FCC Radiation Exposure Statement:
Quick Start Guide
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Heatsink Micro SD Card Slot
Battery Slot
1 Product List
Ring-Shaped Indicator
Power Button
Telephoto Camera
Wide-Angle Camera
Battery Indicator BaseType-C Port
1/4" Screw Thread
2 Let's Play
1. Power on/off
Short press the power button to power it on. Long press the
power button for above 2 s to power off.
2. Download DWARFLAB App
3. Wireless Connection
4. Enjoy it!
3 Attention
After DWARF II powers on, please open DWARFLAB App and
make sure that the Bluetooth and WiFi of your
smartphone/tablet are open. Click the camera button in
DWARFLAB App to retrieve the DWARF II, and click the device
name in the device list window to start the connection. Then
the connection will be established automatically. When the
connection is successful, DWARFLAB App will prompt to the
photography page.
Please download DWARFLAB App at dwarflab.com.
You can also get it at App Store or Google Play. Please search
DWARFLAB.
1. Please do not disassemble or remodify the product.
2. Please do not use the product in heavy rain or high
temperature (sun exposure) environments, or put it in water.
3. Please do not touch the lens with hard, sharp objects or
corrosive solutions to avoid damage.
4. If the lens is dirty, please use a clean lens cloth to wipe.
5. Never charge the DWARF II if the temperature is under 0 °C /
32 °F. It could cause irreversible damage to the DWARF II's
battery. Always charge it between 5 °C / 41 °F and 45 °C / 113 °F.
Enjoy it! To unlock more interesting features, please visit
dwarflab.com.
-
1
-
2
DWARFLAB DWARF II Smart Telescope User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
ACTi E48 E413 E415 E416 E417 E418 User manual
-
-
-
Uncle Milton Solar System In My Room™ Owner's manual
-
ACTi E99M User manual
-
LevelOne FCS-3093 Hardware User Manual
-
-
-
ACTi D41A User manual
-
ACTi E413 User manual