2. PULSE Showerspas
  3. 3010-TS-ORB
3010-TS-ORB

PULSE Showerspas 3010-TS-ORB, Bath Spout Installation guide

  • Hello! I am an AI chatbot trained to assist you with the PULSE Showerspas 3010-TS-ORB Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
297 Anna St. | Watsonville, CA 95076
Toll Free: 888.785.7320
www.PulseShowerSpas.com
TUB SPOUT WITH DIVERTER
Model # 3010-TS-CH | 3010-TS-BN | 3010-TS-ORB
Measurements shown are for reference only
PULSE18-Rev.A
2 1/2”
5 1/4”
3 3/16”
Apply
plumbers
putty.
•Apply thread sealant and install a 1/2” NPT nipple, extending 4”
(102 mm) beyond the finished wall, to the bath elbow.
•Apply thread sealant to the nipple, and install the spout to the nipple.
•Carefully tighten with a clean strap wrench.
•Remove any excess putty.
Apply
plumbers
tape.
Standard Length Spouts
Specifications
4”
(102 mm)
Nipple
/