CURT 40034 User manual

CURT
Brand
CURT
Model
40034
Type
User manual

This manual is also suitable for

INSTALL ATION
MANUAL
SETUP REGISTRATION & WARRANTY
1. Download the app
Search 'BetterWeigh' in the
Google Play or iOS App Store and install.
2. Installation
BetterWeigh
™
is compatible with OBD-II
equipped vehicles (US 1996 and newer).
Plug the BetterWeigh
™
into the diagnostic
port, typically located below the steering
wheel, near the driver's door.
CURT stands behind our products with
industry-leading warranties. To get copies
of the product warranties, register your
purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
Functionality on manual transmission vehicles limited to
payload, tongue weight, pin weight and weight distribution
with
CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
51701-INS-RD
•
05/19/2020
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected
• Increase the separation between
the equipment and receiver
• Consult the dealer or an experienced
radio / TV technician for help
BetterWeigh
™
only allows one Bluetooth connection. Any other vehicle sync functions
will not work when using the app. This is to reduce the 'noise' during calibration.
Vehicle should be warmed up prior to running weigh features.
  • Page 1 1
  • Page 2 2

CURT 40034 User manual

CURT
Brand
CURT
Model
40034
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents