Sytech RPTROTTERV Owner's manual

Brand: Sytech

Model: RPTROTTERV

Category: Scooters

Type: Owner's manual

This manual is also suitable for

RPTROTTERA

RP·TROTTER

E·SCOOTER

TROTTER

USER

MANUAL

IMPORTANT

NON-COMPLIANCE WITH SAFETY INSTRUCTIONS COULD

CAUSE SERIOUS BODY DAMAGE AND IN EXTREME CASES,

DEATH.

WELCOME

Thank you for your purchase of the Roller-Pro Trotter E-Scooter!

The Roller-Pro Trotter E-Scooter takes the power of electricity, the style of

a traditional scooter, adds them together, and tops it off with a bit of swag.

To ensure your safety and the safety of others, please read and follow the

guidelines in this user manual carefully and thoroughly before and during

riding.

If you have any questions regarding the Roller-Pro Trotter E-Scooter,

Contents

IMPORTANT ....................................................................................................................... 2

WELCOME .......................................................................................................................... 2

GENERAL INFORMATION ................................................................................................. 3

MAIN SPECIFICATIONS .................................................................................................... 8

PARTS & FEATURES ....................................................................................................... 10

CONTROL PANEL ............................................................................................................ 11

FOLDING & ASSEMBLY .................................................................................................. 12

CHARGING THE BATTERY ............................................................................................. 14

USAGE .............................................................................................................................. 15

MAINTENANCE ................................................................................................................ 17

DECLARATION OF CONFORMITY .................................................................................. 19

GENERAL INFORMATION

Before operating this vehicle, please read all instructions. This

manual will guide you through the functions, usage, and proper care

of your Roller-Pro Trotter E-Scooter. If you have any questions or

cannot find the information you need in the manual, please contact

your place of purchase or our customer service center. Before

contacting customer service, please have your purchase information

ready as this may be needed during the call. This information may be

recorded below.

It is important that you fo

llow all safety warnings that

appear throughout this manual and exercise good

judgment when using your Roller-Pro Trotter E-

scooter.

Consult this manual before attempting to ride.

1.1 Important Information

Within this manual, “the Roller-Pro Trotter E-Scooter”, “your Roller-

Pro Trotter E-Scooter”, “your scooter” and “the Trotter” refer to the

Roller-Pro Trotter E-Scooter. The Roller-Pro Trotter E-Scooter is a

personal scooter that uses electrical power. By riding the Roller-Pro

Trotter E-Scooter, the user acknowledges and accepts responsibility

for all risks associated with the use of the scooter which may include,

but are not limited to, muscle injuries, broken bones, lacerations,

serious injury, and possible death, which may be sustained while

using the Roller-Pro Trotter E-Scooter.

To better ensure your safety, ALWAYS USE APPROPRIATE

PROTECTIVE GEAR, read and follow all instructions and warnings

in the User Manual.

Appropriate protective gear should always be worn at all times.

Use the Roller-Pro Trotter E-

Scooter at your own risk.

ROLLER-

PRO shall not be held responsible for accidents due

to poor judgment.

1.2 Safety Warnings

When reading this manual, note these icons:

Notes with this icon MUST be read, understood, and obeyed to

Prevent injury or

damage, etc. Notes with this icon include

relevant information.

Properly dispose of all packaging material. Some items may be

packed in plastic bags or other material and may cause

suffocation or injury to pets or children.

Keep the

packaging in a safe place in case it needs to be used

later for transportation.

Verify that all parts of the product are available. If any part is

missing, contact Roller Pro customer service center. If any

ports or cables or surrounding parts are dama

ged, do not use

the product.

Always use the original accessories supplied. Charge your

Trotter E-

Scooter using the included charger. The use of a

different one could cause failures in the product and invalidate

its warranty.

Always use appropriate clothing when riding the Trotter

E-

Scooter. In order to avoid any injury, it is always

recommendable to use knee pads, elbow pads, gloves.

Do not use the product if your weight less than 15

Kg or exceed

90 Kg.

Do not attempt to open or modify your Trotter E-

scooter as

doing so will void the manufacturer´s warranty and could lead

to serious injuries or death.

Do not use your Trotter E-

scooter in situations or places where

you can cause danger or an accident to people around you.

Never ride your Trotter E-

scooter under the influence of drugs

or alcohol. Do not ride in case you are tired.

Do not ride your Trotter E-

Scooter in ramps, curbs, slopes,

slippery surfaces or try to perform acrobatics or tricks. This can

cause serious injuries.

Always use your Trotter E-

scooter in a smooth way. Do not be

aggressive as this can cause failure or an accident.

Do not use your Trotter E-

scooter in wet areas where water is

present, muddy places, sandy places or stony roads.

Do not ride your Trotter E-

scooter during bad or stormy

weather. Example: Rain, snow, hail, frost, fog, extreme heat.

Never insert

objects into the product other than the cables etc.

as described in this manual.

Be very careful when allowing children or elderly people use

the product. These people may not have the physical abilities

necessary to drive safely.

Respect always all the traffic signals and make sure you

observe the direction in which you are riding your Trotter E-

scooter. Always be careful of pedestrians or nearby people and

objects.

Do not ride your Trotter E-scooter while talking on the phone

writing a message or conversing with someone. This could

cause an accident.

Do not ride your Trotter E-

scooter on highways, bicycle lane,

bus lane, near cars. It is important you check the local laws

before starting to use your E-scooter.

the product is to be used by children, the caregiver should

explain the contents of the user manual to the children. The

caregiver should provide adequate supervision to ensure that

the device is being used as explained in the user manual.

Risk of

shock! Do not allow water and/or liquids to come in

contact with any part of the product. Use dry, non-

abrasive

cloth to remove debris or dust. Do not spray liquids onto the

product.

Never submerge the product or any of the product’

components and/or

accessories into water. Do not ride over

stairs.

Do not allow more than one person on the scooter at a time.

Do not jump on the E-scooter.

People with a lack of balance or pregnant should not use this

product.

Be very careful when allowing children or elderly people use

the product. These people may not have the necessary

Physical abilities to drive safely.

Always calculate the distance required for braking. The Trotter

E-

scooter employs an electronic brake which reacts gradually.

Therefore, it is extremely important to apply the brakes on time

in order to avoid any collision.

Do not ride your Trotter E-

scooter in dark areas where there is

no light.

Do not place your feet in any other area besides the inferior

base where you are supposed to have them.

Always avoid riding through potholes or stony roads as this will

deteriorate the E-scooter parts and will cause failures.

The product shall only be used as described in this manual.

When not in use, cover the E-

scooter to protect it from dust. Do

not store it in a dusty environment, humid, as this may cause

damage over time.

WARNING- RISK OF FIRE - No user serviceable parts

IMPORTANT:

YOU MUST COMPLY WITH ALL LOCAL LAWS AND/OR STATES OF YOUR

REGION/COUNTRY ON THE USE OF THIS TYPE OF DEVICE

1.3 Disposal at End-of-Life

This product must not be disposed of by incineration, landfilling, or mixing

with household trash. Improper disposal of the battery contained within this

product may result in the battery heating up, rupturing, or igniting which

may cause serious injuries. The substances contained inside the battery

present chemical risks to the environment. The recommended disposal for

ROLLER-PRO

Roller-Pro Trotter E-Scooter at its end-of-life is to dispose

of the entire unit at or through an e-waste recycling center, program, or

facility. Local regulations and laws pertaining to the recycling and disposal

of lithium-ion batteries and/or products containing them will vary according

to country, state, and local governments. You must check laws and

regulations corresponding to where you live in order to dispose of the

battery and/or unit properly. It is the user’s responsibility to dispose of their

waste equipment properly in accordance with local regulations and laws.

For additional information about where you should drop off your batteries

and electrical or electronic waste, please contact your local or regional

waste management office, your household waste disposal service, or your

point-of-sale.

MAIN SPECIFICATIONS

This section is intended to provide basic information about your

E-Scooter, battery and charger. Please read this section carefully for user

safety and to prolong the life of your battery, as well as improve battery

performance. Please follow these instructions.

When the battery indicator shows low battery capacity, please charge your

battery 3 hours using the supplied charger that you received in your

scooter package. To fully recharge your battery please follow the

instructions under charging your scooter

Dimensions unfolded 81 x 42 x (92-102) cm.

Folded dimensions 90 x 42 x 29 cm.

Weight 7,6 kg

Max. load 90 kg

Recommended driver’s age 12 - 50 years

Recommended driver’s height 100 - 180 cm

Maximum speed

24 km/h

Range 8 - 12 Km

Maximum incline 15°

Operating temperature 0 °C to +40 °C

Storage temperature -10 °C to 40 °C

Protection class IP54

Battery voltage 25,2V. - 4.0Ah

Maximum Output voltage DC 29,4V. 1.5Ah

Rated capacity 101 w/h

Motor power 250 W Brushless

Rated input voltage (AC) 110-240V. / 50/60Hz.

Charging time 3 hours approx.

Tires Hard rubber

These figures may vary depending on the speed, the person's weight and the unit's load (typical range: maximum load,

50 kg load, 25ºC and 60% maximum average speed on a flat surface)

BATTERY WARNINGS

 Failure to follow the Safety Precautions listed in the Battery Warning could lead to

serious bodily injury and death. Seek immediate medical attention if you are exposed

to any substance that is emitted from the battery.

 Do not attempt to modify, change, or replace your battery.

 Do not use your scooter if the battery begins to emit odor, overheats, or begins to

leak.

 Do not touch any leaking materials, or breathe fumes emitted

 Do not allow children and animals to touch the battery.

 The battery contains dangerous substances, do not open the battery, or insert

anything into the battery.

 Please only use the charger provided by scooter.

 Do not attempt to charge the scooter if the battery has discharged or emitted any

substances. In that case, the battery should be abandoned for safety. Please follow all

local, state and federal laws in regards to recycling, handling and disposing of Lithium

Ion batteries.

 The scooter should only be shipped in its original packaging.

 Do not throw away your box as you need you scooter packaging for future use.

PARTS & FEATURES

What’s in the Box?

■ 1 x Roller-Pro Trotter E-Scooter

■ 1 x Charger

■ 2 x Handles

■ 1 x User Manual

■ 2 x wrench (3mm / 5mm)

■ Warranty card

Display

Accelerator

LED Light

Front Wheel

Handle

Electric Brake

Lock buckle

Folding Latch

Rear Brake

Deck

Vibration Light

Motor

Charging port

Kickstand

CONTROL PANEL

Speed range 1: 1-5 km/h

Speed range 2: 5–15 km/h

Speed range 3: 15–24 km/h

Increase speed level +

Power key Switch

display mode

Reduce speed level -

FOLDING & ASSEMBLY

Make sure the Roller-Pro Trotter E-scooter is turned off before working with any of its

parts. The scooter comes mostly assembled within the package.

Some minor assembly is required before riding. All parts and tools are included.

Assembling:

 Install the Handlebars and tighten the handles.

Before installing the handles,

please make sure to

differentiate the left & right

handles carefully. Please see

the difference of left & right

handles from below images.

How to adjust height of extension pole

 Open the lock buckle of extension pole.

 Press down height-limit button (the metal bead in hole of extension pole), and pull

extension pole to the length (3 levels of height for option) to fit rider's height. When the

bead goes into the hole, the height is fixed.

Lock buckle

 Close the lock buckle.

Note:

The extensive height is prohibited to exceed the first upper Limit hole.

Limit ball must be perfectly placed into the limit hole when the extensive height

is finalized. Before riding, it's a must to fasten lock buckle first.

Any operation violating above instructions causes falling down by the loose

front pole.

Unfolding

You can unfold the E-scooter without any inconvenience in seconds.

 Pull up the tube of the folding construction, then pull up the front pole, when bottom of

the folding tube goes into the slot, the unfolding completed.

Folding

 The Trotter E-scooter can be folded in a few seconds at the press of a single lever.

 Pull up the tube of the folding construction, then push down the front pole. When the

bottom of the folding tube goes into the slot, the folding is completed.

 Close the lock buckle.

Height-limit button

CHARGING THE BATTERY

Ensure the scooter is turned off before proceeding to charge the battery.

Locate the charging port on the bottom part of the scooter.

Use the supplied charger to connect it to the charging port and to the wall outlet.

While the scooter is charging, the adaptor indicator light will turn red.

If charging for the first time, charge the scooter for at least 3 to 4 hours

before using it. Make sure the E-scooter is turned off.

Do not use any other charger than the one which is supplied with your

Trotter E-scooter. If you use any other charger, it will cause failure and

the warranty will be void.

Once the scooter is fully charged, the adaptor indicator light will turn green.

Disconnect the AC charger from the port and the wall outlet.

IMPORTANT NOTES ABOUT CHARGING

If the green light on your charger does not turn RED when you plug it into your scooter, it could

mean you have to check the cables to ensure you have a proper connection; or that your scooter

is already fully charged. Push and hold your power button next to the charging port to check the

status of your battery in the display.

Do not overcharge, as this will affect the life of the battery.

Do not, under any circumstances, use the E-scooter while it is connected to the charger.

To maximize the battery life, charge it once every 20 days or even once a week especially

after riding. This process is very important for the battery to keep running.

Charge preferably in places away from flammable products.

Monitor and control the charging process (Do not exceed the recommended charging time).

Do not charge your E-scooter at night while you are sleeping.

If your E-scooter has been exposed to High or Low temperatures, wait until it has reached

its normal temperature before charging.

USAGE

Read the following information before attempting to ride your Roller-Pro Trotter E-scooter.

The Roller-Pro Trotter E-scooter supports up to 90Kg. Do not carry passengers.

Only operate the Roller-Pro E-scooter where permitted. Local laws may restrict

where you may ride. Please consult your local area laws and restrictions.

The Roller-Pro Trotter E-Scooter contains a motor and may be classified as a motor

vehicle under local laws in your area. It is your

responsibility to abide by any local

laws restricting how or where you may ride.

How to Ride:

Before starting to ride, make sure you are well equipped and protected. The Roller-Pro

Trotter E-Scooter is placed on a flat level surface and is fully charged. Follow the

below steps. For your safety, please read this entire section before attempting to ride.

1. Press the Power key button during 3 seconds to on your E-scooter.

Step 1: Carefully step on with one foot and stand upright but relaxed. Grab both

handles.

Step 2. Keep one foot on the ground and press the throttle very slowly to begin

accelerating. Use the handles to steer.

Step 3. Start your Roller-Pro Trotter E-Scooter by pressing the power button, and

Continue accelerating by pushing the throttle.

Step 4: To stop, release the throttle and use the handbrake, footbrake, or both to

Gradually come to a stop. Step out of the scooter by putting one leg at a time.

Press the rear mudguard for rear manual brake.

Warning: Your E-scooter integrates both electric brake and rear physical brake. The

electric brake is prior to rear brake, which is only used as auxiliary brake when electric

Power key

brake does not work properly.

DO NOT step on rear brake for a long time as it will tear the tire and break the fender.

Step 5: Turn off the scooter when finish using the product.

Light function

The front light includes 3 different light modes. Press the button located on the front part of

the light to switch between the different available modes.

1. LED flashes with short intervals.

2. LED flashes with longer intervals.

3. Permanent lighting.

4. Press the button the fourth time to turn off the light.

Operating Distance:

Please notice the scooter can travel a distance of 8-12 km on a fully charged battery in ideal

conditions. The following are some of the major factors that will affect the operating range

of your scooter.

Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as well

as rough or uneven terrain will reduce your distance significantly.

Weight: The weight of the user can affect driving distance; a lighter user will have further

range than a heavier user.

Ambient temperature: Please ride and store the scooter under recommended temperatures,

which will increase driving distance; battery life, and overall performance of your scooter.

Maintenance: Reasonable battery charging and maintenance will increase the distance.

Overcharging the battery can reduce range.

Power key

Speed and Driving Style: Maintaining a moderate speed will increase your distance; while

travelling at high speeds for extended periods, frequent starts, stops, idling, along with

frequent acceleration and deceleration will reduce your overall distance.

MAINTENANCE

Do not perform any maintenance when the power is on, or the battery is charging.

After each ride, especially if you have travelled a long distance, inspect your

scooter.

 Inspect the brakes to make sure that is working properly.

 Make sure all screws and bolts are taut and properly fastened to prevent injury

and Unnecessary wear and tear.

 Check the tires for damage or excessive wear

Cleaning:

Remove dirt with a soft, damp cloth. Remove stubborn dirt with a bit of toothpaste and a

toothbrush, then use a damp cloth to clean. Remove scratches with sandpaper or other

polishing materials.

Warning: Do not use alcohol, gasoline, kerosene or any other corrosive, volatile chemical

solvents for cleaning. This will seriously damage the appearance and the structure of the

scooter. Do not use a high-pressure cleaner and ensure that the charging cable has been

unplugged and the rubber cap is tightened when cleaning with water. Risk of electric

shock or serious product failure.

When not in use, store the electric scooter in a dry and cool place; avoid long-term

Storage outdoors. Direct sunlight, extreme heat or cold will accelerate the aging of

When not in use, store the electric scooter in a dry and cool place; avoid long-term

storage outdoors. Direct sunlight, extreme heat or cold will accelerate the deterioration of

the electric scooter and its tires and generally reduce the life span of the battery pack.

Storage:

It is extremely important to fully charge your battery before storing.

If you are storing your scooter for an extended period of time, please fully charge your

scooter at least once every month.

If the ambient temperature of the storage location is below 0°, please do not charge. You

must bring the scooter into a warmer environment before charging. Check under Battery

Information and Specifications for more details.

To prevent dust from getting into your scooter, try wrapping it or sealing it with its original

packaging.

Store your scooter indoors, in a dry and suitable temperature.

Battery maintenance:

1. Do not use third party batteries; this can cause technical defects.

2. Do not touch the battery contacts, and do not open or expose the battery casing.

Avoid metal objects touching the battery contacts; this will cause a short circuit,

damage the battery or cause personal injury or death.

3. To avoid the risk of damage and fire, only use the original charger.

4. Improper disposal of used batteries may cause serious contamination of the

environment. Observe local regulations when discarding of the battery pack. Do not

dispose of the battery pack with the household waste.

5. After each use, recharge the battery.

Do not expose the battery to temperatures above 50°C or below -20°C (e.g. in the boot of

a car). This can lead to battery failure, overheating, and fire. Charge the battery if you

will not be using your scooter for more than 30 days. Store it in a cool and dry place

and fully charge it every 60 days. Damages due to non-observance are not covered by the

warranty.

Avoid completely discharging the unit to preserve the utility of the battery life, make sure to

charge the battery before the battery can be 100% drained out. If the battery runs out, put

it to charge immediately. Charge the battery at room temperature as the life span and

performance of the battery will drop in temperatures below 0°C.

Warning: A fully charged electric scooter battery is depleted after approx. 120-180 days in

standby mode. The battery is equipped with a smart chip to record the battery charge and

discharge situation. Prolonged non-charging can cause irreversible damage to the

battery, which is not covered by your warranty. Only a qualified service technician is

allowed to remove the battery pack as this holds the risk of serious injuries through electric

shock or short circuit!

DECLARATION OF CONFORMITY

Manufacturer Name: Satyatrade S. L.

Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.

Camarma de Esteruelas, 28816 Madrid

Tel: 902 430 967

Fax: 91 8864285

NIF: B83254763

Manufacturing country: China

Description: Roller-Pro Electric Bike

Roller Pro® RP-TROTTER complies with the following directives:

EMC Standards: Directive 2014/30/UE

EN55014-1: 2017

EN55014-2: 2015

EN6100-3-2: 2014

EN6100-3-3: 2013

LVD Standards: Directive 2014/35/UE

EN60335-1: 2012+A11: 2014+A13:2017

MD Standards: Directive 2006/42/CE

EN60204-1: 2006+A1: 2009+AC2010

ROHS Standards: Directive 2011/65/UE sobre restricción de sustancias peligrosas

AC CHARGER:

EMC Standards: Directive: 2014/30/EU

EN55014-1: 2006+A2:2011

EN55014-2: 2015

EN61000-3-2: 2014

EN61000-3-3: 2013

LVD Standards: Directive: 2014/35/UE

EN60335-1: 2012+A11:2014

EN60335-2-29: 2004+A2: 2010

EN62233:2008

BATTERY :

Directive : UN38.3

Directive : 2013/56/EU

Signed: Ajeet Nebhwani Utamchandani

Sole Administrator

www.rollerpro.es

Sytech RPTROTTERV Owner's manual

Brand: Sytech

Model: RPTROTTERV

Category: Scooters

Type: Owner's manual

This manual is also suitable for

RPTROTTERA

Download PDF

report

Sytech RPTROTTERV Owner's manual

This manual is also suitable for

Sytech RPTROTTERV Owner's manual

Related papers

Other documents