RAB Lighting PAD2W-3/4 Operating instructions

Type
Operating instructions

This manual is also suitable for

PAD PENDANT ADAPTOR INSTALLATION INSTRUCTIONS
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable
parts inside.
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call
the Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
DOwNLIghT MOUNTINg
Mount to a 1/2” or 3/4” NPS threaded pipe (not supplied) with supplied Locknuts as a pendant and at the ceiling to
a junction box and cover plate (not supplied) appropriate for the weight of the nal xture and compliant with all local
electrical, structural and safety codes.
CAUTION: This adaptor can be used for multiple xture combinations and any length required as long
as the installation properly supports the weight of the xtures.
1. Mount each ALED xture as shown in the sample below. See specic xture instructions for more details. Use
instructions for mounting to a RAB pole. The illustrations below detail models ALED 10W through 26W, for other
models refer to xture specic pole mount instructions.
2. Wire xtures using UL approved wire connectors and according to NEC and local codes. Connect green Ground Wire
to the supply ground.
3. Slip Cap Bracket onto opposing bolts from xtures. Orient as shown below. Use shorter Cap Screw to mount Cap to
the Cap Bracket.
4. Wrap teon tape onto the threads to prevent moisture from getting into the Housing.
ALED xture
PAD4
Cap Screw
Cap Bracket
Cap Bracket
Adaptor Bolt
Gasket
Cap Screw
Cap
Gasket
Locknuts
Ground
wire
Ground
wire
PAD PENDANT ADAPTOR INSTALLATION INSTRUCTIONS
UPLIghT MOUNTINg
Mount to a 1/2” or 3/4” NPS threaded pipe (not supplied) with supplied Locknuts as a pendant and at the ceiling to a
junction box and cover plate (not supplied) appropriate for the weight of the nal xture and compliant with all local
electrical, structural and safety codes.
CAUTION: This adaptor can be used for multiple xture combinations and any length required as long
as the installation properly supports the weight of the xtures. Refer to specic xture instructions for
suitability as an uplight in wet locations.
1. Mount each ALED xture as shown in the sample below. See specic xture instructions for more details. Use
instructions for mounting to a RAB pole.
2. The illustrations below detail models ALED 10W through 26W, for other models refer to xture specic pole mount
instructions. Wire xtures using UL approved wire connectors and according to NEC and local codes. Connect green
Ground Wire to the supply ground.
3. Slip Cap Bracket onto opposing bolts from xtures. Orient as shown below. Use longer Cap Screw to mount Cap to
the Cap Bracket.
4. Wrap teon tape onto the threads to prevent moisture from getting into the Housing.
PAD4-IN-0712
CLEANINg & MAINTENANCE
CAUTION: Be sure xture temperature is cool enough to touch. Do not clean or maintain while xture is
energized.
1. Clean glass lens & xture with non-abrasive glass cleaning solution.
2. Do not open xture to clean the LED. Do not touch the LED.
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
ALED xture
PAD4
Cap Screw
Cap Bracket
Cap Bracket
Adaptor Bolt
Gasket
Cap Screw
Cap
Gasket
Locknuts
Ground
wire
Ground
wire
  • Page 1 1
  • Page 2 2

RAB Lighting PAD2W-3/4 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI