Zebra CS6080 Quick start guide

Companion Scanner

Quick Start Guide

CS6080

2 CS6080 Scanner

Copyright

ZEBRA and the stylized Zebra head are trademarks of Zebra

Technologies Corporation, registered in many jurisdictions

worldwide. All other trademarks are the property of their

COPYRIGHTS & TRADEMARKS: For complete copyright

and trademark information, go to www.zebra.com/copyright

.

WARRANTY: For complete warranty information, go to

www.zebra.com/warranty

.

END USER LICENSE AGREEMENT: For complete EULA

information, go to www.zebra.com/eula

.

Terms of Use

• Proprietary Statement

This manual contains proprietary information of Zebra

Technologies Corporation and its subsidiaries (“Zebra

Technologies”). It is intended solely for the information and

use of parties operating and maintaining the equipment

described herein. Such proprietary information may not be

used, reproduced, or disclosed to any other parties for any

other purpose without the express, written permission of

Zebra Technologies.

• Product Improvements

Continuous improvement of products is a policy of Zebra

Technologies. All specifications and designs are subject to

change without notice.

• Liability Disclaimer

Zebra Technologies takes steps to ensure that its published

Engineering specifications and manuals are correct;

however, errors do occur. Zebra Technologies reserves the

right to correct any such errors and disclaims liability resulting

therefrom.

• Limitation of Liability

In no event shall Zebra Technologies or anyone else involved

in the creation, production, or delivery of the accompanying

product (including hardware and software) be liable for any

damages whatsoever (including, without limitation,

consequential damages including loss of business profits,

business interruption, or loss of business information) arising

out of the use of, the results of use of, or inability to use such

product, even if Zebra Technologies has been advised of the

possibility of such damages. Some jurisdictions do not allow

the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply

to you.

Quick Start Guide 3

Introduction

Introducing the CS6080 Companion Scanner,

featuring a groundbreaking design that easily

converts between corded and cordless

operation, handheld and hands-free, as your

needs change. As a cordless scanner, the

CS6080 is small enough to tuck in a pocket

and offers the latest mobile technology

including contactless charging. As a corded

scanner, the CS6080 offers compact

scanning for spaces with limited real-estate.

Whether you purchase a corded or cordless

model up front, you can change modes at any

time for superior investment protection. And

you get Zebra's industry-leading scanning

performance and our unique DataCapture

DNA and industry-preferred management

tools that make it easier than ever to

i n t e g r a t e , d e p l o y an d m a n a g e y o u r s c an n e r s .

This guide provides basic instructions for

setting up, programming, and using CS6080

scanners. The scanner is available in the

following versions:

• CS6080-SR: Standard Range

• CS6080-HC: Healthcare

NOTE: This guide applies to all scanner

configurations, including cordless,

corded, standard range and healthcare

unless specifically indicated.

4 CS6080 Scanner

Features

Cordless Front View

Corded Front View

Scanner Window

Scan Button

Programmable Button

Removable Battery

Beeper

LED Indicators

USB Converter

Cable

LED Indicators

Scanner Window

Programmable Button

Scan Button

Beeper

Quick Start Guide 5

Bottom

View

Useful Barcodes

Set Defaults

Return to Factory Defaults

Add a Tab Key

To add a Tab key after scanned data, scan

the barcode below.

Add a Tab Key

NFC

Finger Grip Recess

Release Latch

6 CS6080 Scanner

Add an Enter Key

To add an Enter key after scanned data, scan

the barcode below.

Add Enter Key (Carriage Return/Line Feed)

USB Caps Lock Override

USB-Override Caps Lock Key

(Enable)

* USB-Do Not Override Caps Lock Key

(Disable)

Quick Start Guide 7

Night Mode with Vibrate

Enable Night Mode Trigger

Disable Night Mode Trigger

Toggle Night Mode

Installing the Battery

Use the battery to charge the cordless

scanner.

8 CS6080 Scanner

Inserting the Battery

1. Insert the battery into the scanner.

2. Press the battery into the scanner until

the battery snaps into place.

Removing the Battery

To remove the battery, press the release and

pull the battery away from the scanner.

Installing the Corded

USB Converter Cable

Use the USB Converter Cable to connect the

corded scanner to a host.

NOTE: If you purchased a corded

configuration, using the corded USB

Converter Cable and want to convert to a

cordless configuration, using a battery,

remove the corded USB Converter Cable

prior to step 1.

Quick Start Guide 9

Inserting the USB Cable

1. Insert the corded USB Converter Cable

into the scanner.

2. Connect the other end of the corded USB

Converter Cable to a USB port on the

host PC.

Removing the USB Cable

To remove the corded USB Converter Cable,

press the release and pull the cable away

from the scanner.

Charging

Use a cradle or charging pad to charge the

cordless scanner and use the battery charger

or cradle to charge spare batteries.

NOTE: If you purchased a cordless

configuration, using a battery and want to

convert to a corded configuration, using

the corded USB Converter Cable,

remove the battery prior to step 1.

10 CS6080 Scanner

Charging via Cradle

1. Connect the cable to the cradle with the

USB-C connector.

2. Connect the other end of the cable to a

USB port on the host PC, or to a USB

power adapter plugged into an AC outlet

with the USB-A connector.

3. Insert the CS6080 into a scanner slot to

begin charging.

• In the Standard cradle, insert the

scanner upright with the battery side

first.

• In the Healthcare Presentation

cradle, insert the scanner upside

down with the scanner window first.

NOTE: Only applies to cordless

configurations.

Standard

Healthcare Presentation

Quick Start Guide 11

The CS6080 begins charging. The charge

status LEDs light to indicate progress. Refer

to the CS6080 Scanner Product Reference

Guide for information on accessories and

LED indications.

Cradle Cable Connection

Charging via Charging Pad

1. Follow the third party instructions for

connecting your charging pad to power.

NOTE: Only applies to cordless

configurations.

Standard

Healthcare Presentation

12 CS6080 Scanner

2. Place the scanner on the charging pad

with the buttons facing up.

The battery charging indicator LED on the

scanner lights to show the charging

status.

NOTE: The CS6080 is only compatible

with Qi type charging pads and charging

times cannot be guaranteed when using

third party accessories.

Quick Start Guide 13

Charging Spare Batteries

1. Connect the cable to the cradle with the

USB-C connector.

2. Connect the other end of the cable to a

USB port on the host PC, or to a USB

power adapter plugged into an AC outlet

with the USB-A connector.

3. Remove the spare battery slot cap.

4. Insert the battery into the spare battery

slot to begin charging.

The charge LED on the cradle lights to

show the charging status.

LED Charging Status

14 CS6080 Scanner

Connecting to a Host

USB Connection

Scan one of the barcodes below.

*

USB Keyboard HID

IBM Hand-Held USB

Quick Start Guide 15

IBM OPOS

(IBM Hand-Held USB with Full Scan

Disable)

SNAPI with Imaging

Bluetooth Connection

To set up the scanner for communication with

a host using a standard Bluetooth profile,

scan one of the following barcodes.

• Cradle Bluetooth Classic (default) -

The scanner must be paired to a cradle

and the cradle communicates to the

host via the host interface cable

connection. Classic and BLE modes are

supported.

• HID Keyboard Profile - The scanner

connects to the PC/host via Bluetooth

and performs like a Bluetooth keyboard.

HID supports Follower connections.

Classic and BLE modes are supported.

• Simple Serial Interface (SSI)- For

communication when connecting to a

Zebra mobile device or PC/tablet/phone

running a Zebra scanner SDK app.

Classic, BLE and MFi modes are

supported.

• Serial Port Profile (SPP) - The scanner

connects to the PC/host via Bluetooth

and performs like there is a serial

connection. Classic Bluetooth only.

16 CS6080 Scanner

Cradle Bluetooth Classic

Cradle Bluetooth Low Energy

HID Bluetooth Classic

HID Bluetooth Low Energy (Discoverable)

SSI BT Classic (Non-Discoverable)

Quick Start Guide 17

SSI BT Classic (Discoverable)

SSI BT LE

SSI BT with MFi (iOS Support)

SPP BT Classic (Non-Discoverable)

SPP BT Classic (Discoverable)

18 CS6080 Scanner

Scanning

To scan a bar code:

1. Aim the scanner at the bar code.

2. Press the Scan button (...).

3. Ensure the aiming dot is centered on the

barcode.

The scanner beeps and the LED turns green

to indicate a successful decode.

Quick Start Guide 19

Button Actions

To actuate the buttons, apply a finite force to

the button recess.

For subsequent button actuations, remove

force, and then re-apply force.

Action Description

Scan Button (...)

Single press Trigger

Double press Issue connection to

last known address if

disconnected/if

connected in HID

mode to an Apple

device, will send

show/hide keypad

Hold for 3 seconds Battery status

Hold until beam goes

off plus 5 seconds

longer

Night mode

Programmable Button (-)

Single press (not in

cradle) default*

Show/hide keypad

Single press option 2 Programmable trigger

Single press option 3 Toggle lamp mode

(cordless only)

Single press in cradle Toggle lamp mode

(cordless only)

20 CS6080 Scanner

LED Indicators

Action LED

Decode Indicator LED

Successful decode Green

On error

Red

Battery Indicator LED

When in cradle and

charging is complete

Solid Green

When in cradle and

charging is in progress

Blinking Amber

When in cradle and

there is a charging

error

Fast Blinking Amber

When used in

handheld mode and

the Scan button (...) is

pressed for 3 seconds

- Full Battery

Solid Green

When used in

handheld mode and

the Scan button (...) is

pressed for 3 seconds

- Mid Charge

Solid Amber

When used in

handheld mode and

the Scan button (...) is

pressed - Low Battery

Solid Red

Bluetooth Indicator LED

While actively pairing Blinking Blue

Connected Solid Blue

Bluetooth Error Steady Red for 2

seconds

Page is loading ...

Zebra CS6080 Quick start guide

Related papers

Other documents