2. Connector Products (CPI)
  3. New Bolt Replacement

Connector Products (CPI) New Bolt Replacement Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Connector Products (CPI) New Bolt Replacement Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BULLETIN # 002
Pre-Install Check List
Compatible replacement bolt for assembly?
Make sure connector is clean and free of
damage.
Gather necessary tooling
-Small flat head screwdriver
-Needle nose pliers
1) Insert screwdriver blade under the snap ring and use a
twisting motion to pry it out.
2) Fully remove existing shear bolt.
3) Make sure threads are clean and install a new shear bolt.
4) Align the new snap ring into the existing slot on the
shear bolt. 5) Squeeze snap ring into the slot until it is securely
fastened.
New Bolt Replacement
INSTALLATION INSTRUCTIONS
/