Electrolux EI23CS35KS4A Owner's manual

Electrolux

EN FREEZER ,' REFRIGERATOR

FR REFRIGERATEUR,,' CONGELATEUR

ES REFRIGERADOR CON CONGELADOR

USE AND CARE GUIDE

GUIDE D'UTILISATION ET D'ENTRETIEN

GUIA DE USO Y CUIDADO

808733401 September 2013

Finding information

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiillPlease read and save this Table of contents

.......................................................guide

::::::::::::::::::::::::::::::::::::::::::::::::::::::::

[ Thank you for choosing Electrolux, our new

premium brand in home appliances. This

Use & Care Guide is part of our commitment

to customer satisfaction and product quality

[ throughout the service life of your new

appliance.

ElectroluxElectroluxPurchasereferenceKeepdateaserialmOdelreCordnumbernumber for quick

Finding Information .................................... 2

Safety .......................................................... 3

Installation .................................................. 5

Removing The Doors .................................. 8

Installing Door Handles ............................ 11

Connecting The Water Supply ................. 12

Feature Overview ...................................... 14

Controls .................................................... 15

Storage Features ...................................... 20

Automatic ice & Water

Maker/Dispenser .................................... 28

Changing The Filter .................................. 31

Storing Food & Saving Energy ................. 33

Normal Operating Sounds & Sights ......... 34

Care & Cleaning ........................................ 35

Warranty .................................................... 38

Before You Call ......................................... 39

Questions?

For toll-free telephone support in the U.S. and

Canada: 1-877-4ELECTROLUX

(1-877-435-3287)

For online support and product information

visit http://www.electroluxappliances.com

Safety

Important Safety Instruc- GeneralSafety

tions -- DO not store or use gasoline, or other

flammable liquids, near this or any

other appliance. Read product labels

for warnings regarding flammability and

other hazards.

• Do not operate the refrigerator inthe

presence of explosive fumes.

• Avoid contact with any moving parts of

Safety Precautions the automatic ice maker.

Do not attempt to install or operate your unit • Remove all staples from the carton

until you have read the safety precautions to avoid cut injuries. Staples can also

in this manual. Safety items throughout this damage finishes if they come in contact

manual are labeled with a Danger, Warning or with other appliances or furniture.

Caution based on the risk type. Child Safety

Definitions Packing Materials,

This isthe safety alert symbol. It is used to • Packing cartons covered with rugs,

alert you to potential personal injury hazards, bedspreads, plastic sheets or stretch

Obey all safety messages that follow this

wrap may become airtight chambers and

symbol to avoid possible injury or death, can quickly cause suffocation.

• Destroy or recycle the product's carton,

plastic bags, and any other exterior

wrapping material immediately after the

refrigerator is unpacked. Children should

never play with these items.

ChildEntra rnentAndSuffocation:

• These problems are not limited to the

past. Whether junked, abandoned or

temporarily stored (even for a few hours),

unattended refrigerators and freezers are

dangerous. Please take the precautions

listed below.

Proper Disposal Of Refrigeratorsl

Free,ers

We strongly encourage responsible appliance

recycling/disposal methods. Check with your

utility company or visit

www.eoergystar.gov/recycleformore

information on recycling your old refrigerator.

Before you throw away your old

refrigeratorlfreezer,

• Removethedoors.

• Leave the shelves

in place so

children may not

easily climb inside.

• Have refrigerant

removed by a

qualified service

technician .......................................................................................................

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!i

i!iiiiilSafety

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!,Electrical information

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_

_i_i

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiL

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii•

The refrigerator must be plugged

into its own dedicated 115 Volt, 60

Hz., AC-only electric out_et. The

power cord of the appliance is equipped

with a three-prong grounding plug for

your protection against electrical shock

hazards. It must be plugged directly

into a properly grounded three-prong

receptacle. The receptacle must be

installed in accordance with local codes

and ordinances. Consult a qualified

electrician. Do not use an extension

cord or adapter plug.

If the power cord is damaged, itshould

be replaced by the manufacturer, service

technician or a qualified person to

prevent any risk.

Never unplug the refrigerator by pulling

on the power cord, Always grip the

plug firmly, and pull straight out from

the receptacle to prevent damaging the

power cord.

Unplug the refrigerator before cleaning

and before replacing a LED light to avoid

electrical shock.

Performance may be affected if

the voltage varies by 10% or more.

Operating the refrigerator with insufficient

power can damage the compressor.

Such damage is not covered under your

warranty.

Do not plug the unit into an outlet

controlled by a wall switch or pull cord

to prevent the refrigerator from being

turned off accidentally.

Avoid connecting refrigerator to a

Ground Fault Interrupter (GFI) circuit.

Grounding type Walt receptacle

Power cord with

3-p[0ng gounded p!ug

Installation

This Use & Care Guide provides general

operating instructionsfor your model. Use the

refrigerator only as instructed in this Use &

Care Guide. Before starting the refrigerator,

follow these important first steps.

Location

= Choose a place that is near a grounded

electrical outlet. Do Not use an

extension cord or an adapter plug.

• If possible, place the refrigerator out of

direct sunlight and away from the range,

dishwasher or other heat sources.

• The refrigerator must be installed on a

floor that is level and strong enough to

support a fully loaded refrigerator.

Consider water supply availability for

models equipped with an automatic ice

maker.

installation

2 While pushing toe grille firmly against

cabinet, fasten bottom clips of toe grille

to cabinet.

3 Fasten top clips to cabinet.

Installing Toe Grille

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

4 Close the doors. Fasten right and left side iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

ofclipsintogrooveofbottom hingeby iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

pulling outwards on the edge. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiii

5 Ensurethetriangleflapisrestingontop iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

ofthedoorhinge, iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Installation clearances

Allow the following clearances for ease

of installation, proper air circulation, and

plumbing and electrical connections:

Sides & Top s/sinch

Back 1 inch

Door opening

Toe Grille installation and Removal

To install toe grille

1 Open both doors. Slide left and right

sides of toe grille over lower hinges of

refrigerator.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

I iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

:\ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Toremovetoegrille iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

1 With both doorsclosed, unfasten right iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

and leftsideclipsoftoegrillefrom iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

bottomhingegroove, iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

2 Open bothdoors. Pressfirmlyontopof iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

toe grille until top of toe grille pops off. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

3 Pull toe grille outward towards your body iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

andoffoflowerhinges, iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

RemovingToeerille iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

|nstallation

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_ Your refrigerator should be positioned

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii[ito allow easy access to a counter when

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iremoving food. Forbest useofdrawers and

freezer baskets, the refrigerator should be

in a position where both the refrigerator and

freezer doors can be fully opened.

Guidelines for final positioning of your

refrigerator:

o All four corners of the cabinet must rest

firmly on the floor.

The cabinet should be level at the front

and rear.

The sides should tilt 1Ainch (6 ram) from

front to back (to ensure that doors close

and seal properly).

Doors should align with each other and

be level.

All of these conditions can be met by

raising or lowering the adjustable front

rollers.

To level the doors using the adjustable

lower hinge (some models):

1 Before leveling either door, remove

set screw that locks door height into

position. (The door cannot be adjusted

without set screw removed).

2 If the refrigerator door is lower than

the freezer door, raise the refrigerator

door by turning the adjustment screw

clockwise using a 7/16 inch wrench.

(See illustration.)

3 If the freezer door is lower than the

refrigerator door, raise the freezer

door by turning the adjustment screw

clockwise using a 7/16 inch wrench.

(See illustration.)

Raise

Door__Door TA "

Door } Door

To level the cabinet using the front rollers:

1 Open both doors and remove the toe

grille (see "Toe Grille Installation and

Removal" in the "Installation" section).

2 Close the doors and use a flat-blade

screwdriver or _,tinch socket wrench to 4 After leveling, verify door stop contacts

raise or lower the front rollers, lower hinge and top of door does

not contact upper hinge through full

3 Ensure both doors are bind-free with movement of door (from fully closed to

their seals touching the cabinet on all fully open).

four sides.

5 Reinstall set screw, locking the door

Raise height.

Flange.._ _L-_.-

.... }J

\_ (( -Hinge

I _\ \\ r _1 set Screw

_ (some models)

'-- Hinge

7/16" Wrench and

3/32" Hex Key (some models)

6 Replace the toe grille by fitting it into

place (see "Toe Grille Installation and

NOTE: Level the unit with the adjustable Removal" in the "installation" section).

rollers before leveling the doors.

installation

Installing Shelves 4 Relock shelf by pushing the slide

Your refrigerator was shipped with the shelf mechanism away from you.

hanger and shelf locking clip installed in their

shipping position, Below are the instructions IFH

to install the shelves in your desired locations.

1 Remove shelf from its locked position by J

pulling the slide mechanism toward you.

5 While holding shelf at a 45-degree angle

wltn tne gray nanale facing you, ousn tne

shelf nto the back of the nanger.

2 Lift the hanger directly upwards and pull

toward you to remove it from the ladder,

6 Gentl_ 3etthe shelf onto tne nanger

once tne IOaCKISsecurea Dytne nanger.

3 Place top hooks of the hanger into the

desired slot, and lower straight down

until lower hooks rest on the ladder.

iiiiillRemoving The Doors

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_Getting through narrow 3 Remove any food from the door shelves,

:::::::::::::::::::::::::::::::::::::::::::::::::::::::

4 Close the doors.

To remove the refrigerator top hinge coven

1 Remove the three screws from each

cover over the top door hinges.

2 Lift hinge cover straight up and off.

To remove the refrigerator door'.

1 Trace lightly around the door's top hinge

with a pencil. This makes reinstallation

easier.

2 Remove the two screws from the top

hinge. Lift the door off of the bottom

hinge and set it aside,

Removing The Doors

3 Remove the two bottom hinge screws To remove the freezer top hinge cover:

and hinge if necessary. 1

Remove the two screws from each cover

over the to_) uoor ninges.

2 Lift nlnge cover stralgnt up ana Dff.

Hinge

Screws /

Adjustable Hinge

(some models)

Front Rear Cover

Cover Screws Screw

Top Hinge

Cover ..

Hinge ..

Multi-Wire

Hinge

Screws

Non-Adjusting Hinge

(some models)

To reinstall the refrigerator door, reverse the

above steps.

To remove the freezer door:

1 Detach the multi-wire ca_)le connector

iocatea above IRe ICp nlnge. Grasp ootr

sides of the connector firrr y and ou

aoai'[.

2 Trace lightly around the hinge with a

pencil. This makes reinstallation easier.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

Detach the water tube from the

connector located below the freezer

door. The connector releases when you

press and hold its outer sleeve inward.

With the sleeve held in this position, the

tube can be removed.

To reinstall the freezer door, reverse the above

steps.

Once both doors are in place, ensure they are

mmmmmmmmmmmmmmmmmm,_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i

71717171717171717171717171717171717171717171717171717i_i

aligned with each other and level (Please see

"To level the doors using the lower hinge" for

models with adjustable lower hinges or "To

level the cabinet using the front rollers" for

models with the non-adjustable lower hinges

in the "Installation" section.), then replace the

top hinge cover.

Tubing

Hinge \

Assembly Screws

Non-Adjusting Hinge (some models)

4 Remove the screws from the top hinge

and pull the multi-wire cable through it.

Lift the door off of the bottom hinge.

5 Remove the two bottom hinge screws

and hinge if necessary.

6 Lay the door on its side to avoid damage

to the water tube extending from the

bottom hinge.

|nstalling Door Handles

Door Handle Mounting Instructions

1 Remove handles from carton and any other

protective packaging.

2 Position freezer handle end caps over upper

and lower pre-installed shoulder bolts (A) that

are fastened into door, ensuring the holes

for the set screws are facing towards the

refrigerator door.

3 While holding handle firmly against door, fasten

upperand IowerAIlen set screws (B) with Ensure hand!esetscrewsare facing

supplied Allen wrench, each other with doors closed

Repeat steps 2 and 3 to install refrigerator

handle. Ensure the holes for the set screws are facing towards the freezer door.

Freezer Upper End Cap Refrigerator Upper End Cap

Freezer Lower End Cap Refrigerator Lower End Cap

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

Connecting The Water Supply

needed, measure the distance from the

ice maker inlet valve at the back of the

refrigerator to your cold water pipe. Then

add approximately 7 feet (2.1 meters),

so the refrigerator can be moved out for

cleaning (as shown).

A shutoff valve to connect the water

supply line to your household water

system. DO NOT use a self-piercing type

shutoff valve.

Do not reuse compression fitting or use

thread seal tape.

A compression nut and ferrule (sleeve)

for connecting a copper water supply

line to the ice maker inlet valve.

Before Installing The Water Supply Line,

You Will Need:

Basic Tools: adjustable wrench,

flat-blade screwdriver, and PhillipsTM

screwdriver

Access to a household cold water line

with water pressure between 30 and

100 psi.

A water supply line made of 1Ainch

(6.4mm) OD, copper or stainless steel

tubing. To determine the length of tubing

To Connect Water Supply Line To Ice

Maker Inlet Valve

1. Disconnect refrigerator from electric

power source.

2. Place end of water supply line into sink

or bucket. Turn ON water supply and

flush supply line until water is clear. Turn

OFF water supply at shutoff valve.

3. Remove plastic cap from water valve

inlet and discard cap.

4. If you use copper tubing - Slide brass

compression nut, then ferrule (sleeve)

onto water supply line. Push water

supply line into water valve inlet as far as

it will go (1Ainch/6.4 mm). Slide ferrule

(sleeve) into valve inlet and finger tighten

compression nut onto valve. Tighten

another half turn with a wrench; DO NOT

over tighten. See Figure 1.

Connecting The Water Supply il

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

10.

If you use stainless steel tubing - The

nut and ferrule are already assembled on

the tubing. Slide compression nut onto

valve inlet and finger tighten compression

nut onto valve. Tighten another half turn

with a wrench; DO NOT over tighten.

See Figure 2. Steel

5. With steel clamp and screw, secure /" water line

water supply line (copper tubing only) to

rear panel of refrigerator as shown.

6. Coil excess water supply line (copper "Water Valve

tubing only), about 21/_turns, behind Bracket

refrigerator as shown and arrange coils

so they do not vibrate or wear against

any other surface.

7. Turn ON water supply at shutoff valve L

and tighten any connections that leak. -- Water Valve

8. Reconnect refrigerator to electrical power

source. 6 ft. Stainless Steel water line from

9. To turn ice maker on, lower wire signal household water supply

arm (side mounted) or set the ice

maker's On/Off power switch to the "1"

position (rear mounted).

Test system before use. Check for leaks

again after 24 hours.

Plastic Water

Maker Fill

Tube

(Sleeve)

water line

Bracket

• Water Valve

)er water line

from household

(!nclude enough tubing in loop to allow

moving refrigerator out fOr cleaning:)

Figure 1

Plastic

Inlet

Figure 2

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

CCCCCCCCCCC:I

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ill!

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

,ii i4 !!!!!ii!i;iFeature Overview

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!,Understanding features and terms

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i Your Electrolux refrigerator is designed for optimal convenience and storage flexibility. Use the

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:iillustration below to familiarize yourself with product features and terminology.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:i IceCream

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i DoorLightSwitch Ice Maker _ghtSwitch

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

*Soft Freeze

IceCreamDoorOrBin

Ice

Container

Glass Shelf

Small Basket

and Cover

*Tilt Out

or Fixed

Door Bin

Large

Glide Out

Basket

*Tilt Out

or Fixed

.....................................................Door Bin

Large Basket

*Tilt Out

or Fixed

Door Bin

*Door Bin or

Dairy

Compartment

*SpilIProoff M

Sliding or

Lift Off Shelves

Door Bin

*SpilIProoffM

Sliding or

Lift Off Shelves

*Meat Keeper

or Perfect

Temp Drawer

*Perfect Door Bin

or Door Bin

Crisper Pan

and Cover

*Can Rack

or Fixed

Door Bin

Controls

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

Wave-Touch_- iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Controls

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Wave-Touch TM (some models) 3rdLevel: User Variable Options

Your refrigerator is equipped with a Touching the options icon displays the

Wave=Touch TM Panel user interface display, following options:

It is only necessary to touch the panel. There

is no need to press with force. There are three

levels of display.

I st Level: Sleep Mode

Sleep mode displays only the water, cubes

and crushed options. Touch an icon to

activate the desired dispenser mode. The

active dispenser mode is more brightly

illuminated.

2"d Level: Awakened Display Mode

The display is awakened by touching

anywhere on the panel where there is an

indicator. Black space will not awaken the

display. After 10 seconds of inactivity, the

display will return to the "Sleep Mode".

The following dispenser options are

illuminated:

fast freeze Activates a faster rate for

freezing food.

water filter

Touch to display filter

condition status. Press and

hold for three seconds to

reset.

temp display When active, it allows

the display of the freezer

and refrigerator temps

during "Sleep Mode". The

temperature is displayed

when the red indicator is lit.

mute sounds Tones emitted by each

keypress can be turned off

based on user preference.

The sounds are muted

when the red indicator is

lit, Warning signals will stay

active.

control lock Press and hold for three on off

seconds to activate and

deactivate, This restricts

undesired changes to the

refrigerators settings and

prevents use of the ice and

water dispenser.

Press and hold for three

seconds to turn off the

cooling system to clean the

refrigerator. It also turns off

all dispenser functions. The

temperature display will read

OFR

co.tro=s

¸I

Setting cooling temperatures

1 Touch the panel to illuminate the 2nd

level of display.

2 Select the options icon. Plus (+} and

minus (=}indicators will appear on either

side of the displayed temperatures.

3 Press the + or = indicator to adjust the

temperature to the desired setting.

The temperature display will begin

to blink with the first touch. After five

seconds of inactivity, the display will

beep to accept the new temperature.

After 10 seconds, the display times out

and returns to the basic display.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

Inthe event of a high

temperature condition,

the temperature display

will display "HI". After 20

minutes, the high temp alert

will be displayed and the

alarm off icon will illuminate

until pressed, acknowledging

the alarm, at which time the

highest temperature reached

will be displayed and the

refrigerator will resume

normal operation. All other

modes are turned off until the

alarm is acknowledged.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ZZZZZZZ

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

Controls

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_Wave-TouchTM/IQ-Touch TM IQ-Touch TM (some models)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i_"Sabbath Mode" (somem_e_s)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;iiThe Sabbath Mode isafeaturethat disables

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iportions of the refrigerator and itscontrols

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_ for both Wave=Touch TMand IQ=Touch TM,in

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiilaccordance with observance of the weekly

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:iSabbath and religious holidays within the

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_Orthodox Jewish community.

Sabbath Mode isturned ON and OFF by

pressing and holding both the freezer "-" and

the refrigerator "+" indicators for five seconds

for both the Wave-Touch TMand I¢-Touch TM

modes. The display shows "Sb" while in

Sabbath mode.

In the Sabbath Mode, the high temp alarm is

activeforhealth reasons. Ira hightemperature

Your refrigerator is equipped with a

IQ-Touch TMPanel user interface display. It

is only necessary to touch the panel. There is

no need to press with force. There are three

dispenser modes:

1 Water

2 ice Cubes

3 Crushed ice

A red indicator light will be illuminated above

the active mode.

Touch the icon to activate the options below.

Any of the following options that are activated

have a red indicator light above the icon.

fast freeze Activates a faster rate for

freezing food

control lock Press and hold for three

seconds to activate and

deactivate. This restricts

undesired changes to the

refrigerators settings and

prevents use of the ice and

water dispenser.

water filter

Touch to display filter

condition status. Press and

hold for three seconds to

reset.

A|arms iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

temp display Touch to toggle the freezer iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

and refrigeratortemps iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

displayonandoff, iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Touch and hold temp display iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

totoggledisplayfrom iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Fahrenheitto Celsius. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

factory

default

Resets all refrigerator

settings such as temp, temp

display and ring tones to

their factory default settings.

Setting cooling temperatures

iiiiiiiiiiiiiiiiiiii

Touch the panel to illuminate the display

to the plus (+} and minus (-) indicators

which appear on either side of the

displayed temperatures.

Press the + or- indicator to adjust the

temperature to the desired setting.

The temperature display will begin to

blink with the first touch. The display

times out after five seconds and returns

to the basic display.

High Temp Inthe event of a high

temperature condition, the

temperature display will ..........................................................

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

display "HI". After 20 minutes,

the high temp alert will be

displayed and the mute

sounds icon will illuminate

until pressed, acknowledging

the alarm, at which time the

highest temperature reached

will be displayed and the

refrigerator will resume normal

operation. All other modes

are turned off until the alarm

is acknowledged.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

Storage Features

3 Place top hooks of the hanger into the

desired slot, and lower straight down

until lower hooks rest on the ladder.

4 Relock shelf by pushing the slide

mechanism away from you.

To change the position of a shelf."

1 Remove shelf from its locked position by

pulling the slide mechanism toward you.

5 While holding shelf at a 45-degree angle

with the gray handle facing you, push the

shelf into tne PaCKof the nange_

Electrolux EI23CS35KS4A, EI23CS35KS6A, EI23CS65KS3A, EW23CS75QS0, EW23CS75QS1, EW26SS75QS0, EW26SS85KS2, EW26SS85KS3 Owner's manual

Related papers

Other documents