Necessories 0108 User manual

Type
User manual

This manual is also suitable for

48.
00
12.00
Optional E-Z Access Spark Screen
• Keep ash and sparks inside
• Hinged for easy access
Optional Cover
• Keep ashes in and debris out
Heavy galvanized steel
• With or without cooking grate slot
Optional Chiseled Fire Ring Cap
• Eight piece
• Smooth top, chiseled edges
• Indiana Limestone colored concrete
Optional Swivel Cooking Grate
• Heavy, steel construction
• Removable
• ADA compliant
Fire Ring Accessories
ROCKWOOD RETAINING WALLS, INC.
NECESSORIES KITS FOR OUTDOOR LIVING
LIMITED WARRANTY
Congratulations on choosing
a “Necessories Kit.” These
superior-quality outdoor
living kits have been
designed to give you years
of enjoyment and comfort.
IMPORTANT NOTICE: Read this entire
Rockwood Retaining Walls, Inc. (“Rockwood”)
Limited Warranty and Limitation of Liability
(“Limited Warranty”). While your Necessories Kit
has been designed for ease of installation, it is
important that it be properly installed and
maintained in order for it to function successfully
throughout the duration of this Limited Warranty.
Your Necessories Kit comes packaged with
assembly instructions. If you cannot locate the
installation instructions, please contact us for
another copy. It is also important for you or your
installer to carefully review all pertinent technical
information, as it is your responsibility or that of
your installer or designer to provide any
appropriate soil testing or soil preparation to
insure a safe and functional application. Please
visit www.rockwoodwalls.com for pertinent
product information and installation guides.
LIMITED WARRANTY FOR NECESSORIES KITS
If you purchased a Necessories Kit and installed it
in the United States, Rockwood warrants your
Necessories Kit is free from defects in materials
for a period of one year from the date we
shipped the kit to the original purchaser. If
Rockwood is given Prompt Notice, as defined in
this Limited Warranty, it will replace the defective
component at no cost to you. Replacement will
consist of shipping the replacement component
to your home or business. You are responsible
for installing the replacement component. Kit
components specifically addressed in the
following paragraph also are subject to this
limited one-year warranty against defects in
materials. In some cases we may not be able to
offer an identical replacement component. In
these cases, we will supply a component of
similar design and function. Natural components
such as stone, block or brick may vary in color
and texture and we cannot guarantee the
replacement will match the color and texture of
your original component.
COMPONENTS OF YOUR NECESSORIES KIT
THAT ARE SUBJECT TO SEPARATE
MANUFACTURER WARRANTIES
Your Necessories Kit consists of a number of
superior-quality components from a number of
our trusted partners and other quality
manufacturers. Depending upon your particular
Necessories Kit, these separately warranted
components may include: (1) pre-cut block, (2)
pavers, bricks and edgers, (3) mantles, tops and
caps, (4) steel wood-burning inserts, chimneys
and access doors, (5) grills, (6) water pumps, (7)
steel spillways, (8) steel rings, cooking grates,
spark screens and ring caps, (9) light kits, gas log
sets, grill covers, cooking grates, and (10) glass
kits and glass block. To the extent these fine
components are covered by separate
manufacturer warranties and we are able to
transfer the applicable warranties to you, we do
so by way of this Limited Warranty. However,
some of the warranties applicable to the
components of your Kit may not be transferable,
and, in which case, if we can make the claim on
your behalf, we will do so if you follow the claim
procedures set forth in this Limited Warranty.
The extent of our obligation under this
paragraph, however, is to make the warranty
claim on your behalf to the extent that we can. It
is up to the component manufacturer to respond
under its warranty.
LIMITATION OF LIABILITY
This limited warranty sets forth the maximum
liability for sale, distribution or use of your
Necessories Kit. IN NO EVENT (INCLUDING
WHERE THIS LIMITED WARRANTY IS DEEMED
NOT TO APPLY TO THE SALE OF PRODUCT IN
QUESTION) SHALL ROCKWOOD OR ANY OF ITS
DISTRIBUTORS BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, OR SPECIAL
DAMAGES RESULTING FROM THE SALE,
INSTALLATION OR USE OF YOUR NECESSORIES
KIT. Some states do not allow the exclusion or
limitation of incidental or consequential damages
for consumers, so the above limitation or
exclusion may not apply to you.
LIMITATION OF WARRANTY
ROCKWOOD MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES FOR MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR OTHERWISE.
DISCLAIMER – WHAT THIS LIMITED
WARRANTY DOES NOT COVER
Rockwood is not responsible for or makes no
warranty as to:
1. Product failure, loss or damage due to:
• Normal wear and tear;
• Damage due to improper handling and
repeated or extended contact with chemicals,
such as deicers;
• Products improperly installed or maintained;
• Acts of God;
• Structural settlement, movement or vibration;
• Products that have not been paid for in full.
2. Minor imperfections
• Minor imperfections that do not affect the
product’s structural integrity;
• Variations in product texture or color.
• Efflorescence;
• Minor imperfections in shape, appearance, or
dimensions covered by ASTM C1372.
CONDITIONS OF WARRANTY – WHAT YOU
MUST DO TO RECOVER UNDER THIS LIMITED
WARRANTY
Prompt Notice of Defect:
Within the warranty period, you must promptly,
and in no case more than sixty (60) days after any
defect of other basis of a claim covered by this
Limited Warranty is discovered or should have
been discovered, notify Rockwood of the defect.
LIMITED WARRANTY CLAIM PROCEDURE
Claims under this Limited Warranty may be made
in writing to Rockwood at 325 Alliance Place N.E.,
Rochester, MN, 55906. Claims should include the
following information:
1. Claimant’s name, address, and phone number
and the installation address (if different);
2. A description of the product, purchase price,
date and location of purchase, and copies of
invoices, if available;
3. A description of the defect(s) (photos are
required); and
4. A brief summary of attempts made to address
the concerns.
NO STATEMENT OF USEFUL LIFE
This Limited Warranty is not a statement of the
useful life of any Rockwood products.
COPYRIGHT NOTICE: The plans and instructions
contained in this kit and the three-dimensional
Grand Fire Ring design constructed from the use
of this kit are protected under the U.S. Copyright
Act. Reproduction of the plans, instructions or
the Grand Fire Ring, either in whole or in part,
and whether in two-dimensional or three-
dimensional form, and the creation of new works
based upon such plans, instructions or Compact
Fire Ring design, without the prior written
permission of Rockwood Retaining Walls, Inc. is
strictly prohibited. The purchase of a genuine kit
from Rockwood Retaining Walls, Inc. or an
authorized Rockwood dealer provides the
purchaser with a limited license to construct a
single Grand Fire Ring. Any reproduction of the
plans and/or instructions, or the construction of
more than a single Grand Fire Ring is a violation
of Rockwood’s copyrights and can result in
severe penalties.
U.S. Copyright Law allows for the recovery of
statutory damages as well as attorneys fees.
Damages for willful infringement can be as high
as $150,000. Further, it is not uncommon for
attorneys fees to exceed the amount of damages
awarded.
325 Alliance Place NE
Rochester, MN 55906
phone: 507.529.2871
toll free: 888.288.4045
fax: 507.529.2879
www.outdoorlivingkits.com
©
2013 Rockwood Retaining Walls, Inc. All Rights Reserved.
Made worldwide under license from Rockwood Retaining
Walls, Inc. US and international patents issued and pending.
T
his information has been prepared for the benefit of
customers interested in Rockwood Retaining Wall products.
It was reviewed carefully prior to publication. Rockwood
a
ssumes no liability for its accuracy or completeness. Final
determination of the suitability of any information or material
f
or the use contemplated, or for its manner of use, is the sole
r
esponsibility of the user. 317
Assembly Instructions
Grand Fire Ring
L
eave these instructions with property owner.
WARNING: Never expose concrete directly to fire. Extreme temperatures may
c
ause concrete to explode, resulting in property damage or bodily injury.
Add
enough sand and gravel fill to bury block and 1" of the steel ring insert.
Step 4
Position steel ring insert and center. Use a rubber mallet to tap blocks towards center
for proper alignment.
Do NOT use adhesive on metal ring.
Getting Started
Zoning and Permits: Before you plan
your project, learn about the necessary
zoning requirements and rules for
e
xcavating and building restrictions in
your area. No matter how small your
project, be sure you obtain the necessary
permits before you start construction.
Know What’s Below: Whether you are
planning to do it yourself or hire a
professional, smart digging means calling
811 before each job. Homeowners often
make risky assumptions about whether
or not they should get their utility lines
marked, but every digging job requires a
call – even small projects like planting
t
rees and shrubs.
Base Preparation: Fire rings can be built
on an existing concrete slab or paver
base without additional preparation.
To build in the ground, follow these
s
teps:
1) To build your fire ring on the ground,
mark a 52" dia. circle and remove all
earthen material to a depth of
approximately 3". Be sure excavated
circle is level.
2) Add 1.5" to 2" inches of compactible
gravel, level it evenly. Compact the gravel
with a hand tamper until it is firmly and
uniformly compacted and level.
3
) Use a thin layer of sand if needed to
adjust for level.
Grand Fire Ring Kit Contents
Item Description Quantity
Fire Ring Block
4" H x 8.5/6" W x 8" D
57
Steel Ring Protective Insert 1
Adhesive 29 oz. Tubes 1
Please note: Use 19 fire ring blocks per course.
WARNING: This product can expose you to chemicals including carbon
monoxide, which is a combustion byproduct known to the State of
California to cause birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
WARNING: Failure to follow all steps of the installation instructions may result in
p
roperty damage or bodily injury. Rockwood Retaining Walls, Inc. is not liable for any
property damage or bodily injury caused by failure to follow the installation instructions
or improper use of the product.
© 2007 - 2017 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
© 2007 - 2017 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2 and 3.
Step 1
Be sure your properly prepared base is level. Begin building by laying your base
course as shown. Using a stiff brush, remove all debris and dust from each block
surface to be glued. Butt blocks tightly together. Use only 19 blocks per course.
IMPORTANT:
Lay adhesive bead away from
outside perimeter to prevent
adhesive from squeezing out
between courses.
Use adhesive on each course.
Brush excessive dust from
blocks to be glued.
Steps 2 - 3
Continue to build each course as shown.
Stagger second course, use adhesive on
each block.
Compacted gravel base
Adhesive
S
and and gravel fill
ATTENTION: The cooking grate must be
seasoned before cooking food directly on
the surface.
Expose the grate to an open flame until
the enamel finish is completely removed.
If you wish to cook on the grate before
it is seasoned, place aluminum foil
between the grate and your food item.
Pans, skillets or meat baskets can also
be used to keep the food from touching
the grate.
When the grate is completely seasoned it
should be heated and thoroughly cleaned
with a wire brush before placing food
items on it.
Brush vegetable oil on the grate to keep
meat from sticking. After each use, brush
vegetable oil on the grate to keep grate
seasoned. Do not use aerosol spray oils
around an open flame.
Optional Cooking Grate Assembly
Connect bracket (A) to ring as shown. Position grate (B) above bracket and secure with
post (C). Screw on handle and secure with nut (D). For anti-theft feature, secure pin
with bolt (E).
B
C
D
A
E
I
MPORTANT:
Allow 72 hrs. for adhesive
to set before use.
Note: All warranty claims must be made online at: www.outdoorlivingkits.com/warranty.htm
Claims submissions must include the following information:
1. Claimant’s name, address, and phone number and the installation address (if different).
2. A description of the product, purchase price, date and location of purchase, and copies of
invoices, if available.
3. A description of the defect(s), photos are required.
4. A brief summary of attempts made to address the concerns.
Install Optional Cap:
Rough-fit cap blocks without the steel
ring insert. Place the steel insert in
position and adjust cap blocks for
proper fit. Remove insert and lift each
cap block to secure with adhesive.
Replace steel ring insert. Proceed to
Final Step.
Final Step
IMPORTANT: To protect all concrete from extreme heat, fill interior of Fire Ring with
enough gravel/sand to bury a minimum of 1" of the steel insert.
  • Page 1 1
  • Page 2 2

Necessories 0108 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI