ACME MW-05 User manual

wireless

optical

mouse

www.acme.eu

Model: MW-05

Page is loading ...

4

GB

Installation

1. Plug the micro receiver into a USB port of your computer

2. Open the battery door and install battery.

3. Mouse and receiver will start pairing process automatically.

4. After pairing process is done. You can start to use your mouse.

Speed Control

Default DPI is 1000. If you want to slow the DPI, push right and left keys together for over 3 seconds,

then the DPI will automatically change from 1000 to 500. Repeat the process, DPI will return to 1000

DPI.

Store receiver into the mouse

You can store the Micro Receiver by simply put the receiver into the hole of mouse bottom cover.

Trouble Shooting

1. Check Micro receiver connection; try to inserting Micro Receiver to another USB port on your

computer.

2. No connection between the mouse and the Micro Receiver:

• Re-inserttheMicroReceiver.

• Removethebatteryfromthemouseortakeanewone.

• Placethebatteryintothemouseagain.

• Reconnect thetwo devicesby usingthe“Connect“ button which is on the bottom of the

mouse.

Warning:

• Donotdisassembletheproductorremoveanyparts.

• Donotputtheproductintowateroranyliquid.

• Donotputtheproductclosetoheatsource,orexposeittohightemperature.

Page is loading ...

16

GB

Warranty card www.acme.eu/warranty

Product Product model

Product purchase date Seller name, address

Failures(date,description,positionofthepersonwhoacceptstheproduct,rstname,lastnameandsignature)

1. Warranty period

Warranty enters into force starting with the day when the

buyeracquirestheproductfromtheseller.Warrantyperiod

is indicated on the package of the product.

2. Warranty conditions

The warranty is valid only by providing an original document

of the product acquisition and this warranty sheet, which

includes name of the product model, product purchase

date, name and address of the seller.

If it is noticed during the warranty period that the product

has faults and these faults where not caused by any of the

reasons when the warranty is not applied as indicated in the

paragraphs below, manufacturer undertakes to replace the

product.

The warranty is not applied to regular testing, maintenance

and repair or replacement of the parts which are worn out

naturally.

The warranty is not applied if damage or failures occurred

due to the following reasons:

• Inappropriate installation of the product, inappropriate

usage and/or operating the product without following

themanual,technicalrequirementsandsafetystandards

as provided by the manufacturer, and additionally, inap-

propriate warehousing, falling from heights as well as hard

strikes.

• Corrosion,mud,waterandsand.

• Repairworks,modicationsorcleaning,whichwereper-

formed by a service not authorised by the manufacturer.

• Usageofthespareparts,softwareorconsumptivemateri-

als which do not apply to the product.

• Accidents or events or any other reasons which do not

depend on the manufacturer, which includes lightning,

water,re,magneticeldandinappropriateventilation.

• Iftheproductdoesnotmeetstandardsandspecications

of a particular country, in which it was not bought. Any at-

tempt to adjust the product in order to meet technical and

safetyrequirementssuchasthoseintheothercountries

withdraws all the rights to the warranty service.

Ifnofailuresaredetectedintheproduct,alltheexpensesin

relation to the service are covered by the buyer.

Page is loading ...

Model: MW-05

www.acme.eu

wireless

optical mouse

ACME MW-05 User manual

This manual is also suitable for

ACME MW-05 User manual

in other languages

Related papers

Other documents