Samsung LN40N81B User manual

Owner’s

Instructions

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

· Model __________ · Serial No. ____________

TFT-LCD TELEVISION

LN40M81B

LN46M81B

LN52M81B

LN40N81B

LN46N81B

LN52N81B

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD-WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos,

por favor contacte con nuestro Servicio de Atención al Cliente.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung,

entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

Customer Care Center

Web Site

ARGENTINE 0800-333-3733 www.samsung.com/ar

BRAZIL 4004-0000 www.samsung.com/br

CHILE 800-726-7864 (SAMSUNG) www.samsung.com/cl

COLOMBIA 01 8000 112 112 www.samsung.com/co

COSTA RICA 0-800-507-7267 www.samsung.com/latin

ECUADOR 1-800-10-7267 www.samsung.com/latin

EL SALVADOR 800-6225 www.samsung.com/latin

GUATEMALA 1-800-299-0013 www.samsung.com/latin

JAMAICA 1-800-234-7267 www.samsung.com/latin

MEXICO 01-800-SAMSUNG (7267864) www.samsung.com/mx

PANAMA 800-7267 www.samsung.com/latin

PUERTO RICO 1-800-682-3180 www.samsung.com/latin

REP.DOMINICANA 1-800-751-2676 www.samsung.com/latin

TRINIDAD &TOBAGO 1-800-7267-864 www.samsung.com/latin

VENEZUELA 1-800-100-5303 www.samsung.com/latin

IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO.S.A.de C.V.

Vía Lopez Portillo No.6,

Col.San Fco.Chilpan

Tultitlán,Estado de México,C.P.54940

TEL.01-55-5747-5100 / 01-800-726-7864

EXPORTADO POR:Samsung Electronics CO.,LTD.

416,Mae tan-3dong,Yeongtong -gu,

Suwon City,Gyeonggi-do Korea

BN68-01178C-00

BN68-01178C-00-Cover.indd 1 2007-03-30 �� 10:21:35

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, right and center of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

BN68-01178C-00L03-Eng-0330.indd 1 2007-03-30 �� 10:19:42

English

Contents

GENERAL INFORMATION

List of Features ...................................................................... 2

Accessories ............................................................................ 2

Viewing the Control Panel ..................................................... 3

Viewing the Connection Panel .............................................. 4

Remote Control ...................................................................... 5

Installing Batteries in the Remote Control .............................. 6

CONNECTIONS

Connecting VHF and UHF Antennas ..................................... 6

Connecting Cable TV ............................................................. 7

Connecting a VCR ................................................................. 8

Connecting a Camcorder ...................................................... 9

Connecting a DVD Player/Set-Top Box ................................. 9

Connecting a DVD Player/Set-Top Box via HDMI ................ 10

Connecting a DVD Player/Set-Top Box via DVI ................... 10

Connecting an Amplier/DVD Home Theater .......................11

Connecting a PC ...................................................................11

OPERATION

Turning the TV On and Off ................................................... 12

Plug & Play Feature ............................................................. 12

Changing Channels ............................................................. 13

Adjusting the Volume ........................................................... 13

Viewing the Display .............................................................. 14

Viewing the Menus ............................................................... 14

Memorizing the Channels .................................................... 15

Setting Up Your Remote Control .......................................... 16

Remote Control Codes ........................................................ 18

To Select the Source ............................................................ 21

To Edit the Input Source Name ............................................ 21

PICTURE CONTROL

Using Automatic Picture Settings ......................................... 22

Adjusting the Color Tone ...................................................... 23

Activating Backlight .............................................................. 23

DNIe (Digital Natural Image engine) .................................... 24

Changing the Screen Size ................................................... 25

Freezing the Picture ............................................................. 26

Viewing Picture-in-Picture .................................................... 26

Adjusting the Detailed Settings ............................................ 29

Setting the Active Color ........................................................ 32

Setting the Movie Plus ......................................................... 33

HDMI Black Level ................................................................ 33

SOUND CONTROL

Customizing the Sound ........................................................ 34

Using Automatic Sound Settings .......................................... 34

Setting the TruSurround XT ................................................. 35

Choosing a Multi-Channel Sound (MTS) track ................... 35

Automatic Volume Control ................................................... 36

Selecting the Internal Mute .................................................. 36

Listening to the Sound of the Sub (PIP) Picture .................. 37

Resetting the Sound Settings to the Factory Defaults ......... 37

Connecting Headphones ..................................................... 37

■

CHANNEL CONTROL

Setting the Channel Manager .............................................. 38

Activating the Child Lock ...................................................... 39

Fine Tuning Analog Channels .............................................. 40

Using the Color System Feature .......................................... 40

PC DISPLAY

Using Your TV as a Computer (PC) Display ........................ 41

Display Modes ..................................................................... 41

Setting up the TV with your PC ............................................ 42

Setting the Home Theater PC .............................................. 43

TIME SETTING

Setting the Clock .................................................................. 44

FUNCTION DESCRIPTION

Selecting a Menu Language ................................................ 46

Setting the Blue Screen Mode ............................................. 46

Using the Game Mode ......................................................... 47

Setting the On/Off Melody .................................................... 47

Digital Noise Reduction ........................................................ 47

Viewing Closed Captions (On-Screen Text Messages) ....... 48

Setting the Light Effect

(LN40N81B / LN46N81B / LN52N81B) ................................ 49

Using the Energy Saving Feature ........................................ 49

Using the AV Color System Feature..................................... 49

ABOUT ANYNET

+

What is Anynet+? ................................................................ 50

Connecting Anynet+ Devices ............................................... 50

Setting Up Anynet+ .............................................................. 51

Scanning and Switching between Anynet+ Devices ............ 51

Recording ............................................................................. 52

Listening through a Receiver ............................................... 53

Check Points before Requesting Service ............................ 53

APPENDIX

Identifying Problems ............................................................ 54

Installing the Stand .............................................................. 55

Disconnecting the Stand ...................................................... 55

Wall-Mount Adjustment (Sold separately) ............................ 56

Wall Mount Kit Specications ( VESA ) ................................ 57

Using the Anti-Theft Kensington Lock .................................. 58

Specications ....................................................................... 59

■

English - 1

Symbol Press Important Note One-Touch

Button

BN68-01178C-00L03-Eng-0330.indd 1 2007-03-30 �� 10:19:43

English - 2

Accessories

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.

 Automatic timer to turn the TV on and off.

 A special sleep timer.

 Excellent Picture Quality

-

DNIe technology provides life-like clear images.

 SRS TruSurround XT

-

SRS TruSurround XT provides a virtual Dolby surround system.

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control & Batteries (AAA x 2)

Power Cord

Cleaning Cloth

Cover-Bottom

Owner’s Instructions

Warranty Card / Registration

Card / Safety Guide Manual

(Not available in all locations)

The items Color and shape may vary depending on the model.

BN68-01178C-00L03-Eng-0330.indd 2 2007-03-30 �� 10:19:44

English - 3

Viewing the Control Panel

1

1 2 3 4 6

5

2

3

4

567

5

7

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.

To use the more advanced features, you must use the remote control.

The product Color and shape may vary depending on the model.

1

SOURCE

Toggles between all the available input sources

(TV, AV1, AV2, S-Video, Component1,

Component2, PC, HDMI1, HDMI2, HDMI3).

In the on-screen menu, use this button as you would

use the ENTER button on the remote control.

2

MENU

Press to see an on-screen menu of your TV’s features.

3

+ VOL -

Press to increase or decrease the volume.

In the on-screen menu, use the + VOL - buttons as you

would use the ◄ and ► buttons on the remote control.

4 CH

Press to change channels.

In the on-screen menu, use the < CH > buttons as you

would use the ▲ and ▼ butons on the remote control.

5

SPEAKERS

6

(POWER)

Press to turn the TV on and off.

7

POWER INDICATOR

Blinks and turns off when the power is on and

lights up in stand-by mode.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

BN68-01178C-00L03-Eng-0330.indd 3 2007-03-30 �� 10:19:45

English - 4

1

AV IN 1, 2

Video and audio inputs for external devices, such as a

camcorder or VCR.

S-VIDEO

Connects an S-Video signal from a camcorder or VCR.

2

AUDIO OUT (R/L)

Connects to the audio input jacks on your Amplifier/

Home theater.

3

HDMI IN 1,2,3 /DVI IN(HDMI 2)(AUDIO R/L)

Connects to the HDMI jack of a device with an HDMI

output.

Use the HDMI IN 2 terminal for a DVI connection to an external

device.

You should use the DVI to HDMI cable or DVI-HDMI

adapter (DVI to HDMI) for a video connection, and the DVI IN

‘R-AUDIO-L’ terminal for audio.

- No sound connection is needed for an HDMI to

HDMI connection

- When using an HDMI/DVI cable connection, you must use the

HDMI IN 2 terminal

4

ANT IN

Connects to an antenna or cable TV system.

5

HEADPHONE

Connects a set of external headphones for private

listening.

6

PC IN

Connects to the video and audio output jacks on your PC.

7

SERVICE

Connector for service only.

8

COMPONENT IN 1, 2

Connect Component video/audio.

9

POWER INPUT

Connects the supplied power cord.

0

KENSINGTON LOCK

The Kensington lock (optional) is a device used to

physically fix the system when used in a public place.

If you want to use a locking device, contact the dealer

where you purchased the TV.

The place of the Kensington Lock may be different

depending on its model.

Viewing the Connection Panel

Rear Panel Jacks

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.

For more information on connecting equipment, see pages 6-11.

1 2

3 4

67

8

9

0

1

5

3

BN68-01178C-00L03-Eng-0330.indd 4 2007-03-30 �� 10:19:46

English - 5

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the

TV.

1

TV, DVD, STB, CABLE, VCR

Press to operate your TV,

DVD, STB, CABLE (box), or VCR

(see pages 16-20.)

2

POWER

Turns the TV on and off.

3

NUMERIC BUTTONS

Press to change the channel.

4

–/--

Press to select channels over 100.

For example,to select channel 121,

press " - ", then "2", then "1".

5

CH LIST

Used to display Channel Lists on the

screen.

6

TV

Selects the TV mode directly

7

VCR/DVD Functions

- Rewind

- Stop

- Play/Pause

- Fast.Forward

8

VOL / VOL

Press to increase or decrease the

volume.

9 (

MUTE)

Press to temporarily cut off the

sound.

0

MENU

Displays the main on-screen

menu.

!

RETURN

Returns to the previous menu.

@

S.MODE

Press to select the sound mode.

#

P.MODE

Press to select the picture mode

$

DNIe(Digital Natural Image

engine)

DNIe Demo/On/Off

%

MTS

Press to choose stereo, mono or

Separate Audio Program

(SAP broadcast).

^

PIP

Picture-in Picture ON/OFF.

&

SRS

Selects SRS TruSurround XT

mode.

*

When pressing this button, a

number of buttons on the remote

control (e.g. TV, DVD, STB,

CABLE, VCR, VOL and CH

buttons) light up for a few

seconds and then turn off to save

power. This function is convenient

for using the remote at night or

when dark.

(

SOURCE

Press to display all of the available

video sources.

)

PRE-CH

Tunes to the previous channel.

a

SLEEP

Press to select a preset time

interval for automatic shut off.

b

REC

Records for Live Broadcasting

c

CH

/ CH

Press to change channels.

d

EXIT

Press to exit the menu.

e

UP▲ / DOWN▼ / LEFT◄

/

RIGHT►

/ ENTER

Use to select on-screen menu

items and change menu values.

f

INFO

Press to display information on the

TV screen.

g

Anynet+

Runs the Anynet view functions

and sets up Anynet devices.

h

STILL

Press to stop the action during a

particular scene.

Press again to resume normal

video.

i

P.SIZE

Press to change the screen size.

j

PIP FUCTIONS

SOURCE : Press to select a

signal from an external source in

PIP.

POSITION :

Change the position

of the PIP screen.

CH : Displays the available

channels in sequence. (These

buttons change channels in the

PIP window only.)

k

SET

Sets the remote to control your

TV, VCR, Cable, DVD, or Set-Top

Box

RESET

When your remote does not work,

change the batteries and press

the RESET button for 2-3 seconds

before use.

This is a special remote control for the visually impaired, and has Braille

points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.

BN68-01178C-00L03-Eng-0330.indd 5 2007-03-30 �� 10:19:47

English - 6

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a

long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see "Antennas with 300

Ω Flat Twin Leads" below.

If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75 Ω

Round Leads".

If you have two antennas, see "Separate VHF and UHF Antennas".

1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter

(not supplied).

Use a screwdriver to tighten the screws.

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

ANT IN

Antennas with 300 Ω Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 Ω twin at leads, follow the directions

below.

1. Plug the antenna lead into the ANT IN terminal on the back of the TV.

Antennas with 75 Ω Round Leads

ANT IN

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before con-

necting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

UHF

VHF

ANT IN

UHF

VHF

Connections

BN68-01178C-00L03-Eng-0330.indd 6 2007-03-30 �� 10:19:48

English - 7

After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to

view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is

usually channel 3 or 4.)

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-

way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)

2. Connect this cable to a two-way splitter.

3. Connect an RF cable between the OUTPUT

terminal on the splitter and the IN terminal

on the cable box.

4. Connect an RF cable between the

ANT OUT terminal on the cable box and

the B–IN terminal on the RF(A/B) switch.

1. Find and disconnect the cable that is

connected to the ANT IN terminal on your

cable box.

This terminal might be labeled "ANT IN",

"VHF IN" or simply, "IN".

5. Connect another cable between the other

OUT terminal on the splitter and the A–IN

terminal on the RF (A/B) switch.

6. Connect the last RF cable between the

OUT terminal on the RF (A/B) switch and

the ANT IN terminal on the rear of the TV.

Splitter

Incoming

cable

Splitter

Cable Box

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

Incoming

cable

ANT IN

Splitter

Cable Box

Incoming

cable

RF (A/B)

Switch

Splitter

Cable Box

Incoming

cable

TV Rear

RF (A/B)

Switch

ANT IN

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1. Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

ANT OUT

ANT IN

BN68-01178C-00L03-Eng-0330.indd 7 2007-03-30 �� 10:19:49

English - 8

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the

instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna

from the back of the TV.

2. Connect the cable or antenna

to the ANT IN terminal on the

back of the VCR.

3. Connect an Antenna Cable

between the ANT OUT

terminal on the VCR and the

ANT IN terminal on the TV.

4.

Connect a Video Cable

between the VIDEO OUT

jack on the VCR and the

AV IN 1 [VIDEO] jack on the TV.

5. Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the

AV IN 1 [R-AUDIO-L] jacks

on the TV.

If you have a "mono"

(non-stereo) VCR, use

a Y-connector(not supplied)

to hook up to the right and

left audio input jacks

of the TV.

If your VCR is stereo, you

must connect two cables.

Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the Color of the connection terminal to the cable.

VCR Rear Panel

TV Rear Panel

2

Antenna Cable (Not supplied)

3

Video Cable (Not supplied)

4

Audio Cable (Not supplied)

5

ANT IN

S-Video Connection

Your Samsung TV can be connected to an S-Video signal from a VCR.

(This connection delivers a better picture as compared to a standard VCR.)

1. Connect an S-Video Cable

between the S-VIDEO OUT

jack on the VCR and the

AV IN 2 [S-VIDEO] jack on

the TV.

2. Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the

AV IN 2 [R-AUDIO-L] jacks

on the TV.

TV Side Panel

An S-Video cable is usually included with a VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration.

When connecting a VCR, match the Color of the connection terminal to the cable.

S-Video Cable (Not supplied)

1

VCR Rear Panel

Audio Cable (Not supplied)

2

Video Connection

BN68-01178C-00L03-Eng-0330.indd 8 2007-03-30 �� 10:19:50

English - 9

Connecting a DVD Player/Set-Top Box

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1. Connect a Component

Cable between the

COMPONENT IN(1 or 2)

[Y, P

B, PR] jacks on the TV

and the COMPONENT

[Y, PB, PR] jacks on the

DVD player/Set-Top Box

2. Connect Audio Cables

between the COMPONENT

IN(1 or 2) [R-AUDIO-L]

jacks on the TV and the

AUDIO OUT jacks on the

DVD player/Set-Top Box

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and

Pr (Red) for enhanced video quality.

Be sure to match the component video and audio connections.

For example, if connecting the video cable to COMPONENT IN, connect the audio cable

to COMPONENT IN also.

Each DVD player/STB has a different back panel configuration.

When connecting a DVD player /STB, match the Color of the connection terminal to the

cable.

DVD Player Rear Panel

TV Rear Panel

Component Cable (Not supplied)

1

Audio Cable (Not supplied)

2

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR

1. Connect a Video Cable

(or S-Video Cable )between

the AV IN 2 [VIDEO]

(or S-VIDEO) jack on the

TV and the VIDEO OUT or

S-VIDEO OUT jack on the

camcorder.

2. Connect Audio Cables

between the AV IN 2

[R-AUDIO-L] jacks on the

TV and the AUDIO OUT

jacks on the camcorder.

Camcorder

TV Side Panel

Video Cable (Not supplied)

2

Audio Cable (Not supplied)

3

Each Camcorder has a different back panel configuration.

When connecting an external device, match the Color of the connection terminal to the

cable.

S-Video Cable (Not supplied)

1

or

BN68-01178C-00L03-Eng-0330.indd 9 2007-03-30 �� 10:19:51

English - 10

Each DVD player/Set-top box has a different back panel configuration.

When connecting a DVD player/STB, match the Color of the connection terminal to the cable.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output connector on the external device.

1. Connect a DVI to HDMI

Cable or DVI-HDMI Adapter

between the HDMI IN 2

connector on the TV and

the DVI connector on the

DVD player/Set-Top Box.

2. Connect Audio Cables

between the DVI IN(HDMI 2)

[R-AUDIO-L] jack on the

TV and the AUDIO OUT jacks

on the DVD player/

Set-Top Box.

DVD Player / Set-Top Box

TV Rear Panel

Audio Cable (Not supplied)

2

DVI to HDMI Cable (Not supplied)

1

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

1. Connect an HDMI Cable

between the HDMI IN

(1,2 or 3) connector on the

TV and the HDMI connector

on the DVD player/Set-Top

Box.

DVD Player Rear Panel

TV Rear Panel

HDMI Cable (Not supplied)

What is HDMI?

• HDMI(High-Definition Multimedia Interface), is a next-generation interface that

enables the transmission of digital audio and video signals using a single cable.

• The difference between HDMI and DVI is that the HDMI device is smaller in size,

has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.

Each DVD player/Set-top box has a different back panel configuration.

The external devices that support lower versioned HDMI mode may not implement

sound output for the TV with the latest HDMI version (HDMI 1.3). In this case,

connect to HDMI IN 2 and DVI IN (HDMI 2) [R-AUDIO-L] on the back panel of the TV.

Part of lower versioned HDMI cables may cause annoying flickers or no screen

display. In this case use the cable that supports the latest HDMI version (HDMI 1.3).

or

TV Side Panel

BN68-01178C-00L03-Eng-0330.indd 10 2007-03-30 �� 10:19:52

English - 11

Connecting a PC

Using the D-Sub Cable

1. Connect a D-Sub

Cable between PC IN

[PC] connector on

the TV and the PC

output connector on

your computer.

2. Connect a PC Audio

Cable between PC IN

[AUDIO] jack on the

TV and the Audio Out

jack of the sound card

on your computer.

Using the HDMI/DVI Cable

1.

Connect a HDMI/DVI

Cable between the HDMI

IN 2 jack on the TV and

the PC output jack on

your computer.

2.

Connect a 1Stereo/2RCA

Cable between the DVI

IN(HDMI2) [L-AUDIO-

R] jack on the TV and

the Audio Out jack of

the sound card on your

computer.

Each PC has a different back panel configuration.

When connecting a PC, match the Color of the connection terminal to the cable.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.

PC

TV Rear Panel

D-Sub Cable (Not supplied)

1

PC Audio Cable (Not supplied)

2

Connecting an Amplier/DVD Home Theater

1. Connect Audio Cables

between the AUDIO OUT

[R-AUDIO-L] on the TV

and AUDIO IN [R-AUDIO-

L] on the Amplifier/DVD

Home Theater.

When an audio amplifier is

connected to the "AUDIO

OUT [L-AUDIO-R]"

terminals: Decrease the

volume of the TV,

and adjust the volume level

with the Amplifier’s volume

control.

Amplier/DVD Home Theater

TV Rear Panel

Audio Cable (Not supplied)

Each Amplifier/DVD Home Theater has a different back panel configuration.

When connecting an Amplifier/DVD Home Theater, match the Color of the connection

terminal to the cable.

Using the D-Sub Cable

Using the HDMI/DVI Cable

PC

TV Rear Panel

HDMI/DVI Cable (Not supplied)

1

1Streo/2RCA Cable (Not supplied)

2

BN68-01178C-00L03-Eng-0330.indd 11 2007-03-30 �� 10:19:54

English - 12

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently

1. Press the

POWER

button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2. Press the ENTER button to enter the language.

Press the ▲ or ▼ buttons to select language, then press the ENTER

button.

The message “Select Home Mode when installing this TV at home.”

menu is automatically displayed.

3. Press the ◄ or ► buttons to select “Shop” or “Home”, then, press the ENTER button.

We recommend setting the TV to Home mode for the best picture in your home

environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic

(Home) mode, press the Volume button and then hold down the MENU button

for five seconds on the side panel of the TV.

4. The message "Check antenna input." is displayed with "OK" selected.

Press the ENTER button.

5. Press the ▲ or ▼ buttons to select "Air", "STD", "HRC", or "IRC", then press

the ENTER button.

6. Press the ENTER button to select "Start". The TV will begin memorizing

all of the available channels.

To stop the search before it has finished, press the ENTER

button with

"Stop" selected.

7. Press the ENTER button. Press the ◄ or ► buttons to move to the

"Month", "Day", "Year", "Hour", "Minute" or "am/pm".

Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing

the ▲ or ▼ buttons. Press the ENTER button.

(Refer to "Setting the Clock"on page 45)

You can set the month, day, year, hour, and minute directly by pressing the

number buttons on the remote control.

8. The message "Enjoy your watching." is displayed.

When you have finished, press the ENTER

button.

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the button on the front of the panel.

Operation

Language

Plug & Play

English

Français

Español

Português

Move Enter Skip

Check antenna input.

Plug & Play

Enter Skip

OK

Plug & Play

Air/Cable

Air

STD

HRC

IRC

Move Enter Skip

Plug & Play

Start Plug & Play.

OK

Enter Exit

Plug & Play

Clock Set

Hour Minute am/pm

12 00 am

Adjust Move Enter

Enjoy your watching.

OK

Plug & Play

Air 50

Stop

Enter Skip

Auto Program

Plug & Play

Home

Move Enter Skip

Select Home Mode

When installing this TV at home.

Shop

Month Day Year

01 01 2007

BN68-01178C-00L03-Eng-0330.indd 12 2007-03-30 �� 10:19:56

English - 13

Changing Channels

1. Press the CH

or

CH

button to change channels.

When you press the CH

or

CH

button, the TV changes channels in

sequence.

You will see all the channels that the TV has memorized. (The TV must have

memorized at least three channels). You will not see channels that were either

erased or not memorized. See page 15 to memorize channels.

If you want to reset this feature...

1. Press the MENU

button to display the menu.

Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button.

2. Press the ENTER button again, to select "Plug & Play".

3. The message "Start Plug & Play" is displayed.

(see page 12)

Using the Channel Buttons

1. Press the PRE-CH button.

The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one

channel, then use the number button to select the second channel. Then

use the PRE-CH button to quickly alternate between them.

Using the PRE-CH Button to select the Previous Channel

Adjusting the Volume

1. Press the

VOL

or VOL

buttons to decrease or increase the volume.

Using Mute

At any time, you can cut off the sound using the MUTE button.

1. Press MUTE button and the sound cuts off.

The word " " will appear in the lower-left corner of the screen.

2. To turn mute off, press the MUTE button again, or simply press the

VOL

or VOL

buttons.

Setup

Plug & Play ►

Language : English ►

Time ►

Caption ►

Game Mode : Off ►

Blue Screen : On ►

Melody : Off ►

PC ►

▼More

TV

Move Enter Return

Plug & Play

Start Plug & Play.

OK

Enter Return

BN68-01178C-00L03-Eng-0330.indd 13 2007-03-30 �� 10:19:58

English - 14

Viewing the Display

1. Press the INFO button on the remote control.

The TV will display the channel, the type of sound,

and the status of certain picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and

the display disappears automatically.

The display identies the current channel and the status of certain audio-video settings.

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has five icons:

Picture, Sound, Channel, Setup, Input.

2. Use the ▲ or ▼ buttons to select one of the five icons.

Then press the ENTER

button to access the icon’s sub-menu.

Press the EXIT

button to exit.

The on-screen menus disappear from the screen after about one minute.

Air 7

Mono

Picture : Dynamic

Sound : Custom

MTS : Stereo

SRS TS XT : On

05 : 54 pm

Input

Source List : TV ►

Edit Name ►

Anynet+(HDMI-CEC)

TV

Move Enter Exit

BN68-01178C-00L03-Eng-0330.indd 14 2007-03-30 �� 10:19:59

English - 15

Storing Channels in Memory (Automatic Method)

1. First, select the correct signal source (Air, STD, HRC, or IRC).

2. Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER

button.

3. Press the ENTER

button to select "Start".

The TV will begin memorizing all of the available channels.

The TV automatically cycles through all of the available channels and stores

them in memory. This takes about one to two minutes. Press the

ENTER

button at any time to interrupt the memorization process and return to the

"Channel" menu.

4. After all the available channels are stored, the "Channel" menu reappears.

Press the EXIT button to exit.

To stop the search before it has finished, press the ENTER

button with "Stop"

selected.

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "cable" channels. After the available

channels are memorized, use the CH

or

CH

buttons to scan through the channels. This eliminates the need to change

channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,

memorizing the channels (automatic) and adding or deleting channels (Channel Manager).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to

the TV (i.e. an Air or a cable system).

1. Press the MENU button to display the menu.

Press the ▲ or ▼ buttons to select "Channel", then press the

ENTER

button.

2. Press the ENTER button. Repeatedly press the ▲ or ▼ buttons to cycle

through these choices: "Air", "STD", "HRC", or "IRC" (all cable TV).

Press the EXIT

button to exit.

STD, HRC and IRC identify various types of cable TV systems.

Contact your local cable company to identify the type of cable system that

exists in your particular area.

At this point, the signal source has been selected. Proceed to "Storing

Channels Automatically".

Air/Cable : Air ►

Auto Program ►

Channel Manager ►

Fine Tune ►

Color System : Auto ►

Channel

Move Enter Return

TV

Channel

Move Enter Return

TV

Air/Cable :

Auto Program

Channel Manager

Fine Tune

Color System : Auto

Air

STD

HRC

IRC

Air/Cable : Air ►

Auto Program ►

Channel Manager ►

Fine Tune ►

Color System : Auto ►

Channel

Move Enter Return

TV

Auto Program

Air 40

Stop

Enter Return

BN68-01178C-00L03-Eng-0330.indd 15 2007-03-30 �� 10:20:00

English - 16

Setting Up Your Remote Control

After the television has been set up properly, your remote control can operate in ve different modes: TV, VCR, Cable, DVD, or

Set-Top Box.

Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece

of equipment you choose.

The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up the Remote to Operate Your VCR

1. Turn off your VCR.

2. Press the VCR

button on your TV’s remote control.

3. Press the SET

button on your TV’s remote control.

4. Using the number buttons on your remote control, enter three digits of the VCR code

listed on page 18 of this manual for your brand of VCR. Make sure you enter three

digits of the code, even if the first digit is a “0”.

(If more than one code is listed, try the first one.)

5. Press the POWER button on the remote control.

Your VCR should turn on if your remote is set up correctly.

If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the

other codes listed for your brand of VCR.

If no other codes are listed, try each VCR code, 000 through 080.

Note on Using Remote Control Modes: VCR

When your remote control is in “ VCR” mode, the volume buttons still control your TV’s

volume.

Setting Up the Remote to Operate Your Cable Box

1. Turn off your cable box.

2. Press the CABLE

button on your TV’s remote control.

3. Press the SET

button on your TV’s remote control.

4. Using the number buttons on your remote control, enter three digits of the cable box

code listed on page 19 of this manual for your brand of cable box. Make sure

you enter three digits of the code, even if the first digit is a “0”. (If there is more than

one code listed, try the first one.)

5. Press the POWER button on the remote control.

Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one

of the other codes listed for your brand of cable box. If no other codes are listed, try

each code, 000 through 046.

Note on Using Remote Control Modes: Cable Box

When your remote control is in “ CABLE” mode, the volume buttons still control your TV’s

volume.

BN68-01178C-00L03-Eng-0330.indd 16 2007-03-30 �� 10:20:01

English - 17

Setting Up the Remote to Operate Your DVD

1. Turn off your DVD.

2. Press the

DVD button on your TV’s remote control.

3. Press the SET

button on your TV’s remote control.

4. Using the number buttons on your remote control, enter three digits of the DVD code

listed on page 19~20 of this manual for your brand of DVD.

Make sure you enter three digits of the code, even if the first digit is a “0”.

(If there is more than one code listed, try the first one.)

5. Press the POWER button on the remote control.

Your DVD should turn on if your remote is set up correctly.

If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the

other codes listed for your brand of DVD.

If no other codes are list-ed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVD

When your remote control is in “DVD” mode, the volume buttons still control your TV’s

volume.

Setting Up the Remote to Operate Your STB

1. Turn off your STB.

2. Press the STB

button on your TV’s remote control.

3. Press the SET

button on your TV’s remote control.

4. Using the number buttons on your remote control, enter three digits of the STB code

listed on page 20 of this manual for your brand of STB.

Make sure you enter three digits of the code, even if the first digit is a “0”.

(If there is more than one code listed, try the first one.)

5. Press the POWER button on the remote control.

Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the

other codes listed for your brand of STB.

(If no other codes are listed, try each code, 000 through 074.)

Note on Using Remote Control Modes: STB

When your remote control is in “STB” mode, the volume buttons still control your TV’s

volume.

BN68-01178C-00L03-Eng-0330.indd 17 2007-03-30 �� 10:20:01

English - 18

VCR

Remote Control Codes

Brand Code

SAMSUNG 000 001 002 003 004 005 077 078

079

ADMIRAL 020

AIWA 025

AKAI 004 027 032

AUDIO

DYNAMICS

007 026

BELL&HOWELL 018

BROKSONIC 022

CANDLE 002 003 006 008 015 055

CANON 021 056

CITIZEN 002 003 006 008 015 055

ColourTYME 007

CRAIG 002 024

CURTIS MATHES 002 007 008 017 021 025 056 064

066

DAEWOO 003 010 011 012 013 014 015 016

DB 007 026

DIMENSIA 017

DYNATECH 025

ELECTROHOME 034

EMERSON 001 003 006 021 022 025 030 032

034 040 047 050 052 060 063 065

066 067 069 073

FISHER 018 024 028 029 048 051 061

FUNAI 025

GENERAL

ELECTRIC

002 005 017 021 056

GO VIDEO 002

HARMAN

KARDON

007

HITACHI 019 025 041 042 074

INSTANT REPLAY 021

JC PENNEY 002 007 018 019 021 026 037 041

054 056

JCL 007 008 018 021 026 037

JVC 081 082 083

KENWOOD 007 008 018 021 026 037

KLH 070

KONIA 036

LG(Goldstar) 006 007 008 009 010

LIOYD 025

LOGIK 038

LXI 025

MAGNAVOX 021 056 059

MARANTZ 007 008 018 021 026 037 062

MARTA 006

MEI 021

MEMOREX 006 021 024 025

MGA 034

MIDLAND 005

MINOLTA 019 041 075

MITSUBISHI 019 034 041 046

Brand Code

MONTGOMERY

WARD

020

MTC 002 025

MULTITECH 002 005 025 038

NEC 007 008 018 026 037 062 064

OPTIMUS 020

ORION 073 074 075 076

PANASONIC 021 056 071 072

PENTAX 019 041 075

PENTEX

RESEARCH+

008

PHILCO 021 056 059

PHILIPS 021 080

PIONEER 019 026 039 053

PORTLAND 015 049 055

PROSCAN 017

QUARTZ 018

QUASAR 021 056

RADIO SHACK/

REALISTIC

006 018 020 021 024 025 029 034

048 056

RCA 002 017 019 021 035 041 043 057

068 076

SANSUI 026

SANYO 018 024

SCOTT 003 047 052 067

SEARS 006 018 019 024 028 029 041 048

051

SHARP 020 034 045 015

SHIMTOM 027 033 038 058

SIGNATURE 025

SONY 027 033 044

SYLVANIA 021 025 056 059

SYMPHONIC 025

TANDY 018 025

TASHIKA 006

TATUNG 037

TEAC 025 037 068

TECHNICS 021

TEKNIKA 006 021 025 031

TMK 066

TOSHIBA 003 019 029 051 052

TOTEVISION 002 006

UNITECH 002

VECTOR

RESEARCH

007 026

VICTOR 026

VIDEO

CONCEPTS

007 026

VIDEOSONIC 002

WARDS 002 003 006 019 020 021 024 025

034 038 041

YAMAHA 007 008 018 026 037

ZENITH 023 027 033

BN68-01178C-00L03-Eng-0330.indd 18 2007-03-30 �� 10:20:02

Page is loading ...

Samsung LN40N81B User manual

Samsung LN40N81B User manual

in other languages

Related papers

Other documents