Nikko Stirling NSALIGNER Owner's manual

Brand
Nikko Stirling
Model
NSALIGNER
Type
Owner's manual

Nikko Stirling NSALIGNER is a valuable tool for firearms owners who want to save time and ammunition when sighting in their firearms after attaching a new riflescope. It allows for pre-zeroing of the firearm before proper range or field zeroing is done. The NSALIGNER comes with a variety of bore arbors to match different firearms barrel calibers, ensuring a snug fit in the muzzle. Once inserted, the aligner can be rotated to achieve a vertical position in line with the riflescope.

Nikko Stirling NSALIGNER is a valuable tool for firearms owners who want to save time and ammunition when sighting in their firearms after attaching a new riflescope. It allows for pre-zeroing of the firearm before proper range or field zeroing is done. The NSALIGNER comes with a variety of bore arbors to match different firearms barrel calibers, ensuring a snug fit in the muzzle. Once inserted, the aligner can be rotated to achieve a vertical position in line with the riflescope.

Scope Aligner Instructions for use.
Warning
Please check your firearm is not loaded ! Your action should remain open at all times
and the barrel should be pointed in a safe direction during the use of this Scope aligner.
Intended Use
This product is designed to allow firearms owners to safe Valuable time and
ammunition when sighting in their firearms when they have attached a new riflescope.
This pre Zeroing of the firearm should be followed by proper range or field zeroing
before the firearms used in the field.
Warning
Be sure to wear ear and eye protection whenever firing a firearm.
Instructions
Please follow the instructions supplied by your riflescope and mount maker for correctly
mounting your riflescope. We assume this is done correctly and offer no guarantee
regarding this. If you are uncertain, We highly recommend you consult a firearms
expert or the retailer that you bought the products from.
Once the scope is mounted correctly you can use the Scope aligner to pre Zero your
firearm.
1.Select the correct bore Arbor that matches your firearms barrel calibre . Each
Arbor is clearly marked. Slide the Arbor into the scope aligner with the notched
section first. Rotate the Arbor until the notched section is facing to the screw that
should be hand tightened to secure the Arbor to the Scope aligner.
2.Insert the Arbor into the muzzle of the firearm. If it does not fit easily recheck you
have the correct Arbor.
3.Rotate the aligner in the barrel to locate it in a vertical position in line with the
riflescope.
4.Look through the scope and you should see the Sighting grid clearly. If the grid is
not clear you may need to adjust the focus of the scope, Follow the instructions
supplied with your scope to adjust the image.
5.Remove the elevation and windage adjustment caps. Make the adjustment of the
windage and elevation according the scopes instruction manual to bring the reticle
of the scope to the centre of the grid. Once this is achieved you should replace the
adjustment covers and remove the Aligner from the barrel.
6.Your firearm is now pre Zeroed!
www.nikkostirling.corn
  • Page 1 1

Nikko Stirling NSALIGNER Owner's manual

Brand
Nikko Stirling
Model
NSALIGNER
Type
Owner's manual

Nikko Stirling NSALIGNER is a valuable tool for firearms owners who want to save time and ammunition when sighting in their firearms after attaching a new riflescope. It allows for pre-zeroing of the firearm before proper range or field zeroing is done. The NSALIGNER comes with a variety of bore arbors to match different firearms barrel calibers, ensuring a snug fit in the muzzle. Once inserted, the aligner can be rotated to achieve a vertical position in line with the riflescope.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents