MIMAKI FineCut for Illustrator Reference guide

MIMAKI ENGINEERING CO., LTD.

Reference Guide

Plug-in Cutting / Coating Software

D203448-26

Cut / Coat Simply and Directly

ii

Foreword ......................................................................... vi

Note .................................................................................vi

New Functions of FineCut/Coat9 .....................................vii

System Requirement ......................................................viii

System and software ..................................................... viii

How to Read This Manual ............................................... ix

CHAPTER 1 Preparation

Setting of Plotter ............................................................1-2

Installation of FineCut/Coat ...........................................1-3

For Windows ................................................................. 1-3

For Macintosh ............................................................... 1-6

Online Information .........................................................1-8

Connecting to the Plotter ...............................................1-9

Entering the Serial Key ................................................1-10

Upgrading from a Previous Version .............................1-11

Issue a serial key. ....................................................... 1-11

CHAPTER 2 Basic Cutting

Basic Cutting .................................................................2-2

Basic Cutting ................................................................ 2-2

Fill and Stroke of an Object .......................................... 2-5

CHAPTER 3 Creating Register Marks

Work Flow ......................................................................3-2

Making a Frame (Cutting Line) ......................................3-4

Making Register Marks ..................................................3-6

Register Marks ............................................................. 3-6

CG, CJV30, TPC, CJV300/150, CJV300 Plus, CJV330, UC-

JV300/150, UCJV330 series ........................................ 3-8

CF2, DC, CF3 series .................................................. 3-10

CFL-605RT ................................................................. 3-12

CF22-1225 ................................................................. 3-15

Trotec Speedy Series, Gravotech LS series, DCF-

605PU(Digital coating machine) ................................. 3-18

Cutting an Object .........................................................3-20

CG-EX series .............................................................. 3-20

CG-FX, CG-FXII, CG-FXII Plus, CG-75ML, CG-60SR, CG-

100SRII, CG-SRIII, CG-AR, CJV30, TPC, CJV300/150,

CJV300 Plus, CJV330, UCJV300/150, UCJV330 series 3-

21

CF2, DC, CF3 series .................................................. 3-31

TABLE OF CONTENTS

iii

CFL-605RT .................................................................3-39

CF22-1225 ..................................................................3-55

Trotec Speedy Series .................................................3-61

Gravotech LS series ...................................................3-61

DCF-605U MkII (Digital coating machine) ..................3-61

CHAPTER 4 Advanced operations-from FineCut Menu

Recognizing Stroke Weight and Overlap ...................... 4-2

Trapping ........................................................................ 4-3

Joining Paths ................................................................ 4-4

Making a Precut Line around an Object ........................ 4-5

Creating Shadow / Edge ............................................... 4-6

Importing / Outputting Plot File ..................................... 4-8

Importing a plot file .......................................................4-8

Outputting a plot file ......................................................4-9

Extracting the Outline .................................................. 4-10

Trace simply ...............................................................4-10

Trace with detail setting ..............................................4-11

Outputting to RasterLink ............................................. 4-12

How to set cutting paths .............................................4-15

Outputting to the Trotec laser engraving machines .... 4-17

Output cutting data directly from FineCut to the laser en-

graving machine. ........................................................4-18

Create register marks in FineCut, then perform printing and

cutting. ........................................................................4-20

Outputting to a Gravotech laser engraving machine ... 4-23

Outputting cut data from FineCut. ...............................4-25

Create register marks in FineCut, then perform printing and

cutting. ........................................................................4-27

Outputting to a DCF-605PU (Digital coating machine) 4-30

Setting Output Condition ............................................. 4-38

Separating and Cutting Lines (CFL-605RT/CF/DC/CF2/CF3

(except M-Head) series, CF22-1225) ......................... 4-40

Cutting with the line separated ...................................4-40

The blade shapes and the setting of line separation ..4-43

CHAPTER 5 Advanced operations-from Plot Screen

Scaling an Object .......................................................... 5-2

Scaling an object with a fixed aspect ratio ....................5-2

Scaling only width or length of an object ......................5-3

Cutting an Object Multiple Times (Copy) ..................... 5-4

Dividing and Cutting an Object (Tiling) ......................... 5-6

Positioning Mark ........................................................... 5-8

iv

Center mark .................................................................. 5-8

Corner mark .................................................................. 5-8

Cutting an Object on Each Color ...................................5-9

Cutting an Object on Each Layer .................................5-11

Setting the Output Order/Tool on Each Color/Layer ....5-13

Setting Output Condition on Each Color/Layer ............5-15

Making Effective Use of Sheet ....................................5-17

Setting Connection to the Plotter .................................5-19

Link Cut and Print (ID cut) ...........................................5-20

Preparation ................................................................. 5-21

Check ......................................................................... 5-22

Create data ................................................................. 5-22

ID Cut Procedure ........................................................ 5-24

Setting Head Position after Plotting .............................5-28

Creasing & Cutting (CG-AR series) .............................5-30

X-Direction Division Cutting (CG-AR series) ...............5-32

Double Pass Creasing (CG-AR series) .......................5-35

Checking the Cutting Process by Preview ...................5-36

CHAPTER 6 Advanced operations-others

Editting the Line .............................................................6-2

Setting Cutting Start Position .........................................6-4

Specifying the Cut Direction ..........................................6-6

Registering Favorite ......................................................6-8

Registering output conditions for “Favorite” .................. 6-8

Registering a tool as a “Favorite” ................................. 6-9

Changing registered contents of a “Favorite” ............. 6-10

Applying “Favorite” when cutting ................................ 6-11

Cutting with CF3 series (M-Head) ...............................6-12

CHAPTER 7 Description of Functions

FineCut/Coat Menu .......................................................7-2

How to display FineCut/Coat menu .............................. 7-2

Menu ............................................................................ 7-3

[Plotter/User Setup] Screen ...........................................7-4

Plotter ........................................................................... 7-4

Output Condition Setup ................................................ 7-5

Communication ........................................................... 7-16

Machine Setup ........................................................... 7-17

Plot Dialog .................................................................. 7-19

Alert Display ............................................................... 7-20

Other .......................................................................... 7-21

[Plot] Screen ................................................................7-22

v

[Plot Out] Screen ......................................................... 7-32

[Outline Extraction] Screen ......................................... 7-38

Trace simply ...............................................................7-38

Trace with detail setting ..............................................7-39

[Output to RasterLink] Screen ..................................... 7-41

[Output to TrotecLaser] Screen ................................... 7-44

[About FineCut/Coat] Screen ...................................... 7-46

[Line Edit Tool] Screen ................................................ 7-47

Setting Cutting Start Position ...................................... 7-50

[Online Information] Screen ........................................ 7-51

Uninstallation of FineCut/Coat .................................... 7-52

For Windows ...............................................................7-52

For Macintosh .............................................................7-52

CHAPTER 8 Troubleshooting

Troubleshooting ............................................................ 8-2

Memory runs out ...........................................................8-2

A double cut line will be created when [Align Stroke] is set

to other than center in Illustrator ...................................8-2

Invalid path created in the object when creating an edge 8-

2

A shadow or an edge cannot be deleted ......................8-3

The inside path is not cut when cutting the path that is

applied “Effect” of Illustrator with CF3 series (M-Head) 8-3

An error occurs during outputting to RasterLink ...........8-3

No [Specify Cutting Start Position], [Specify Cutting

Direction], or [LineEdit] in the Illustrator toolbar. ...........8-4

Printing data is not correctly sent to RasterLink when ID cut

outputting in PDF format ...............................................8-5

Cutting and printing are misaligned when ID cut outputting

the data including image ...............................................8-5

Illustrator aborts when clicking on the color/layer list in the

[Plot] screen ..................................................................8-6

LAN connection fails in “CJV300 Plus series”, “CJV330

series”, “UCJV300 / 150 series” or “UCJV330 series” ..8-6

Error Messages ............................................................. 8-7

vi

Foreword

Thank you very much for purchasing a product of MIMAKI.

FineCut/Coat, a plug-in software for AdobeIllustrator, offers simple operation and stable cutting or coating

environment which has never been realized by other cutting or coating software.

Note

• It is strictly prohibited to write or copy a part or whole of this document without our approval.

• This document has been carefully prepared for your easy understanding, however, please do not

hesitate to contact a distributor in your district or our office if you have any inquiry.

• Description contained in this document are subject to change without notice for improvement.

• It is strictly prohibited to copy the Mimaki Engineering software described in this document to other disk

(excluding the case for making backup) or to load on the memory for the purpose other than executing

it.

• Due to improvement or change of software, the description of this document could be partially different

in specification, for which your understanding is requested.

• With the exception of what is provided for in the warranty provisions of MIMAKI ENGINEERING CO.,

LTD., we do not assume any liability against the damages (including but not limited to the loss of profit,

indirect damage, special damage or other monetary damages) arisen out of the use or failure to use of

this product. The same shall also apply to the case even if MIMAKI ENGINEERING CO., LTD. had

been notified of the possibility of arising damages in advance. As an example, we shall not be liable for

any loss of the media made using this product or indirect damages caused by the product made using

this media.

• You can also download the latest operation manual from our website.

RasterLink are the trademarks or registered trademarks of MIMAKI ENGINEERING CO., LTD. in Japan and in other countries.

Adobe, Illustrator are the trademarks or registered trademarks of Adobe Incorporated in the United States and other countries.

Trotec is a trademark or registered trademark of TROTEC GmbH & Co. KG..

Gravotech is a trademark or registered trademark of of the Gravotech Group.

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation of the United States and other countries.

Apple and Macintosh are trademarks or registered trademarks of Apple Inc. of the United States and other countries.

Other company and product names mentioned herein are the trademarks or registered trademarks of the respective companies in Japan and in

other countries.

vii

New Functions of FineCut/Coat9

Direct output from FineCut to a laser engraving machines (Trotec Speedy Series,

Gravotech LS Series). ( P.4-17, P.4-23)

You can output the cutting data from FineCut to the Trotec Speedy Series or the Gravotech LS Series

and then perform laser cutting. The compatible models are as follows. (Gravotech LS series only works

on Windows)

• Trotec Speedy Series: laser engraving machines 100/ 300/ 360/ 400

• Gravotech LS Series: LS100IQ, LS100Ex, LS100Ex_Energy, LS900, LS900XP, LS900Energy, LS900Edge,

LS1000XP, LS_Energy8

Automatic register mark detection using a camera with the laser engraving machine,

Gravotech LS series.( P.4-24)

With the Gravotech LS series, you can automatically detect register marks using a camera. (Gravotech

LS series only works on Windows)

Supports digital coating machines (DCF-605PU).( P.4-30)

Allows coating to be applied using a digital coating machine in accordance with the coating data configu-

ration.

viii

System Requirement

System and software

The following conditions are required to use FineCut/Coat9.

Item Windows Macintosh

Computer IBM PC or compatible mounting Pentium proces-

sor or compatible CPU

Macintosh equipped

with an Intel CPU or

Apple M1 chip

OS Microsoft Windows10

Microsoft Windows11

Mac OS X 10.9 to

10.11

macOS 10.12 to 13

Monitor 1024 x 768 pixels, or higher resolution is required

Software Adobe®Illustrator® CC2015, CC2015.3, CC2017, CC2018, CC2019,

2020, 2021*1 , 2022*1, 2023*1

*1. Windows Server is supported by Illustrator 2021, 2022 and 2023, but not by FineCut/Coat9.

Plotter

MIMAKI product

MIMAKI CG series (CG-45 or later), MIMAKI CF series, MIMAKI CF2

series, MIMAKI DC series, MIMAKI CF3 series

, MIMAKI CFL-605RT,

MIMAKI CF22-1225

, MIMAKI CFX series, MIMAKI TPC, MIMAKI CJV30

series

, MIMAKI CJV300/150 series

,

MIMAKI CJV300 Plus series,

MIMAKI CJV330 series, MIMAKI UCJV300/150 series, MIMAKI

UCJV330 series

Others

Trotec Speedy Series (100/300/360/400)

Gravotech LS Series:

LS100IQ, LS100Ex, LS100Ex_Energy, LS900,

LS900XP, LS900Energy, LS900Edge,

LS1000XP, LS_Energy8

• This only works with Microsoft® Windows®.

Not available

Digital

coating

machine

MIMAKI product DCF-605PU

Online Information function As described in “OS” above

Connection

MIMAKI product

Cutting Plotter

Serial connection (crossing cable) or USB connection or LAN connec-

tion

Others

laser engraving

machines

Trotec Speedy Series: USB connection (virtual COM port)

• It is necessary to install virtual COM port driver.

Gravotech LS Series: USB connection

• It is necessary to install the Gravotech L-Solution driver.

• When performing register mark detection with the cam-

era:

A USB connection for the camera is required separately

from the USB connection for data.

Camera driver installation is required.

• This only works with Microsoft® Windows®.

Not available

MIMAKI product

Digital coating

machine

LAN connection*2

*2. When using a LAN connection in a Macintosh environment, be sure to turn off the Wi-Fi setting.

Others Compliant with the operation environment of Adobe®Illustrator® used

•If MIMAKI plotters are used, a USB serial adapter is required for output from a USB port to a serial port.

(USB-serial adapter (Option: OPT-SS036) is recommended)

Some USB-serial adapter may not operate normally because of a problem between the adapter

and the operating system of the computer. Before using other manufacturer’s adapter, contact the

manufacturer for problems between the adapter and OS in use.

ix

How to Read This Manual

Notations

Menu items and buttons displayed in each screen are enclosed in square brackets like [File] menu.

Symbols

FineCut/Coat menu

FineCut/Coat tool menu is displayed as follows on Illustrator.

If “DCF-605PU (Digital coating machine)” is selected, [FineCoat] is displayed, and if anything else is selected,

[FineCut] is displayed.

In this manual, it is called “FineCut menu” or “FineCoat menu”.

About DCF-605PU (digital coating machine)

If using the DCF-605PU (digital coating machine), read “FineCut” as “FineCoat”, “Cut” as “Coat”, and “Plotter” as

“Digital coating machine” as necessary when reading these instructions.

• Indicates cautions or procedures you must perform.

• Describes useful information.

• Indicates a page of related contents for reference.

FineCut menu FineCoat menu

x

This chapter describes how to set the plotter, install FineCut/Coat,

and set the connection to the plotter.

Before using FineCutCoat, work in the order described in this

chapter.

Setting of Plotter...................................................... 1-2

Installation of FineCut/Coat ..................................... 1-3

For Windows .............................................................. 1-3

For Macintosh ............................................................ 1-6

Online Information ................................................... 1-8

Connecting to the Plotter......................................... 1-9

Entering the Serial Key.......................................... 1-10

Upgrading from a Previous Version....................... 1-11

Issue a serial key. .................................................... 1-11

CHAPTER 1

Preparation

1-2

Setting of Plotter

Before using FineCut/Coat, set the plotter used as described below.

Plotter Item Setting

CG-EX Series ORIGIN SELECT LOW RIGHT

CG-FX Series,

CG-FXII Series,

CG-FXII Plus

Series,

CG-75ML,

CG-60SR,

CG-SRII,

CG-SRIII Series,

CG-AR Series

ORIGIN SELECT LOW RIGHT

Register Mark Setting

MARK DETECT 1 Pt

DIST REVI OFF

offset A 0.0mm

offset B 0.0mm

COPIES A (↑ ) 1 (sheet)

COPIES B ( ←) 1 (sheet)

ROTATION OFF

PRIORITY HOST

CJV30 Series,

TPC,

CJV300/CJV150

Series,

CJV300 Plus

series,

CJV330 series,

UCJV300/UCJV150

UCJV330

Series

• Set all for each tool.

Register Mark Setting

MARK DETECT 1 Pt

OFFSET Y (← )0.0mm

OFFSET X (↑ ) 0.0mm

COPIES Y (←) 1 (sheet)

COPIES X (↑) 1 (sheet)

CF Series CMD SW Enable

ORIGIN LOW-LEFT

CIRCLE θ CORRECTION Enter an angle of positive number

CF2 Series,

DC Series,

CF3 Series,

CFL-605RT,

CF22-1225

CMD SW Enable

ORIGIN LOW-LEFT

(LOW-RIGHT for CF3)

CIRCLE θ CORRECTION Enter an angle of positive number

EXPAND OFF

MARK DETECT

• Register mark detection cannot be set unless the

expand is set to OFF.

1 Pt

<MULTI-PASS>-CUT START OFF

1-3

1

Preparation

Installation of FineCut/Coat

Obtain FineCut/Coat9 by downloading it from the official MIMAKI website, then install it.

For Windows

1Download FineCut/Coat9 from the official MIMAKI website (https://

mimaki.com/).

• The product to use varies depending on your operating system.

Use [Select OS] to select your operating system, then download FineCut/Coat9 for

your OS.

2Double-click the downloaded file.

• The file is expanded and the FineCut/Coat9 installer menu is launched.

• If you close the FineCut/Coat9 installer

menu.

(1) Open the "FineCut_Coat 9 **" folder on the desktop.

(2) Double-click “CDMenu.exe” to launch it.

3Click the "FineCut/Coat9 for Illustrator

Setup" button that matches your Illustra-

tor.

• Installation has begun.

4Click [Next].

5Check the Software License Agreement.

• Read through the agreement, click [I accept

the terms in the license agreement] to con-

sent the agreement, and click [Next].

1-4

6Check the Illustrator to be installed on,

and click [Next].

• Uncheck the Illustrator not to be installed

on.

• If the Illustrator used does not appear on the

list, click [Manual setting] and select a plug-

in folder of the Illustrator.

7Click [Install].

• Installation starts.

8If USB driver does not exist, a screen

shown on the right appears.

Click [Yes].

• If USB driver exists, go to the step 15.

9Click [Next].

• Select the language to be used for installa-

tion, and click [OK].

10 Click [Next].

11 Check the Software License Agreement.

• Read through the agreement, click [I accept

the terms in the license agreement] to con-

sent the agreement, and click [Next].

1-5

Installation of FineCut/Coat

1

Preparation

12 Click [Install].

• Installation starts.

13 Click [OK].

• Connect the plotter.

14 Click [Finish].

15 Click [Finish].

• Installation is complete.

Next, go to "Online Information". ( P.1-8)

1-6

For Macintosh

1Download the FineCut/Coat9 disk image from the official MIMAKI

website (https://mimaki.com/).

The product to use varies depending on your operating system.

Use [Select OS] to select your operating system, then download FineCut/Coat9 for your OS.

2Mount the disk image.

3Double-click [FineCut_Coat9 AI

Installer.pkg].

Installation has begun.

4Click [Continue].

5Check the software license agreement.

• Read through the agreement, and click

[Continue] to consent the agreement.

• In case of macOS 10.14, when you click

[Print...], the print preview and the print

result may be blank. Follow the steps below

to change [Appearance].

(1) Click [System Preferences] on the Apple menu.

(2) Click [General]

(3) Set [Appearance] to [Light].

6When you agree “Software license agree-

ment”, click [Agree].

1-7

Installation of FineCut/Coat

1

Preparation

7Click [Install].

• When you change the install location, click

[Change Install location…] and select the

install location.

8Select the Illustrator version to install and

click [OK].

• Click the button to start installation.

9Click [Close] .

• Installation is complete.

Next, go to "Online Information". ( P.1-8)

1-8

Online Information

If a new information about FineCut/Coat is found, the following screen appears when a new document is created

first or a document is opened first.

Click necessary items and check the information. ( P.7-51 for details)

Next, go to "Connecting to the Plotter". ( P.1-9)

1-9

1

Preparation

Connecting to the Plotter

Before outputting data to the plotter, set the plotter on FineCut/Coat.

1When creating or opening a docu-

ment first after installing FineCut/

Coat, the screen shown on the right

appears. Click [Setup].

2Select the plotter used.

• Select the plotter used on [Model].

• Set the other items as needed. ( P. 7 - 4 )

3Click [Communication] tab and select

the port of the plotter.

• After selecting the port, click [Connection

test] to check the plotter is correctly con-

nected. ( P.7-16 for details)

4Click [OK] to save the setting.

Next, go to "Entering the Serial Key".( P.1-10)

Set the same values for Plotter and Communication as the settings on the plotter.

If the entered values differ from the settings on the plotter, objects will not be cut normally.

1-10

Entering the Serial Key

After FineCut/Coat is installed, a serial key input screen is displayed the first time you execute a FineCut/Coat

function.

1Enter the serial key, which is on the

FineCut/Coat9 package, then click [OK].

• The serial key is on an adhesive label on the inside of

the box lid.

•When updating from a previous version of FineCut, enter the serial key issued by the FineCut9

Serial Key Issuance Tool.( P.1-11 "Upgrading from a Previous Version")

• To use the software in trial mode, select [Trial] and click [OK].

The software can be used in trial mode for up to 60 days.

Preparation is now complete.

The serial key is required again if the software is reinstalled or updated. Keep it in a safe place to avoid

losing it.

Serial key

Page is loading ...

MIMAKI FineCut for Illustrator Reference guide

This manual is also suitable for

MIMAKI FineCut for Illustrator Reference guide

Related papers

Other documents