Bel Air Lighting 1100 BK User manual

Bel Air Lighting
Brand
Bel Air Lighting
Model
1100 BK
Type
User manual

Bel Air Lighting 1100 BK is a 1 LT PENDANT light fixture that requires a 60-watt max. E26 incandescent bulb. It is designed to be connected to an electrical system that provides a means for equipment grounding. The fixture includes a mounting unit that attaches to a junction box (not included) and a canopy that secures the fixture to the junction box. The fixture also includes a preinstalled socket ring, shade, and ball nuts. The fixture can be used in a variety of indoor settings, such as bedrooms, living rooms, and dining rooms.

Here are some of the features and possible use cases for the Bel Air Lighting 1100 BK:

Bel Air Lighting 1100 BK is a 1 LT PENDANT light fixture that requires a 60-watt max. E26 incandescent bulb. It is designed to be connected to an electrical system that provides a means for equipment grounding. The fixture includes a mounting unit that attaches to a junction box (not included) and a canopy that secures the fixture to the junction box. The fixture also includes a preinstalled socket ring, shade, and ball nuts. The fixture can be used in a variety of indoor settings, such as bedrooms, living rooms, and dining rooms.

Here are some of the features and possible use cases for the Bel Air Lighting 1100 BK:

1 LT PENDANT
Item: 1100
x 2
Ball Nut
x 2
60-watt max. E26
incandescent bulb
x 1
x 1
x 1
2. Attach mounting unit (AA) to
the junction box (not included)
with mounting screws (BB). Note:
the support screws on the
mounting unit (AA) should
protrude out away from the
junction box.
2
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents
list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses,
Ladder, Wire Stripper
• All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact your
municipal building department to learn about your local codes, permits and/or inspections.
• Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician before
installation.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a
two-wire system that is not grounded. If you are not sure your lighting system has a grounding means, do not attempt to install this
fixture. Contact a qualified, licensed electrician for information with regards to proper grounding methods as required by the local
electrical code in your area
• If a dimmer control switch is used with this fixture, obtain professional advice to determine the correct type and electrical rating
required.
CAUTION
WARNING
•
Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit
breaker).
• Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface
having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric
shock.
Please read and understand this entire manual before attempting to assemble, operate or install the product.
4
3. Connect the copper wire on the
light fixture to the mounting unit
(AA) by securing it with the
preinstalled ground screw.
3
4. Connect the black to black
(power), the white to white (neutral)
and copper wire to ground wire with
the wire nuts (DD) and secure with
electrical tape (not included). Helpful
Hint: If wires out of the fixture are
the same color, attach the side with
markings or letters to black (positive)
and the other to white (neutral).
1
6
5. Secure the light fixture to the
junction box by placing the canopy
(A) over the support screws (CC) on
the mounting unit (AA) and securing
it with the ball nuts (EE).
1. Screw the support screws (CC)
into the mounting unit (AA).
6. Remove the preinstalled socket
ring, add shade (B) and re-secure
the socket ring.
Install the included 60-watt max. E26
incandescent bulb (FF).
5
  • Page 1 1
  • Page 2 2
  • Page 3 3

Bel Air Lighting 1100 BK User manual

Bel Air Lighting
Brand
Bel Air Lighting
Model
1100 BK
Type
User manual

Bel Air Lighting 1100 BK is a 1 LT PENDANT light fixture that requires a 60-watt max. E26 incandescent bulb. It is designed to be connected to an electrical system that provides a means for equipment grounding. The fixture includes a mounting unit that attaches to a junction box (not included) and a canopy that secures the fixture to the junction box. The fixture also includes a preinstalled socket ring, shade, and ball nuts. The fixture can be used in a variety of indoor settings, such as bedrooms, living rooms, and dining rooms.

Here are some of the features and possible use cases for the Bel Air Lighting 1100 BK:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents