2. Jenn-Air
  3. JXT8836ADS
JXT8836ADS

Jenn-Air JXT8836ADS Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Jenn-Air JXT8836ADS Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RANGE HOOD
Model Number: JXT8836ADS
Manufacturer Num DeE $88M90S
Size: 36"
USER
GUIDE
TABLE OF CONTENTS
Safety nstructions .................................................... 1
Controls & Features ............................................... 2-4
Maintenance ......................................................... 5-6
Warranty .................................................................. 7
Form No. A/04/03 Part No. US8800-0303A _2003 Maytag Appliances Sales Co. Litho U.S.A.
MODEL: JXT8836ADS
Installation
Theinstallation in this manual is intended for qualified installers, servicetechnicians or persons
with similar qualified background.DONOTattempt to install this applianceyourself. Injurycould
result from installing the unit dueto lack of appropriate electrical and technical background.
All electrical wiring must be properly installed, insulated and grounded. Overly accumulated
greasein old duct work should becleaned out or duct work should be replaced if necessaryto
avoid the possibility of agrease fire. Checkall joints on duct work to insure proper connection
andalljoints should be properly taped.
Operations
Readall instructions in this manual before operating the appliance. Save these instructions for
future reference.
Always leave safety grills and filters in place. Without these components, operating blowers
could catch on to hair,fingers and looseclothing.
NEVERdisposecigarette ashes, ignitable substances,or any foreign objects into blowers.
NEVERleavecooking unattended.When frying, oil in the pan can easilyoverheat and catch fire.
Therisk of self combustion is higher when the oil has been usedseveraltimes.
Cleaning
The saturation of greasy residue in the blower and filters may cause increased flammability.
Keepunit clean andfree of greaseand residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and kept free from accumulation of cooking residue (see
cleaning instructions inside).Oldand worn filters must bereplaced immediately. Donot operate
blowerswhen filters are removed.Neverdisassembleparts toclean without properinstructions.
Disassemblyisrecommended to be performedby qualified personnelonly.Callour service cen-
ter for removal instructions. 1-800-JENNAIR(1-800-536-6247)
The manufacturer declines all responsibility in the event of failure to observe the instruc-
tions given here for installation, maintenance and suitable use of the product. The manufac-
turer further declines all responsibility for injury due to negligence and the warranty of the
unit automatically expires due to improper maintenance.
* Pleasecheck for latest specification revisions before any custom work or cutouts.
CONTROLS & FEATURES
TOUCH CONTROLS & FEATURES
O BmowerOn!Off
0 OiSPllaY(Speed level,DelayOffhdicator,FilterC;lean/Ohallge)
Q LightsOn!Off/Holdto Dim
Adjust6 SpeedLevems_ 15MinOemayOff
@ BlewerOn/Off
Bypressing_, thebmowerisswitchedOnandOff.Whenswitchedon,thebmowerstartsuponspeedmevem3.
Speed Selection
The6speedlevelsareseHectedbypressing(_ to decreaseand(_ to increasespeedmeveLThedispmay
indicatesmevemseBected.
OemayOff
Thisisusedfor programmedshutdownof blowerandHights15minutes afterthe functionis activated.
Press _ once,a dotflashes in the Hewerrighthandsideof dispmay_ indicatingthe function ison.
The hoodwiBcompleteHyshut down in15 minutes.
Lights On/Off/Dim
SwitchmightsOnandOffbypressingkey (_) once. To dim Hights,pressand herod(_) for 2 seconds.
Advance DispmayFunctions
Filter CleanReminder(Metal): _
After every30 hoursofuse,the dispmaywill startflashingan _ remindingyouto cmeanthe metalfilters
for residueandpossiblecmogs.
CONTROLS & FEATURES
CONTROLS: FILTERCHANGE INDICATOR(CARBON FILTERS)
FilterChange Reminder(Carbon,if fitted):
When your hood is installed asa 'Purifying' (Ductless Recirculating)unit, it is fitted with a set of
CarbonFilters to purify exhaust and fumes from cooking, then re-circulate the air within the home.
TheseCarbon Filtersare required to be replaced after every 120 hours of use.The Filter Change
Reminderfunction in the microprocessor needsto beswitched on. The micropr0_ssor inthe
controls when set, will elapse and count usage time and indicate by a flashing _ when carbon
filter replacement is needed.
SettingtheFilterChangeReminder:
WhenOff,hold (_) forapprox.5 seconds.
Thedisplaywill changefrom
(exhaustmode)to (_, (purifyingmode/
carbonfiltersused)thisindicatesthatthe
elapsetimerfunctionisswitchedonand
CarbonFiltersareused.
Filter ReplaceIndicator:
I
When the display _ starts flashing, the
Carbon Filters requirer eplacement.
Re-setting Function:
Once filters are replaced, with hood off,
pressand hold (_, the display will appear;
hold for approximately 5 seconds until
on display disappears _ .The Filter
Change Reminderis now re-set and a new
120 hours elapsecycle is initiated.
hold 5 secs. display from <--> to <C>
@ @@
disp_> flashes
hold 5 sees. display from <C> to < >
CONTROLS & FEATURES
CONTROLS:FILTERCLEANINDICATOR(METALFILTERS)
FilterClean Reminder (Standard Metal Filters fitted)
Whether your hood is installed as an Exhaustor Purifying unit, a set of metal filters are
fitted by the factory. These Metal Filtersare intendedto filter out residue from cooking.
Theyneed not bereplaced on a regular basis but are required to be kept clean. The Fi_r Change
Reminder function in the microprocessorwill automatically indicate bya flashing _R,_
when the metal filters need to be cleaned after every 30 hrs. of use.
Filterscan be cleaned by hand with non-abrasive soapor in a dishwasher.Heavily soiled
filters shouldalso be soaked in grease cutting detergent such as Formula '409' or its equivalent,
prior to cleaning.
FilterCleanReminder:
m
When_- flashesondisplay,themetal
filtersinstall--"A"edarerequiredtobecleaned.
Thiswill occurafterevery30hoursofuse.
display <A> flashes
(
®
Re-settingFunction:
ResettheFilterCleanRemindertimerwhen
filtersarecleanedandre-installed.Press
andhold _) forapprox.5seconds,the
displaywill appear;holdforapproximately
5secondsuntil _ ondisplaydisappears
(_ .TheFilterCleanReminderfunction
isnowre-setanda new30hourselapse
cycleisinitiated.
hold 5 sees. display from <C> to < >
MAINTENANCE
CLEANING
Surface Maintenance:
Clean periodicallywith hot soapy water and clean cotton cloth. Do notuse corrosive or abrasive
detergent (e.g. Cometpowder scrub, EZ-Offoven cleaner),or steel wool/scouring padswhich will
scratch and damage surface.
For heaviersoil use liquid degreaser such as"Formula 409" or "Fantastic" brandcleaner.
After cleaning, you may use non-abrasive stainless steel polish/cleaners such as 3M or ZEP,to
polish and buff out the stainless luster andgrain. Always scrub lightly,with clean cotton cloth, and
with the grain. Do not use any product containing chlorine bleach. Donot use "orange" cleaners.
MetalFilters
TheMetalFiltersfittedbythefactoryare
intendedtofilteroutresidueandgrease
fromcooking.Theyneednotbereplacedona
regularbasisbutarerequiredto bekeptclean.
Filtersshouldbecleanedafterevery30
hoursofuse.UsetheFilterClean
Reminderfunctiononthecontrolsto
determinewhenfiltersrequirecleaning.
Removeandclean by handor in
dishwasher.Spray 'Formula 409' or
equivalent degreasingdetergent and leave
to soak if heavily soiled.
Dry filters andre-install before using hood.
ReplacingMetalFilters
Shouldfilterswearoutduetoageand
prolongeduse,replacewithfollowingpart
number:
HoodModel: PartNo. Filtersin pkg.
JXT8836ADS XXXXXXXX 3
Alsoreplaceanydamagedfilterthat has
puncturedor brokenmesh,bentor brokenframe.
MAINTENANCE
LIGHTS
ReplacingLightBulbs
Makesureall poweristurnedoffand
bulbsarecool.
Removebyturningbulbcounter
clockwise.
If bulbsaredifficultto turndueto
prolongeduse,firmlyattacha glass
suctioncupapprox,thediameterofthe
bulbandturn.
Replacementbulbsareavailableat
specialtylightingstores.Purchasetype
GUIO120V50Whalogenbulbs.
Orto orderbulbs,pleasecallourservice
center:1-800-JENNAIR(1-800-536-6247)
WARRANTY
Warranty:
Full OneYearWarranty - Partsand Labor
Forone (I) yearfrom theoriginalretail pur-
chasedate, any part which fails in normal
homeusewill berepairedor replacedfreeof
charge.
Limited Warranty- Parts Only
SecondYear - Afterthefirst yearfromthe
originalpurchasedate,partswhichfailin nor-
malhomeusewillberepairedorreplacedfree
of chargefor the part itself,with the owner
payingall othercosts,includinglabor,mileage
andtransportation.
CanadianResidents
Theabovewarrantiesonlycoveranappliance
installedin Canadathat hasbeencertifiedor
listedbyappropriatetestagenciesforcompli-
ancetoaNationalStandardofCanadaunless
theappliancewasbroughtintoCanadadueto
transferofresidencefromtheUnitedStatesto
Canada.
Thespecific WafTantiesexpressedaboveam the
ONLYw_fT_tntiesprovidedby the manufacturer:
Tbesew_lfT_tntiesdyeyou specificleg;fffights,and
you tufty alsohaveother rigbtswbich varyfrom
st;ttetost;tte.
What is Not Covered By These Warranties:
1.Conditionsanddamagesresultingfromanyofthefollowing:
a.Improperinstallation,delivery,or maintenance.
b.Anyrepair,modification,alteration,oradjustmentnotauthorized
bythemanufactureror anauthorizedservicer.
c. Misuse,abuse,accidents,or unreasonableuse.
d.Incorrectelectriccurrent,voltage,orsupply.
e.Impropersettingofanycontrol.
2.Warranties arevoid if the original serial numbers havebeenremoved,
altered, or cannot bereadily determined.
3. Light bulbs.
4. Productspurchasedfor commercial or industrial use.
5.Thecostofserviceor servicecallto:
a.Correctinstallationerrors.
b.Instructtheuserontheproperuseoftheproduct.
c.Transporttheapplianceto theservicer.
6.Consequentialorincidentaldamagessustainedbyanypersonasa
resultofanybreachofthesewarranties.Somestatesdonotallowthe
exclusionor limitationof consequentialor incidentaldamages,sothe
aboveexclusionmaynotapply.
If YouNeed Service
Callthe dealer from whom your appliance was purchasedor call
Maytag ServicesS_,Jennair CustomerAssistanceat 1-800-JENNAIR
(1-800-536-6247) USAand CANADAto locate an authorizedservicer.
Be sureto retain proof of purchase to verify warranty status. Referto
WARRANTYfor further information on owner's responsibilities for warranty
service.
• If the dealer or service companycannot resolvethe problem, write to
Maytag Services%Attn:CAIR®Center,RO.Box 2370, Cleveland,TN
37320-2370, or call 1-800-JENNAIR(1-800-536-6247) USAand CANADA.
U.S.customers using TTYfor deaf, hearing impaired or speech
impaired, call 1-800-688-2080.
NOTE.Whenwritingor callingabouta serviceproblem,pleaseincludethe
followinginformation:
a.Yourname,addressandtelephonenumber;
b.Modelnumberandserialnumber;
c. Nameandaddressofyourdealeror servicer;
d.A cleardescriptionof theproblemyouarehaving;
e.Proofof purchase(salesreceipt)
• User'sguides,servicemanualsandpartsinformationareavailablefrom
MaytagServices%JennairCustomerAssistance.
HOTTE DE CUISINIERE
Numero de modele:
Numero du fabricant:
Dimensions:
JXT8836ADS
S88M90S
36"
L'UTILISATEUR
GUIDE
TABLE DES MATIERES
Consignes de securite ...................................................... 1
Commandes e[ fonctions ........................................ 2-4
Entretien ....................................................................... 5-6
Garantie ......................................................................... 7
Form No. A/04/03 Piece No. US8800-0303A ({)2003 Maytag Appliances SalesCo. Litho Etats-Unis
CAMPANA DE COCINA
N0mero de Modelo: JXT8836ADS
N0mero del Fabricante: S88M90S
Tamaho: 36"
USUARIO
GUIA
CONTENIDO$
Instrucciones de Seguridad ............................................. 1
Controles y Caracter[sticas .......................................... 2-4
Mantenimiento ............................................................. 5-6
Garant[a ......................................................................... 7
Form No. A/04/03 Part No. US8800-0303A ({_2003 Maytag Appliances SalesCo. Litho U.S.A.
/