Extreme Tools PWS4124RCTXRD Installation guide

Brand
Extreme Tools
Model
PWS4124RCTXRD
Type
Installation guide

This manual is also suitable for

R
Painted Steel Cabinet Manual
Extreme Tools Inc.
740 Frontenac Road
Naperville, IL 60563
630-369-9303
PWS4124RCTXBK
PWS4124RCTXRD
2
Parts List
Ref # Description Part # Qty
x x x
The keys are taped
to the top of the caster
carton, which is placed
in the bottom drawer
of the cabinet.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 Cabinet Handle 306046 1
2 M6 x 12 Hex Bolt 321051 4
3 Slide Set (1) 300207–300208 2
4 Swivel Caster 302000 2
5 Washer 324002 16
6 M8 x 20 Hex Bolt 321024 16
7 Slide Set (2) 300176–300177 12
8 Drawer Pull 301282 5
9 Drawer Liner 551216 5
10 Drawer Liner 551215 5
11 Drawer Pull 301281 5
12 Rigid Caster 302001 2
13 Lock and Key (1201–1204) 304007 1
14 Drawer Liner 551217 1
15 Drawer Pull 301280 1
16 MDF Work Top 570891 1
17 Drawer 109488 3
18 Drawer 109492 1
19 Drawer 109496 1
20 Drawer 109494 1
21 Drawer 109490 1
22 Drawer 109486 3
23 Drawer 109498 1
2
4
5
6
7
9
10
11
12
13
14
15
16
8
1
17
18
19
20
21
22
23
3
3
Assembly
Handle Installation
NOTE: Assemble the handle rst
to make it easier to move the tool
cabinet.
Simply position the handle over the
holes in the cabinet and attach with
the provided M6 x 12 hex bolts.
Tighten securely.
Caster Installation
NOTE: You may require the
assistance of another person to
complete this step.
Carefully lay the cabinet on its back,
with a soft mat underneath to protect
the nish.
Position the two swivel casters on
the bottom of the cabinet, on the
right side (same side as the handle).
Insert four M8 x 20 hex bolts through
washers, then through each caster
and into the bottom of the cabinet.
Tighten securely.
Repeat for the two rigid casters on
the other side of the cabinet.
4
Operation
Raise and Release Drawer Fronts
This unit is equipped with raise and
release drawer fronts. To open, lift
up on the drawer front while pulling
towards you. To close, shut the
drawer rmly until the latch engages.
If the drawer does not stay closed,
the hook may be bent, or it may be
rubbing against the drawer slides.
To x this problem, lightly bend the
hook until the drawer will engage in
the slide.
Lift
Drawer Removal
Pull the drawer out so that it’s
almost fully extended. Push up on
the black release lever on one side,
while pulling down on the black
release lever on the other side.
While holding the levers in the
positions as instructed above,
pull the drawer outward until it is
released from the drawer slide.
Drawer Replacement
Extend the drawer slides. Insert
the brackets on each side of the
drawer into the slots in the slides,
being careful that they are properly
positioned. Once properly inserted,
completely close the drawer to set
the slides in their proper positions.
Push up (one side)
Push down (other side)
Maintenance
Lubricate the casters once a year with high quality bearing grease.
Lubricate the slides twice a year with a product like WD40 or other quality
lubricant. This is especially necessary as the temperature decreases, which can
cause the bearing to become stiff.
Periodically clean the drawer fronts, drawer trim and other surfaces with mild
detergent and water.
Grease and oil can be removed with most standard cleaning uids. For safety,
use a nonammable cleaning uid.
5 08/16
Safety
WARNING
Do not attempt to lift the unit by its side handles using chains, ropes or lifting
devices, if two people cannot lift the unit. Use a forklift placed under the bottom
of the unit if this situation occurs. The side handle may fail, which may cause
personal injury or damage to the product.
Lock the drawers before moving this product. The drawers could come open
and make the product unstable and tip, which may cause personal injury or
product damage.
DO NOT stand on this product or lean on the drawers or work top.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip, which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This
may cause personal injury or product damage. Mounting this product to any
vehicle in any manner will void warranty.
DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
CAUTION
The maximum weight for each drawer should be no more than 100 lbs.
When moving this product, do not pull it. Push the product to prevent personal
injury.
USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause personal injury or product damage.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip
if stored or moved on an uneven surface, which may cause personal injury or
product damage.
IMPORTANT: DRAWERS MUST BE CLOSED and TOOL BOX MUST BE
LOCKED USING KEY BEFORE MOVING.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Extreme Tools PWS4124RCTXRD Installation guide

Brand
Extreme Tools
Model
PWS4124RCTXRD
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents