PRO-FUSION WH-80B Instruction Manual And Owner's Manual

Brand: PRO-FUSION

Model: WH-80B

Type: Instruction Manual And Owner's Manual

PRO-FUSION WH-80B is a quartz infrared electric heater designed to provide warmth and comfort in various indoor settings. With its 1500W power, it can efficiently heat up rooms, offering three heat settings - heat-up, heat-down, and ECO mode for energy saving. The adjustable thermostat allows you to set and maintain the desired room temperature, ensuring optimal comfort. The heater features a tip-over safety switch that automatically turns the unit off if it gets knocked over, preventing accidents.

PLEASE READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS:

PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS

To ensure the best performance from your heater, please read and save the following instructions.

WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE FOLLOWED TO

REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING THE

FOLLOWING:

 Read all instructions before using this heater.

 This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use grip handle

when provided.

 Keep combustible materials such as drapes, furniture, pillows, bedding, papers, clothes, and curtains at

least three (3) feet (0.9m) from the front of heater and keep them at least 1 foot (0.3m) from the sides and

rear of the heater.

 Extreme caution is necessary when heater is used by or near children or invalids and whenever the

heater is left operating and unattended.

 Always unplug heater when not in use.

 Do not use any heater with a damaged cord or plug or after heater malfunctions or has been dropped or

damaged in any manner.Discard heater, or return to authorized service facility for examination, electrical

or mechanical adjustment, or repair. (See Warranty for information)

 Do not use outdoors.

 This heater is not to be used in wet or damp locations such as bathrooms, laundry areas or other similar

indoor locations. Never locate heater where it may fall into a bathtub or other water container.

 Do not run cord under carpeting. Do not cover cord with throw rugs, runners,or similar coverings. Do not

route cord under furniture or appliance. Arrange cord away from traffic area where it will not be tripped

over.

 To disconnect heater, turn control to OFF then remove plug from outlet.

 Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause

electric shock or fire or damage the heater.

 To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces,

like a bed, where openings may become blocked.

 A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or

flammable liquids are used or stored.

 Use this heater only as directed in this manual. Any other use not recommended by the manufacturer

may cause fire, electric shock or injury to persons.

 Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable

power tap (outlet/power strip).

 Keep this heater clean. DO NOT allows foreign objects to enter any vent or exhaust opening. This may

cause shock, fire, or damage to heater.

 This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety .

 Children should be supervised to ensure that they do not play with the appliance.

 If the heater will not operate: See specific instructions in Safety Feature explained in this manual.

CLEANING/ MAINTENANCE INSTRUCTIONS:

During Season Care:

 Before cleaning, be sure to turn off and UNPLUG the heater.

 Clean the Heater with a vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt

from the inside of the heater

 Do not immerse the Heater in water.

 Never use gasoline, benzene or thinner. This will damage the surface of the heater.

 After cleaning, be sure to completely dry the unit with a cloth or towel.

After Season Care:

 Store heater in a cool and dry location with power cord properly secured.

 Please store the unit in its original carton or suitable container.

INSTRUCTION MANUAL AND

OWNER'S GUIDE

Quartz Infrared Electric Heater

Model WH-80B

OPERATING INSTRUCTIONS:

PRE-OPERATING INSTRUCTIONS:

 Carefully remove your heater from the box (please save the carton for off-season storage).

 Make sure the unit is in the OFF position before plugging the heater into the outlet.

 Put the heater on a flat and stable surface.

OPERATING INSTRUCTIONS:

• Plug the cord into a 120VAV/60Hz electric outlet. Only operate heater in upright position with caster

wheels attached.

• Turn the heater ON by turning the Heat Selection Switch.

CONTROL PANEL:

1. Energy-saving indicator：indicate when energy-saving mode is on.

2. Heat-down indicator: indicate when heat-down mode is on.

3. Heat-up indicator: indicate when heat-up mode is on.

4. Signal-receiving window: used for receiving remote control signal.

5. Fan indicator：indicate running when fan works；indicate stopping when fan stops.

6. Timer indicator: indicate when timer functions.

7. indicator: indicate when operation buttons are locked.

8. Electro lock button

9. Mode button: used for selecting running mode

10. Timer-power –on/off button: used for setting timer-power-on/off.

11. Temp and time value display: indicate set temperature and time value

12. Temp down button: used for reducing set temperature.

13. Temp up button: used for raising set temperature.

14. ON/OFF button：used for power-on /power-off

REMOTE CONTROL: The remote control functions are the same as the manual operations.

1. Power on and select the mode.

Turn the heater on by pressing the ON/OFF

button on the control panel or by pressing

the Power button on the supplied remote

control.

Select a heat setting.

Press the MODE button to toggle between

the three heat settings.

Power for heat-

up mode is 1500W; and

heat-

down is 1000W. ECO mode is an

Economic Energy Saving Function. When

ECO mode is chosen the heater will

consume one-

third less power once the

room temperature reaches a certain point.

2. Set room temperature

Or Or

Adjust the thermostat by pressing the arrows

on the control panel or remote control.

Set temperature indication varies from 59°F to

86°F

. Once you have chosen the desired

temperature, the heater will remain on until the

room temperature increases to the temperature

on the digital display. The heater will cycle on

and off to maintain the desired room

temperature.

3. Set timer-power-off

The unit has a feature of timer-power-off or on.

Press the button ”Timer” on control panel or button “TIMER”

on remote control.

Time in LED display flashes.

Press the button “Timer” on control panel or button “TIMER”

remote control to adjust time value for timer-power-off.

Value can be decreased at 1hr interval.

Time value for timer-power-off stops flashing 10 seconds

after time value adjustment. Then the timer-power-off is

finished .

Timer indicator on control panel indicates timer’s

functioning.

Press the ON/OFF button either on control panel or remote

control. Timer-power-off is cancelled. Then timer indicator is

off and time value disappears.

4. Set electro lock

For children’s safety, you can set the electro lock.

And

Press Temp Up and Te

mp Down buttons once for 3

seconds. Locking is fulfilled when a buzzer rings.

Lock mark indicates. Locking can be set in both power-on

and power-off modes. When locked, control panel and

remote control failed to function.

And

When release is needed, please re-press Temp Up and

Temp Down buttons once for 3 seconds. Release is fulfilled

when a buzzer rings. Lock indication disappears. Control

panel and remote control return to function.

5. Instruction to other indication marks

Running indication when fan works.

Stop indication when fan doesn’t work in stand-by mode.

Once power is off , heating element will stop working at first.

Fan will prolong working for 3 mins to emit plenty of heat

inside. This mark will indicate running during the 3 mins.

MAINTENANCE

1. Unplug the unit and let it cool completely.

2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You

may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.

CAUTION: DO NOT let liquid enter the heater.

3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to

clean the heater. This may cause damage or deterioration to the surface of the heater.

4. DO NOT immerse the heater in water.

5. Wait until the unit is completely dry before use.

6. Air filter needs cleaning after used 3 months. Please take down the filter as following

steps. Flush and clean the taken –down filter with water, then dry it out and re-assemble.

SAFETY FEATURES

This unit is equipped with a tip-over safety feature. Once the heater is tipped over, an internal

switch will automatically shut the heater off. Once the heater is restore in the upright position, the

heater will reset. To continue the operation, turn on the heater using the supplied remote control

or the control panel on the heater.

OVERHEAT SAFETY FEATURE

This heater is equipped with an overheat safety feature. When the heater’s internal components

reach a certain temperature that could cause overheating and possible fires, the heater will

automatically shut off.

WARNING: Do not attempt to repair or adjust any electrical or mechanical functions on this unit.

Doing so will void the warranty.

Unit

PUSH

PULL

Air Filter Air Intake Grille

PRO-FUSION WH-80B Instruction Manual And Owner's Manual

Brand: PRO-FUSION

Model: WH-80B

Type: Instruction Manual And Owner's Manual

Download PDF

report

PRO-FUSION WH-80B Instruction Manual And Owner's Manual

PRO-FUSION WH-80B Instruction Manual And Owner's Manual

Other documents