EDEN
| E SERIES COMBOS |
ENGLISH - 8
EC28 / EC15 / EC210 continued
1. Input- Connect your instrument here.
2. Gain- Controls the preamp volume (gain) level of your amplifier.
3. Compressor- Use this control to adjust the compression level of the amplifier.
4. Enhance- Eden tailored EQ modifier adjust this to adjust your overall EQ shaping.
5. Bass- Set at 12 O’clock this EQ provides a perfect flat Bass EQ setting turning to the left will reduce the lower frequencies while turning to
the right increases the lower frequencies.
6. Middle- Set at 12 O’clock this EQ provides a perfect flat Mid EQ setting turning to the left will reduce the Mid frequencies while turning to
the right increases the Mid frequencies.
7. Mid Sweep- Use this control in conjunction with the Middle control to adjust where in the EQ your mid level sits.
8. Treble- Set at 12 O’clock this EQ provides a perfect flat High EQ setting turning to the left will reduce the high frequencies while turning to
the right increases the High frequencies.
9. Master- Controls the overall volume of your amplifier.
10. Stereo Media Input- Connect your MP3 / CD player or other device here using a 3.5mm jack plug.
11. Tuner- Connect a standard pedal tuner or other tuning device here
12. Recording out- Connect your amplifier to an external recording device or to a mixing desk console.
13. Send- Take signal from here for an external Effects Loop.
14. Return- Return signal here from external Effects Loop.
15. Phones- Insert standard headphones here for silent practice.
16. EXT speaker out- Connect your amplifier combo with another cabinet for a bigger sound.
17. Power- Switch your unit off or on using this switch.
EC28 / EC15 / EC210 Units Specications
Power • 180 Watt Amplifier • EC28 - 2 x 8 inch Eden Designed 200W Bass Loudspeaker • EC15 - 1 x 15 inch Eden Designed 300W Bass
Loudspeaker • EC210 - 2 x 10 inch Eden Designed 200W Bass Loudspeaker • Volume Control • Preamp and Power Amp control Equalisation •
5 stage with Eden’s Enhance EQ shaping control (Enhance) and separate Bass, Mid, Mid Sweep and Treble controls • Compressor • Onboard
compressor with compression level control • Headphones • Single ¼” Headphone output jack • Stereo Media Input • Input for CD / MP3 or
other media player • Recording Out • Balanced XLR signal for use with recording equipment or connection to in house PA systems • Effects
Loop • Send and return for standard Effect Loop connectivity • Ext Speaker Out • Allows you to connect to an additional speaker cabinet •
Tuner • Dedicated tuner signal output jack