TEAMSable APT-50 Quick start guide

Type
Quick start guide
TEAMSable APT-50
Handheld
Payment Terminal
Quick Start Guide
TEAMSable Inc. APT-50-2017-
06 1
Introduction
Dear User,
Thank you for purchasing our product. Please read the instruction manual carefully in assistance with usage.
We alwaystry our best to make sure this manual is complete and accurate; however,we cannot ensure that
there are no errors or omissions. We do not assume responsibility for product damage or loss of data due to
improper handling of the device.
We will update this manual if any improvement without notice. The trademarks and trade names mentioned
in this manual belongs to their respective companies and/or organizations.
Disclaimer:
We do not recommend that you use any cleaners containing ammonia or alcohol to clean the LCD
screen or plastic housing.Cleaners containing these contents will cause damage on theLCD screen,
which TEAMSable will not be responsible for.
Precautions
Before operation of the device, please read this for informational purposes. For further details, please
refer to the safety instructions and announcement.
Please don’t disassemble the device and it’s related. Only authorized agents or technicians has
access to service the device.
Never use the POS in environments that may be humid to avoid fire or electric shock.
Do not use headphones at a high volume; otherwise it may damage your hearing abilities.
This POS is not waterproof. Do not immerse the equipment in water (dripping environment)or
other objects filled with liquids, such as vases.
Do not place the product in a heated environment, heating equipment or direct sunlight.
Do not place this product on an unstable stand or table, it may cause unnecessary damage and.
or personal injury if it tips over.
Do not place heavy or sharp objects on the LCD screen or on the device.
Please use the standard power adapter.We are not responsible for damagesto your device
caused by usage from another power adapter.
When connecting the power cord, make sure that nothing rests on the power cord,and the
location where the power cord will not be stepped on or cause stumble.
Please unplug the power cord if not using the POS for a extended amount oftime.
There may be explosion if battery is incorrectly installed.
Please replace only with the same type or equivalent type of battery.
The battery must not be exposed under sunlight, fire or under a heated environment.
TEAMSable Inc. APT-50-2017-
06 2
The TEAMSable APT-50 Payment Terminal is a 5.5”
handheld device thats perfect for retail as well as
the hospitality industry. The APT-50 comes
standard with an 5.5” Capacitive Touch screen and
other high end features such as a built in credit
card/ smart card reader, high speed thermal
printer, and onboard Bluetooth and WiFi radios just
to name a few and also comes with a charging
dock.
Whats In the Box?
APT-50 Payment Terminal
Battery for APT-50
Charging Dock
Thermal Paper Roll
USB Charging Cable/
Wall Adapter
TEAMSable Inc. APT-50-2017-
06 4
What Can I do on the APT-50
Connect Wirelessly and Securely
Accepts Swipe Payments
Accepts Chip Payments
Accepts NFC/ Touch Payments
Ports
Power Button
Micro USB Port
3.5mm Audio Jack
Chip Reader Slot
Card Swipe Slot
NFC / Touch Payment
Capable
SIM Slot
MicroSD Slot
SAM Slot x2
TEAMSable Inc. APT-50-2017-
06 5
Get Started
Loading the Thermal Roll
1.
2. Lift the Printers cover to open.
Load a roll of paper into the printer.
(2 ¼ width)
Thermal print Side will face the
operator.
Close cover and tear off excess paper.
3.
4.
TEAMSable Inc. APT-50-2017-
06 6
Connectivity
TEAMSable Inc. APT-50-2017-
06 7
Connect to Wifi:
1. Go to Settings
2. Tap WLAN
3. Select the Wireless
Network to be
connected to
4. Enter PW and connect
Connect to
Bluetooth:
1. Go to Settings
2. Tap Bluetooth
3. Select the BT Device to
be connected to
4. Enter PW and connect
TEAMSable Inc. APT-50-2017-
06 7
Charging the APT-50
There are 2 ways to charge the APT-50.
1. Plug the Micro USB Cable to the bottom of the
charging dock, and either charge thru a USB Port
or by using the Wall Adapter.
2. Plug the Micro USB Cable directly to the Micro
USB Port on the APT-50, and either charge thru a
USB Port or by using the Wall Adapter.
TEAMSable Inc. APT-50-2017-
06 7
Operation
1. For MSR: Magstripe
facing down is the
correct method
2. For Smart Card:
Chip facing Up is the
correct method
3. For NFC/ Touch
Payment: Contact
should be made within
40mm.
TEAMSable Inc. APT-50-2017-
06 4
Specs
TEAMSable Inc. APT-50-2017-
06 4
TEAMSable Inc. APT-50-2017-
06 4
Before cleaning the machine,make sure that the machine is
turned off.
Do not directly spray cleaning fluids on the LCD screen or
plastic case.
Please use a clean, soft, lint-free cloth to clean the LCD screen.
If it is difficult to remove dirt, use a clean, soft, lint-free cloth
and please wipe the screen with alcohol-free ammonia-based
cleaner.
Please use a soft, dry cloth to clean the plastic case. If the dirt is
difficult to remove, pair with a little ammonia-free non-
alcoholic ingredients.
Maintenance
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

TEAMSable APT-50 Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI