Danfoss ABNM A5 Actuator for AB-QM, 0-10V Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Danfoss ABNM A5 Actuator for AB-QM, 0-10V Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ABNM A5 LOG/LIN for AB-QM, 0-10 V Proportional
Fits to AB-QM DN 10-32 (½- inch)
VI.HU.F2.02 | 1© Danfoss | 2017.04
Operating Guide
Danfoss AB-QM VA41
IP54 in any position
with cable plugged in
Click
SUD
Production monitored
Safety tested
S
1. Mounting / demounting
VI.HU.F2.022 | © Danfoss | DHS-SRMT/SI | 2017.04
ABNM A5
Danf
oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order pro
vided that such alterations can be made without subsequential changes being necessary eady agreed.
All trademarks in this material are property of the respec
tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
~0.5 mm
Power on
>3min
Adapter VA41
44.1mm
max 60 mm
(1.73 inch)
(2.35 inch)
8.3 mm
(0.32 inch
ABNM A5 NO & AB-QM ABNM A5 NC & AB-QM
63.5mm
(2.5 inch)
min. 0°C (32°F)
max. 60°C (140°F)
max 61.8 mm
(2.43 inch)
24 V (AC or DC
depending the type)
Rot-Red-Rouge-Rød
Blau-Blue-Bleu-Blå
Schwarz-Black-Noire-Sort
0
0-10 V (DC)
+
~3 mm
Power on
>6 min
~8.3 mm
2. Electrical Connection & Dimensions
5. Auto Calibration
0
6 min
30 min
4. NO/NC version
Q [l/h]
Unlock (NC)
Auto calibration
6 min 30 min
t [min]
Regular operation
NO versions
NC versions
Detection of open/close point
3. Unlock NC version (First Open Function)
Part Name
部件名称
Hazardous Substances Table/有害物质含量表
Pb/ Hg/ Cd/ Cr(VI)/六价 PBB/多溴 PBDE/多溴
Wax element /
石蜡恒温元
X O O O O O
O: Indicates that this hazardous substance contained in all of the homogeneous material for this part is below the limit requirement in GB/T 26572;
O: 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下
X: Indicates that this hazardous substance contained in at least one of the homogeneous material for this part is above the limit requirementw in GB/T 26572;
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
/