Inter-m IMN-512 Operating instructions

Brand: Inter-m

Model: IMN-512

Category: Security cameras

Type: Operating instructions

IMN-511/512

High Resolution IP Camera

Operation

Manual

* Before starting use of this product, be sure to check the broadcasting

mechanism and the power voltage.

IMN-511/512 O/P Manual

Although it is neither complicated to install nor difficult to operate your

set, a few minutes of your time is required to read this manual for a

properly wired installation and becoming familiar with its many

features and how to use them. Please take a great care in unpacking

your set and do not discard the carton and other packing materials.

They may be needed when moving your set and are required if it

ever becomes necessary to return your set for service.

Never place the unit near radiators, in front of heating vents, in

excessively humid or dusty location to avoid early damage and for

your years of quality use. Connect your complementary components

as illustrated in the following page.

Auto Iris Plug S/W & Manual CD

IMN-511/512(HIGH RESOLUTION IP CAMERA)

Overview ............................................................................2

Features..............................................................................3

Precautions........................................................................5

Part Names and Function.................................................8

Rear Names and Function..............................................10

Installing IMN-511/512.....................................................13

1. Lens Mounting and Connection .................................13

2. Lens Adjustment.........................................................18

3. Connecting a Monitor .................................................22

4. Connection method for MIC and Speaker..................24

5. Connecting a network.................................................24

6. Connecting Sensor In/Out ..........................................25

7. Connecting PAN/TILT ................................................26

Setting IP Address ..........................................................27

Camera Setup ..................................................................32

Specifications..................................................................35

Trouble Shooting ............................................................37

2IMN-511/512(HIGH RESOLUTION IP CAMERA)

IMN-511/512(series) is 540 High Resolution DAY & NIGHT

Network Camera adopting SONY CCD with 410,000 pixels of

high picture quality, which is a color camera realizing 0.01Lux

with lowest light intensity.

It supports high quality MPEG-4, connected with Ethernet or

xDSL/Cable modem at the speed of 30 frames/sec.

The transmitted image can be monitored from any place with a

computer having Microsoft Internet Explorer installed.

It offers users access to high quality video and audio from any

workstation on the LAN/WAN. The Network Camera is ideal for

surveillance applications that require high quality, full motion

video and audio, as well as comparatively low bandwidth

demands on the network. Also, this system provides remote

users in the Internet with alarm processing function and remote

control on PAN/TILT/ZOOM/FOCUS.

The built-in Web server provides its own application page for

direct viewing of the network camera, as well as full web-based

control of the management and configuration functions. All of

this can be accessed from a browser over the network.

IMN-511/512(HIGH RESOLUTION IP CAMERA)

Video

- Adopts 1/3” 410,000 pixel high fidelity SONY CCD

- 540TV LINES Horizontal resolution(Color), 570TV

LINES(B/W)

- Minimum 0.01Lux by transmission of IR-CUT Filter(F1.2)

- Day & Night(IR CUT FILTER) Function

- High-speed automatic shutter(ELC) function

- Back Light Compensation(BLC

- Flickerless function

- Auto gain Control(AGC) function

- Supports mounting of DC/VIDEO iris lens

- Possible to install C/CS Mount lens

Video Compression

- High Resolution live video up to 30fps

- Compression: MPEG4, MJPEG selectable

- Resolution: D1, VGA, QVGA, 4CIF, CIF, QCIF

- Bandwidth Utilization Control by user

- BitRate : 0.256 ~ 4Mbps per Client

Video out

- One Composite Loop-out (75ΩAuto-termination)

Video Motion Detection

- Streamer Based motion detection

- 20*15 cell

- 0 ~ 100 Sensitivity Resolution

Networking

- ARP, ICMP, TCP/IP, UDP/IP, RTP/RTSP, HTTP server,

FTP Server, SMTP client, TIME client, FTP client, DHCP

client

- 10/100 Base-T Fast Ethernet (Auto Negotiation)

4IMN-511/512(HIGH RESOLUTION IP CAMERA)

Security

- IP Address Filtering

- Multi-level password protection

Audio Compression

- Linear PCM 8KHz, 16bit Mono

- Bi-directional Audio

Audio In/out

- External Microphone

- Speaker output

Connections & Connectors

- 485 Transceiver

- 1 Sensor Input (normal open/normal close selectable)

- 1 Relay Output

Power

- Power Source - 12VDC Adapter

- Power consumption 7.2Watt@12VDC for IMN-511

8.4Watt@12VDC for IMN-512

IMN-511/512(HIGH RESOLUTION IP CAMERA)

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operation and maintenance (servicing) instructions

in the literature accompanying the appliance.

Caution: These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not any

perform any servicing other than that contained in the operating

instructions unless you are qualified to do so.

Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche

polarisée avec un prolongateur, une prise de courant on une

autre sortie de courant, sauf si les lames peuvent étre

insérées à fond sans en laisser aucune partie à découvert.

6IMN-511/512(HIGH RESOLUTION IP CAMERA)



DO NOT ATTEMPT TO INSTALL THE

PRODUCT YOURSELF.

WHEN SMOKE OR ABNORMAL HEAT

EMISSION IS DETECTED, STOP USING THE

CAMERA.

It can result in fire. In this case, stop

using the camera and refer servicing

to a local agency or the Customer

Service Department in the

headquarters.

This product must be installed by qualified

personnel. Trying to install the product yourself

can cause a risk of fire or electric shock.

Thus, the user should

consult with a nearby

agency for

proper permitting.

DO NOT INSTALL THE PRODUCT IN DUSTY

OR DAMP PLACES WITH POOR

VENTILATION OR PLACES WITH OIL OR

GAS.

DO NOT PLACE THE PRODUCT IN

UNSTABLE PLACES WITH VIBRATION OR

ON A SLANTED SURFACE OR IN PLACES

WITHOUT SECURE MOUNTINGS.

The product must be

securely fastened to

avoid mounting failure

that can inflict damage

to the product and even

jeopardize a person’s

life.

It will cause the abnormal

operation of the product or

result in a risk of electric

shock or fire.

DO NOT GRASP OR PULL THE POWER

CORD OR PLUG WITH WET HANDS.

DO NOT DISSEMBLE THE PRODUCT OR

INSERT UNDESIRED FOREIGN

SUBSTANCES.

When the cord or plug is

damaged or frayed, it can

cause fire or electric shock.

It will result in the abnormal

operation of the product and fire.

This sign is provided to alert the user to the presence of possible

hazards that could cause serious injury or even death.



This sign is intended to alert the user to the presence of possible

hazards that could cause personal injury or property damage.



IMN-511/512(HIGH RESOLUTION IP CAMERA)

DO NOT INSTALL THE CAMERA IN EXTREME

TEMPERATURE CONDITION

DO NOT INSTALL THE CAMERA UNDER

UNSTABLE LIGHTING CONDITION

Unstable lighting can

cause the camera to work

improperly. If the

camera is exposed to

spotlight or object

reflecting strong light,

smear or blooming

may occur.

Do not use the camera under

condition where temperature

is over -10°C to 50°C.

Especially be careful for

ventilation

under high

temperature.

DO NOT DROP OR SHAKE THE CAMERA DO NOT INSTALL THE CAMERA FACE UNDER

STRONG LIGHTING CONDITION

It can cause

malfunction of CCD.

It can cause malfunction.

DO NOT TOUCH THE LENS DO NOT INSTALL THE CAMERA UNDER WET

OR RAIN

It can cause the image

quality to be poor.

If it gets wet, it can cause the

camera out of order.

DO NOT INSTALL THE CAMERA CLOSELY AT

THE MAGNETIC

DO USE A DRY CLOTH TO CLEAN THE

CAMERA

It can cause malfunction. To sweep the camera, use a dry

and soft cloth.

* Please check that the power satisfies the normal specification before

connecting the camera.

This sign indicates practices considered ‘unacceptable’ during use of the product.

This sign illustrates mandated practices during use of the product.



8IMN-511/512(HIGH RESOLUTION IP CAMERA)

IMN-511/512(HIGH RESOLUTION IP CAMERA)

11. FLANGE BACK ADJUST RING

When use of CS-MOUNT LENS, adjust Flange Back (When

use of C-MOUNT LENS, adjust by fixing optional C-MOUNT

ADAPTOR)

22.FLANGE BACK FIXING SCREW

Upon completion of the Flange Back focus, turn the flange

back focus fixing screw clockwise and fix the flange back

focus adjustment ring.

33.SUPPORTER FIXING EQUIPMENT

It is for the application of wall or ceiling installation. It is

available to use on the top or bottom of camera. If user want

to change the position, please use same screw to fix it from

other position. It may cause unexpected defectiveness once

you use other type of screw.

* No supplying of Supporter(Bracket, Triangle bar,

Housing)

10 IMN-511/512(HIGH RESOLUTION IP CAMERA)

8 9 10 11

IMN-511/512(HIGH RESOLUTION IP CAMERA)

11.SERIAL TERMINAL PORT

Connects to “RS-485 communication cable” for PAN/TILT/

ZOOM/FOUCS Controllers

- + : Connects to “+” port of RS-485 communication cable

- – : Connects to “–” port of RS-485 communication cable

22.SENSOR IN/OUT PORT

Connects to 1 sensor input and 1 output(TTL)

- IN : Connects to “+” port of the Sensor Input

- OUT : Connects to “+” port of the Sensor Output

- GND : GROUND

33.AUDIO IN/OUT PORT

Connects to 1channel MIC and 1channel speaker

- SPK : Connects to “+” port of the Speaker

- MIC : Connects to “+” port of the MIC

- GND : GROUND

44.LAN(ETHERNET) PORT

Connects to Ethernet(10/100Base-T) and xDSL/Cable

modem network with RJ-45 Connector.

*Supportable network type : LAN(10/100 Base-T)

55.POWER INPUT TERMINAL

Supplies the power to IMN-511/512 with a DC 12V input

terminal.

External Power : DC Power Adaptor(12V)

Power Consumption : 7.2Watt@12V DC for IMN-511

8.4Watt@12V DC for IMN-512

66.AUTO IRIS LENS CONNECTION PORT

It is a port for connection of a video iris lens or DC iris lens, if

they are used.

77.AUTO IRIS SELECTION SWITCH

With an auto iris lens mounted, you can select DC iris lens or

a video iris lens using this switch.

12 IMN-511/512(HIGH RESOLUTION IP CAMERA)



POWER LED

Indicates the power supply status of a camera. The power

lamp turns on when power is properly supplied.



DC IRIS LENS ADJUSTMENT

It is a volume to adjust the brightness of DC iris lens. Turning

this volume to the left makes it darker, and to the right,

brighter.





FACTORY RESET BUTTON

IMN-511/512 parameters restored factory default values.

* Default IP Address : 192.168.1.100

Subnet Mask : 255.255.255.0

Gate way : 192.168.1.1





VIDEO OUTPUT PORT

It is a video output port, which is set to 75Ωimpedance.

Connect to the video input connector of monitor.

(See the installation method)

IMN-511/512(HIGH RESOLUTION IP CAMERA)

This section is intended for use by the product administrator.

Operators and viewers should check the detail through

enclosed CD and manual file.

You may connect the following items with IMN-511/512, such as

lens mounting, connecting a monitor, network devices, audio

device, alarm sensors, Serial (PAN/TILT) controllers.



LENS MOUNTING AND CONNECTION

* To make a correct adjustment, the help of an expert may

be required.

Connection method differs depending on lens types. So,

becareful about it when mounting lenses.

(Check the lens type to see if it is C MOUNT or CS MOUNT.)

You can use such lenses as C mount lens, CS mount

lens,and automatic iris lens, etc.

- Identification of a lens by lens mounting:

The flange back is the distance from the reference plane

(where a lens and a camera are coupled) to the focal plane. If

this distance is not determined accurately, you cannot get

accurate images.

LENSES Flange Back(B) Dimension(A)

C-mount Lens 17.526mm 10mm or below

CS-mount Lens 12.5mm 5.5mm or below

14 IMN-511/512(HIGH RESOLUTION IP CAMERA)

F: the focal plane

CONNECTION METHOD FOR C MOUNT LENS AND CS

MOUNT LENS

Upon mounting a CS mount lens, assemble

󰣤

Upon mounting a C mount lens, assemble

󰣣

󰣤

1. CAMERA ADAPTOR

2. C MOUNT ADAPTOR

3. CS MOUNT ADAPTOR

4. STOP SCREW

󰣢󰣣

󰣤

󰣥

IMN-511/512(HIGH RESOLUTION IP CAMERA)

When using CS lens: As shown in Figure1, turn the CS lens

clockwise to connect it.

When using C lens: As shown in Figure2, connect the C

mount adaptor by turning it

clockwise, and then connect the C

lens by turning it clockwise as shown

in Figure3.

WHEN USING AN AUTO IRIS LENS

1) Peel off about 8mm of a lens cable’s covering from the end.

Figure1

Figure2

Figure3

8mm

16 IMN-511/512(HIGH RESOLUTION IP CAMERA)

2) Peel off about 2mm of the inner wires from the end of the

lens cable.

3) Remove the cover of the lens connection plug, and connect

the lens cable wires to the connector pins of the connection

plug.

Wiring the Video Iris Lens

* What is a video iris lens? When the power and video

signals are supplied from the camera, if the video signal is

stronger than the specified value, this video iris lens

automatically moves the iris to the closing direction; and if

weaker, to the opening direction so as to provide the

constant image output even when the brightness of an object

is changed. The lens includes a circuit that controls an iris.

2mm

Lens Connector

Control Cable

Auto Iris Lens

Lens Connector Cover

RED(power) to Pin #1

N.C(not connected) to Pin #2

WHITE(video signal) to Pin #3

BLACK(ground) to Pin #4

IMN-511/512(HIGH RESOLUTION IP CAMERA)

Wiring the DC Iris Lens

* What is a DC iris lens? A DC iris lens has only an iris

controlling coil which opens and closes an iris without an

iris controlling circuit inside a lens. So a lens controlling

circuit is configured in a camera to receive the control

signals (DC) sent by the camera lens so as to provide the

constant image output.

4) Connect the connection plug (connected to a lens cable) to

the auto lens connector on the back of the product.

5) If you use a DC iris lens, select DC from the lens selection

switch; if a video iris lens, select VIDEO.

* Recommend Auto Iris Lens in the condition of bad lighting

condition.(The place where lighting is continuously changing)

RED(power) to Pin #1

N.C(not connected) to Pin #2

WHITE(video signal) to Pin #3

BLACK(ground) to Pin #4

RED(DAMP -) to Pin #1 WHITE(DRIVE +) to Pin #3

GREEN(DRIVE -) to Pin #4

BLACK(DAMP +) to Pin #2

IMN-511/512

18 IMN-511/512(HIGH RESOLUTION IP CAMERA)



LENS ADJUSTMENT

* To make a correct adjustment, the help of an expert may

be required.

Re-adjustment of a lens may be required depending on the

conditions of an object and lens combination. To do this, turn

off the ELC switch on the back of the mainframe, and make

the adjustment in the following way.

IN CASE OF DC IRIS LENS

- Turn off the AGC switch on the back of the mainframe.

- Adjust the VR in rear panel of IMN-511/512 to control Iris.

- Select the AGC switch ON or OFF.

IN CASE OF VIDEO IRIS LENS

- Turn off the AGC switch on the back of the mainframe.

- Adjust the LEVEL and ALC of the Video Iris Lens.

- Select the AGC switch ON or OFF.

ALC adjust

LEVEL adjust

To make the monitor screen Turn the level

Darker anticlockwise

Brighter clockwise

Page is loading ...

Inter-m IMN-512 Operating instructions

Brand: Inter-m

Model: IMN-512

Category: Security cameras

Type: Operating instructions

Download PDF

report

Inter-m IMN-512 Operating instructions

Inter-m IMN-512 Operating instructions

Other documents