UY3
SP121CM
US3
SP122CM
UY1
SP242CM
N51
SP242CM
U51
SP091CM
NY0
SP122CM
NY1
SP122CM
US1
SP182CM
N52
SP182CM
U52
SP182CM
SP242CM
US2
US1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

LG SP242CM User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages