2. DIVERSIFIED WOODCRAFTS
  3. SMT-7242

DIVERSIFIED WOODCRAFTS SMT-7242 Assembly Instruction

  • Hello! I've reviewed the assembly instructions for the SMT-7242 sewing machine table. This document provides a detailed, step-by-step guide on how to assemble your new table, covering everything from attaching the legs to mounting the tabletop. I'm here to answer any questions you may have about the assembly process.
  • What tools are required for assembly?
    What are the first steps in assembly?
    How to attach the legs to the apron assembly?
    How to attach the table top?
NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMK2/27/14
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES



DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
SMT-7242
SEWING MACHINE TABLE - DOUBLE
ASSEMBLY INSTRUCTIONS
REV A
1 OF 5NTS
EMK 2/27/14
NOTE:
1. MODEL VIEWS MAY NOT REPRESENT EXACT MODEL PURCHASED
SEWING MACHINE TABLE
SMT-7242
ASSEMBLY INSTRUCTIONS
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\SMT-7242.dwg, 11/30/2015 10:26:48 AM, DWG To PDF.pc3
NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTIONREV. ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES



DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
SMT-7242
SEWING MACHINE TABLE - DOUBLE
TOOLS AND ASSEMBLY COMPONENTS
REV A
2 OF 5NTS
EMK 2/27/14
NOTE:
1.
ASSEMBLY COMPONENTS
ITEMS INCLUDED PART # PART DESCRIPTION QTY
CABINET ASSEMBLY N/A B95 - 29H X 18W X 22D 2
LEGS 501100 LEG,MAPLE,W/ HANGER BOLT AND T
NUT 2
LEG LEVELER 100079 LEG LEVELER,BLK BASE 1 2
HEX NUT 100044 NUT,HEX 5/16-18 STEEL ZINC 2
WASHER 100039 WASHER,SPLIT LOCK 516 2
TOP 17-0058 TOP,PLAM,1.25X42X72,ALMOND 1
APRON ASSEMBLY N/A TWO APRONS WITH CORNER BRACKETS 2
BRACE N/A TABLE BRACE - 17.50" LONG 2
CONFIRMATS - CABINET 228564 SCREW,7MMX50MM,ALLENHEAD,BLACK 4
CONFIRMATS - BRACE 227578 SCREW,7MMX90MM,ALLENHEAD,BLACK 4
4.25 L BRACKET 100355 BRACKET,RAIL 1.25X1.25X4.25 4
SCREWS - POCKET HOLE 100641 SCREW,#8X134" QUAD RD WASH HD 10
SCREWS - L BRACKET 100649 SCREW,#8X34" PHIL TRUSS HEAD SMS 16
TOOLS REQUIRED
12" WRENCH
12" SOCKET & TORQUE WRENCH - OPTIONAL
4MM ALLEN WRENCH
SQUARE BIT DRIVER
EMK2/27/14
CREATED ASSEMBLY INSTRUCTIONS
A-
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\SMT-7242.dwg, 11/30/2015 10:26:50 AM, DWG To PDF.pc3
NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTIONREV. ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES



DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
SMT-7242
SEWING MACHINE TABLE - DOUBLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 5NTS
EMK 2/27/14
NOTE:
1.
EMK2/27/14
CREATED ASSEMBLY INSTRUCTIONS
A-
STEP 1:
LAY THE APRON ASSEMBLIES ON THE FLOOR OR
ANOTHER TABLE, WITH ROUNDED EDGES FACING UP.
STEP 2:
INSERT HANGER BOLT ON ONE OF THE LEGS THROUGH
THE CORNER BRACKET AND INSERT LOCK WASHER AND
HEX NUT. USING A 12" WRENCH OR 12" SOCKET AND
TORQUE WRENCH, SCREW ON THE NUT BUT DO NOT
TIGHTEN ALL THE WAY. REPEAT FOR THE OTHER LEG AND
APRON ASSEMBLY.
STEP 3:
SCREW LEG LEVELER INTO T-NUT
ON BOTTOM OF THE LEGS.
STEP 4:
USING A 4MM ALLEN WRENCH, INSERT THE CONFIRMATS INTO ONE LEG
AND SCREW INTO BRACE. REPEAT FOR OTHER LEG. MAKE SURE BRACE IS
STRAIGHT AND ALL CONFIRMATS ARE TIGHT. GO BACK TO STEP 2 AND
TIGHTEN UP THE HANGER BOLT FOR EACH LEG USING A 12" WRENCH OR 12"
SOCKET AND TORQUE WRENCH, TO A MINIMUM OF 12 FT LBS BUT NOT TO
EXCEED 17 FT LBS .
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
CLOSE UP OF CORNER LEG
ASSEMBLY
ROUNDED EDGES
FACING UP
CLOSE UP OF LEG LEVELER
ASSEMBLY
LEG LEVELER
LEG BRACE
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\SMT-7242.dwg, 11/30/2015 10:26:55 AM, DWG To PDF.pc3
NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTIONREV. ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES



DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
SMT-7242
SEWING MACHINE TABLE - DOUBLE
ASSEMBLY INSTRUCTIONS
REV A
4 OF 5NTS
EMK 2/27/14
NOTE:
1.
EMK2/27/14
CREATED ASSEMBLY INSTRUCTIONS
A-
STEP 5:
FLIP APRON ASSEMBLY OVER ONTO THE LEG, ALIGN THE LONG APRON TO THE LEFT SIDE OF CABINET IN
PROPER LOCATION AND SCREW ON THE L BRACKET THAT IS PROVIDED. REPEAT PROCESS FOR THE
SHORT APRON TO THE BACK OF OTHER CABINET.
LEFT SIDE OF
CABINET
LONG APRON
SHORT APRON
CABINET BACK
CLOSE UP OF LEFT SIDE OF CABINET AND LONG APRON
ASSEMBLY
CLOSE UP OF BACK SIDE OF CABINET AND SHORT APRON
ASSEMBLY
STEP 6:
ALIGN UP THE BRACE WITH THE BACK OF THE CABINET IN THE PROPER LOCATION AND USE A
4MM ALLEN WRENCH TO SCREW IN THE CABINET CONFIRMATS PROVIDED FROM INSIDE OF
THE CABINET. REPEAT PROCESS FOR OTHER BRACE.
OUTSIDE OF CABINET
INSIDE OF CABINET
BACK OF CABINET
CONFIRMATS
LONG
APRON
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\SMT-7242.dwg, 11/30/2015 10:27:00 AM, DWG To PDF.pc3
NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTIONREV. ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES



DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
SMT-7242
SEWING MACHINE TABLE - DOUBLE
ASSEMBLY INSTRUCTIONS
REV A
5 OF 5NTS
EMK 2/27/14
NOTE:
1.
EMK2/27/14
CREATED ASSEMBLY INSTRUCTIONS
A-
STEP 7:
USING A SQUARE BIT DRIVER, POCKET SCREW THE TOP ON.
COMPLETE UNIT SHOWN
UNDERNEATH OF TABLE SHOWN
STEP 8:
SET TABLE IN PLACE. ADJUST LEG LEVELERS TO LEVEL THE TABLE.
PLACE GROMMETS IN TOP.
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\SMT-7242.dwg, 11/30/2015 10:27:05 AM, DWG To PDF.pc3
/