Beckett SAP1.5 Installation guide

Brand: Beckett

Model: SAP1.5

Type: Installation guide

Beckett SAP1.5 is a solar-powered air pump designed to boost oxygen levels in outdoor ponds and fountains, improving the health and well-being of fish and other aquatic creatures. Key features of the Beckett SAP1.5 include:

Powered by sunlight: The air pump is powered by a solar panel, eliminating the need for electrical outlets or batteries. This makes it an eco-friendly and cost-effective solution for aerating outdoor water features.
Automatic operation: The air pump automatically turns on when there is sufficient sunlight and turns off when the sun is not shining. This ensures that the pump operates only when needed, conserving energy.

Powered by sunlight: The air pump is powered by a solar panel, eliminating the need for electrical outlets or batteries. This makes it an eco-friendly and cost-effective solution for aerating outdoor water features.
Automatic operation: The air pump automatically turns on when there is sufficient sunlight and turns off when the sun is not shining. This ensures that the pump operates only when needed, conserving energy.

SOLAR AIR PUMP INSTRUCTIONS

MODEL: SAP1.5

PARTS INCLUDED:

1) Solar Panel with ground spike

2) Air Pump

3) Air Hose

4) Bubble Stone

Read and Follow all Safety Instructions. Save This Manual for Future Reference.

Beckett’s Solar Air pump kit is designed to boost oxygen levels in outdoor ponds and fountains to keep

fish and other aquatics healthy and happy.

Overview

The air pump is powered by the solar panel. In order for it to work best the panel should

directly face the sun for as long as possible each day.

The performance of the air pump depends on the sunlight intensity and incident angle the

sun strikes the panel

There is no on/off switch. The air pump turns on when there is enough sunlight striking the

solar panel

Assembly

1) Roll out the air hose and the pump power cord

2) Connect the air hose to the bubble stone

3) Connect the other end of the air hose to the pump outlet barb

4) WARNING: The pump is not submersible so it should be placed in a dry and

safe area near the pond.

5) Connect the ground spike pieces together and connect the spike to the back

of the solar panel

6) Locate the panel directly facing the sun at mid-day

7) Insert the plug from the power cord into the pump

LIMITED WARRANTY

Each Beckett Corporation (“Beckett”) product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth

below. The Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows:

Product Type or Name Warranty Period Product Type or Name Warranty Period

Pump Models: Liner Material:

FR Series, DP800-1800, G Series, W Series …………2 Years 35 mil PVC…………………………………..20 Years

UL6500A; XL-6500A………………………. 2 Years 40 mil EPDM………………………...………20 Years

Other Pump Models……………………….. 1 Year 20 mil PVC…………………………………..15 Years

Pre-Formed Poly Ponds………………………..………. 15 Years UV9/UV13 Filter……………………………. 1 Year

Waterfall Weir & Skimmer………………………..……… 5 Years All Other Beckett Products.……………………………90 Days

APPLICATION: The warranty covers only properly installed and maintained Beckett products and is limited to application at normal temperature 32º F to 86º F, (0º C to 30º C)

pumping fluids with a specific gravity up to 1.1 and with a pH range of 5 to 9 (fresh water). Other liquid applications and extreme temperature uses must be approved in

advance by Beckett. The warranty does not apply to or cover damages or defects caused by external causes, including, but not limited to, improper or faulty installation or

unauthorized modification, lightning, electrical surges, abuse, misuse or abnormal use or misapplication, including use in a manner inconsistent with the product’s intended

function. The purchaser is responsible for determining the suitability of the product for its intended use. If products are damaged in transit, a claim should be filed with the

carrier.

REMEDY: If there has been a failure to conform to the warranty, Beckett will, at Beckett’s option, repair, replace or issue a credit or refund for the particular nonconforming

product or part. Repair, replacement, credit or refund, at Beckett’s option, is the exclusive remedy in the event of a failure to conform to the warranty. Warranty claims must

be made within 3 months after expiration of the applicable Warranty Period.

ADMINISTRATION: Warranty claims must be made by calling Beckett Corporation, Customer Service Dept., telephone (866) 466-4319. Proof of Purchase is required and a

$5.00 shipping and handing fee applies to all warranty replacements.

INSTALLATION, REMOVAL AND/OR SHIPPING CHARGES: The warranty does not cover any costs associated with the installation, removal or shipping of products subject

to warranty claims.

DISCLAIMER AND LIMITATION: THE EXPRESS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND

REMEDIES, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE FULL EXTENT PERMITTED BY LAW, BECKETT EXPRESSLY DISCLAIMS ANY AND

ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IF IMPLIED WARRANTIES CANNOT BE DISCLAIMED, ALL SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE

EXPRESS WARRANTY.

BECKETT DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL BECKETT BE LIABLE OR

RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. BECKETT’S AGGREGATE LIABILITY UNDER THIS WARRANTY OR WITH RESPECT TO ANY

PRODUCT COVERED HEREBY, UNDER ANY LEGAL THEORY, SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE NONCONFORMING PRODUCT. THE

LIMITATIONS CONTAINED IN THIS PARAGRAPH SHALL NOT APPLY TO INJURY TO THE PERSON.

Some States do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of an implied warranty, so the above

limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from State to State.

FOR YOUR RECORDS:

Date of Purchase __________________________________

Model Number __________________________________

Name of Dealer __________________________________

PLEASE KEEP RECEIPT IN CASE OF WARRANTY SERVICE.

BECKETT CORPORATION

3321 E. Princess Ann Rd.

Norfolk, Va. 23502

www.beckettpumps.com

Toll Free: 1-866-466-4319

Caution

1) Keep the air pump dry, it is not submersible

2) Do not block the air intake (four holes on the bottom) or

allow rain water to enter

3) Do not expose small components to small children as

they could become a choking hazard

4) In your installation be sure power cord or air hose do not

pose a tripping hazard

5) Solar panel is glass and can break

Cleaning and Maintenance

1) Keep the surface of the

solar panel clean to

maximize its power

2) Keep the bubble stone

clean or replace it as it

clogs

Technical

Solar Panel: Capacity-1.5 Watts, Nominal Voltage-7.68 V, Nominal current-195mA, Safety class-IP65

Air Pump: Operating voltage-6-9 VDC, Flow-Max 2 L/M, Max pressure-440 mmHg,

Safety class-IP44, Air hose- 6.5’, Power cord -9.8’

Beckett SAP1.5 Installation guide

Brand: Beckett

Model: SAP1.5

Type: Installation guide

Powered by sunlight: The air pump is powered by a solar panel, eliminating the need for electrical outlets or batteries. This makes it an eco-friendly and cost-effective solution for aerating outdoor water features.
Automatic operation: The air pump automatically turns on when there is sufficient sunlight and turns off when the sun is not shining. This ensures that the pump operates only when needed, conserving energy.

Download PDF

report

Beckett SAP1.5 Installation guide

Beckett SAP1.5 Installation guide

Related papers

Other documents