Mode SurfTab® ventos 9.7 User manual

Page is loading ...

EN

14

b

QUICK GUIDE

Thank you for buying the TrekStor SurfTab. We are confident that this

product will be the source of much enjoyment. Please read the following

instructions carefully so that you can become acquainted with the

functions of this product and its use.

Current product information can be found at the TrekStor Website

www.trekstor.de.

Package content

• TrekStor SurfTab

• Micro-USB cable

• USB host adapter

• Power supply (100-240V)

• Cleaning cloth

• Quick guide

1) Controls and connections of the TrekStor SurfTabs

A) Power button: A longer press turns the device on or off. A short press

deactivates/activates the standby mode of the display.

B) Mains input: For connecting the power supply.

C) Mini HDMI™ connector: To connect a mini HDMI™ cable.

D) Micro USB connector: To connect a computer via the micro USB cable.

E) microSD/microSDHC card slot: To insert a microSD/microSDHC memory

card up to 32 GB.

F) Micro USB host port: To connect USB devices to the tablet.

G) Audio-out connector: To connect e. g. stereo headphones.

H) Loud speaker: For the output of stereo sound.

I) Back button: Switches back to the previous page.

J) Volume control: Press the lower/upper side of the button to lower/raise

the volume. A longer press changes the volume constantly.

K) Camera: Front side

L) Camera: Back side

M) Reset: Pressing this button (e. g. with an unfolded paperclip) performs

a reset. Note: A reset only resets the custom settings. Saved data will

remain on the device.

EN

15

2) First set up

2.1) Charging the SurfTab

Before the first use, it is recommended to fully charge the SurfTab. Connect

the DC input connector with the SurfTab and connect the power supply

to an electrical outlet.

2.2) Getting started

A) After charging the SurfTab, hold down the power button for

2-3 seconds to switch on the device.

B) After switching on the device, the start screen appears. To set the user

interface to the desired language, please tap inside the applications

menu on "SettingS" and afterwards on "Language & input".

Tap now in the right column on the first field "Language" and

select your language.

2.3) Connecting the Internet

With the SurfTab you have the possibility to access the Internet via Wi-Fi.

If you want to establish a connection to a new network, please proceed

as follows:

A) Go via the applications menu to the settings and tap on "Wi-fi" under

"WireLeSS anD netWorkS". In case the Wi-Fi function is not activated yet,

first pull the on/off switch to "on".

B) On the right side all the wireless networks are displayed. Tap on your

preferred network and enter the password into the appropriate field.

C) The SurfTab then connects with the Internet. Via the browser symbol

you can now surf the Internet as usual.

i

If you have once established a connection to a Wi-Fi network, the SurfTab

automatically connects to it as soon as it is within reach.

i

To save power, it is advisable to turn off the wireless function, if you do

not need it.

EN

16

3) Operation of the SurfTab

3.1) Switching on and off

To turn the SurfTab on, press the power button approx. 2-3 seconds.

The device turns then on. To turn the device off, press also for approx.

2-3 seconds the power button. Now the following message appears:

"WouLD you Like to Shut DoWn?". Tap on "ok" to shut down the SurfTab.

3.2) Activating/Deactivating the standby mode

If you do not want to use the SurfTablet for a while, press briefly the power

button to put the tablet in the standby mode. In this way you can save

power and be sure that the tablet does not use any unwanted services.

To exit the standby mode, press again briefly the power button.

Once you have activated the screen again, the SurfTab first displays the

screen lock. Pull the lock icon to the right edge of the circle onto the

open lock, in order to unlock the tablet.

i

The SurfTab is locked automatically when it is not used for a certain

time. A change of the interval, from when the SurfTab is supposed to go

automatically into the standby mode, can be individually adjusted under

"sEttings" + "Display" + "slEEp".

3.3) Using the touch screen

Selecting items

Touch the screen once with your fingertip to open an element or select

an option.

Move items

Keep your finger on the item that you would like to move and drag it

to the desired position on the screen.

Scrolling

In order to roll a window or the screen up, down or sideways, simply slide

your finger up or down respective from left to the right and vice versa.

Enlarging

On the screen, pull simultaneously two fingers apart or tap twice on

the display to enlarge a website or a document.

EN

17

3.4) Elements on the home screen

A B C

D E F G

A) Google™ search

B) Microphone function for voice entry

C) Applications menu and customizing the display

D) Back to the previous screen

E) Back to the home screen

F) View recently used applications (to exit the display, wipe your finger

across the screen)

G) Status display: The lower right corner is used to display different

messages (e. g. battery indicator, time, WLAN or Bluetooth® connection,

available downloads).

EN

18

3.5) Personalizing the start screen

The start screen has two more pages on the left and the right side, so that

all together five pages are available for an individual design. To display the

pages, pull the window with your finger from right to left or vice versa.

You can set up the start screen individually (as well as the four additional

pages) by adding or removing application shortcuts and widgets

or changing the desktop background.

To customize the start screen, tap first on the application menu on the right

top of the page. Then proceed as follows:

Applications

After you have tapped on the applications menu, a screen opens displaying

all currently available applications. Press longer time on an application,

which you would like to add to the start screen and then move it to the

desired position.

If you pull up the application to the edge of the screen, you can also place

the icon on the next screen.

Widgets

After you have tapped on the applications menu, a screen opens displaying

all currently available applications. Tap on the left top of the picture on

"

WiDgetS" or pull the finger from right to left across the screen to display

all available widgets.

Now press longer time on the widget, which you would like to add

to the start screen and then move it to the desired position.

3.6) Removing applications from the start screen

A) To remove an application or a widget from the start screen, press as

long on the appropriate icon, until "reMove" appears on the top of the

screen.

B) Hold down the symbol and drag it on "reMove".

C) Once the symbol lights red, you can drop it and the application or

the widget is removed from the start screen.

i

This process only deletes the shortcuts on the start screen but not

the applications itself. An instruction how to fully delete an application

from your SurfTab, can be found under point 4.2.

EN

19

3.7) Changing the desktop background

A) Touch the start screen as long at any point until a window appears with

the message "chooSe WaLLpaper froM".

B) Now choose whether you want to use a background image from the

gallery, the wallpapers or the live wallpapers (moving pictures).

C) Click on the desired image and confirm your choice with "Set WaLLpaper".

i

If you select a background from the gallery, you also have the option to

select a specific area for your desired background motif.

3.8) The display keyboard

When you tap a text field in order to enter text (e. g. a web address), the on-screen

keyboard appears. Enter the text as usual via the keys. Besides that use the

keys "?123" or "~\{" to enter numbers and special characters. For the entry

of alternative letters (e. g. those with accents or umlauts), press and hold

a particular letter and the available characters appear.

i

Go via "sEttings" + "languagE anD input" to the menu point "anDRoiD™ kEyboaRD"

in order to adjust further keyboard settings.

3.9) Using the camera

Via the lock screen

If the SurfTab is in the standby mode, briefly press the power button to

activate the device again. Then drag the lock icon onto the camera at the

left edge of the circle and the camera function is activated.

Via the applications menu

Tap on the applications menu and afterwards on the camera icon to activate

the function.

i

To press the shutter button, tap on the blue circle, which is below or right of

the picture; to zoom the picture in or out, drag the small circle from the "-"

to the "+" symbol and vice versa.

3.10) Creating an email account

To set up an email account, choose "eMaiL" via the applications menu and

then proceed as follows:

A) Tap on the upper edit box and enter a valid email address as well

as the corresponding password.

B) Tap on "next" to confirm your entry.

EN

20

C) In the next steps you can adjust other account settings. Once you have

set up the account according to your wishes, the email application

ready for use.

3.11) Removing an email account

To remove the email account, choose "eMaiL" via the applications menu and

then proceed as follows:

A) Tap the top right on the three inter-related points (settings) and then

select on the left the field with the name of your account.

B) Now scroll inside the right windows to the very bottom and tap on

"reMove account".

C) Confirm your choice with OK and the account is deleted.

4) Using the App Center

Tap on the start screen or in the applications menu on the icon, through

which you can access the App Center. In addition to the applications and

widgets that are preloaded on the SurfTab already, you can find there a

variety of additional programs, applications and books used to extend the

functions of your SurfTabs.

If you use the App Center for the first time, you must read the terms of use

and accept these. Then you can browse the App Center by category or by

keywords in order to specifically look for an application.

4.1) Downloading and using applications

A) After you have selected an application, tap on "DoWnLoaD" to install the

application.

B) Once the application has been downloaded and installed, it is located

in the applications menu. Operate the applications either from there or

add them to your start screen (see also section 3.5).

i

Certain applications need to be purchased before they can be downloaded.

For the selection of the correct payment method, please follow the

instructions of the App Center.

4.2) Uninstalling applications

If you like to uninstall an application, go via "SettingS" to "appS" and select the

application that you would like to delete. Tap now in the following window

on "uninStaLL" and confirm your choice once again with ok".

EN

21

5) Connecting other devices

5.1) Connecting a PC

A) Connect the Micro-USB connector to the Micro-USB port of the SurfTab

and the other end of the USB cable to a USB port of your computer.

B) Tap on the screen of the SurfTab on "turn on uSB Storage".

C) A moment later, the internal memory of the SurfTab is displayed as an

external drive inside the file explorer of the Computers. From there you

can download files, copy, delete or move them.

i

If you like to safely remove the SurfTab from the computer, tap on

"tuRn off usb stoRage" and disconnect it from the computer.

5.2) Connecting a USB device

USB devices, e. g. a hard drive, can be connected via the Micro-USB port.

i

It might be that the current supply of the SurfTabs is not enough to fully

guarantee the full function of the connected USB device. Therefore provide

extra current for an external hard drive e. g. via a Y cable.

5.3) Connecting a Bluetooth® device

A) Go via "SettingS" to "BLuetooth®" and set the Bluetooth® function to

"on" in order to search for devices nearby.

B) Tap now on the device that you would like to connect from the

displayed list by tapping on it.

C) Tap now on "pair" and follow any instructions by the SurfTab or the

device that is supposed to be connected.

5.4) Connecting a TV via HDMI™

A) Go via "SettingS" to "hDMi™" and activate through tapping the HDMI™

function (a check mark appears on the right side of the picture,

once the function is activated).

B) Now connect a Mini-HDMI™ cable (e. g. available on

www.trekstor-onlineshop.de) with one end to the tablet

and with the other end to the TV.

C) Select via the remote Control of your TV the HDMI™ port, to which

the SurfTab was connected. Surface and contents of the tablets

will now be displayed on the TV screen.

EN

22

Instructions for safety and use:

d

Only qualified persons may perform technical work on the product. The product may

not be opened or changed. The components cannot be serviced by the user.

e

Never expose the device to moisture, condensation and liquids.

k

Protect the device from extremely high and low temperatures and temperature

fluctuations. Use the device within an ambient temperature of 5º C to 40º C.

m

Never place the device close to a source of heat and protect it from direct sunlight.

h

Make sure that the surroundings are as dust-free as possible when you use and

store the device.

g

Never clean the surface of the device with solvents, paint thinners, cleansers or other

chemical products. Instead, use a soft, dry cloth or soft brush.

Caution: Please note that this device uses radio technology and may only be used for its

intended purpose in all countries of the European Union, Switzerland and Norway.

The manufacturer retains the right to continually improve the product. These changes may

be made without being directly described in these operating instructions. For this reason, the

information provided in these operating instructions may not reflect the current state of the art.

The manufacturer only guarantees suitability for the product's intended purpose.

In addition, the manufacturer is not responsible for damages or loss of data and

subsequent consequences.

may be trademarks or brand names of the respective owner.

HDMI™, the HDMI™ Logo and High-Definition Multimedia Interface are trademarks

or registered trademarks of HDMI™ Licensing LLC.

Android™ is a trademark of Google™ Inc. Use of this trademark is subject to Google™

Permissions.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.

and any use of such marks by TrekStor GmbH is under license. Other trademarks and trade

names are those of their respective owners.

Page is loading ...

Akku-Entsorgung

Informationspflicht gemäß Batterieverordnung (BattV)

Batterien und Akkus gehören nicht in den Hausmüll. Der Verbraucher ist dazu verpflichtet,

nicht mehr verwendete Batterien und Akkus ordnungsgemäß zurückzugeben. Lassen Sie

diese bitte nur über den Fachhandel oder durch Batteriesammelstellen entsorgen.

Hier leisten Sie einen konkreten Beitrag zum Umweltschutz.

Seit 1998 verpflichtet die Deutsche Batterieverordnung alle Bürgerinnen und Bürger,

verbrauchte Batterien und Akkus ausschließlichüber den Handel oder speziell dafür

eingerichtete Sammelstellen zu entsorgen (gesetzliche Rückgabepflicht).

Handel und Hersteller sind verpflichtet, diese Batterien und Akkus unentgeltlich

zurückzunehmen und ordnungsgemäß zu verwerten oder als Sondermüll zu

beseitigen (gesetzliche Rücknahmepflicht).

Der verbaute Li-Polymer Akku dieses Geräts ist mit dem nebenstehenden Zeichen,

bestehend aus einer durchgestrichenen Mülltonne und der Art des verwendeten

Akkus gekennzeichnet.

Akku ausbauen

a



Bevor Sie Ihr ausgedientes Gerät zur Entsorgung geben, muss der Akku aus dem Gerät

entfernt werden.

Battery disposal

Reporting requirement according to the Battery Directive (BattV)

Batteries are not part of the domestic waste. The consumer is obliged to return no longer

used batteries properly. Please dispose of them by a specialized trade or a battery collection

point. Hereby you make an important contribution to environmental protection.

Since 1998 the German Battery Directive compels all citizens to dispose of used batteries

exclusively through the trader or specially equipped departments (legal return obligation).

Trade and manufacturers are committed to take back batteries for free and to exploit it

properly or to remove it as special waste (legal take-back obligation).

The built-in lithium-polymer battery of this device is marked with the adjoining

symbol, consisting of a crossed out bin and the used battery type.

Remove battery

a



Before you return a disused device for disposal, the battery has to be removed from the device.

EC DECLARATION OF CONFORMITY

Thorsten Koroscha, LPM

As manufacturer and importer respectively:

herewith declares that the products

Product: SurfTab ventos 9.7 (ST97216)

comply with the following directive(s):

■

99/5/EC Radio Equipment and Telecommunications Terminal Equipment

■

2004/108/EC EMC Directive: Electromagnetic Compatibility

■

2006/95/EC Low Voltage Directive

The following norms were consulted to assess conformity:

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

The CE symbol conrms that this product conforms with the above mentioned norms and regulations.

Lorsch, 12.09.2012

TrekStor GmbH

Kastanienallee 8 - 10

D-64653 Lorsch, Germany

The manufacturer also declares the conformity of the product according to the following directives:

■

2001/95/EC General Product Safety

■

2002/95/EC RoHS: Hazardous substances in electrical and electronic equipment

Type: Mobile Internet Device

■

EN 300 328 V1.7.1 (2006-10)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Data transmission equipment

operating in the 2,4 GHz ISM band and using wide band modulation techniques

■

EN 301 489-1 V1.8.1 (2008-04)

EMC and ERM: EMC standard for radio equipment and services; Part 1: Common technical requirements

■

EN 301 489-17 V1.3.2 (2008-04)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)

standard for radio equipment; Part 17: Specic conditions for 2,4 GHz wideband transmission systems.

■

EN 60065:2002 + A1:2006 + Corrigendum:2006

Audio, video and similar electronic apparatus – Safety requirements

QG-STV97-V2-10-INT-120929

TrekStor GmbH

Kastanienallee 8-10

D-64653 Lorsch, Germany

www.trekstor.de

Supportinformationen

Sollten Sie Fragen zu Ihrem TrekStor Produkt haben, gehen Sie bitte wie folgt vor:

• ÜberprüfenSieanhandderProdukteigenschaftenundderFunktionenIhresGerätes

(auf der Verpackung ersichtlich), ob Sie die richtigen Einstellungen vorgenommen haben.

• LesenSieaufmerksamdiegesamteBedienungsanleitung.

• InformierenSiesichaufunsererWebsitewww.trekstor.de über aktuelle

Informationen zu Ihrem Produkt (z. B. neu verfügbare Firmware-Updates).

Wenn Sie weitergehende Fragen zu Ihrem Produkt haben, beachten Sie bitte die folgenden

TrekStor Supportoptionen:

FAQ Der FAQ-Bereich unserer Website bietet Ihnen vielfältige Problemlösungshinweise.

Hier erhalten Sie Antworten zu den am häuﬁgsten gestellten Fragen zu

unseren Produkten.

E-Mail Füllen Sie das Supportformular auf unserer Website aus oder senden Sie

eine E-Mail an support.de@trekstor.de.

Telefonsupport Von Deutschland aus wählen Sie bitte 01805-TREKSTOR

*

, 01805-87357867

*

.

Die Nummer der Supporthotline für andere Länder ﬁnden Sie auf unserer

Website unter "SERVICE".

* 14 Cent/Min. aus dem deutschen Festnetz der DTAG, max. 42 Cent/Min. aus Mobilfunknetzen.

Support information

If you have any questions regarding your TrekStor product, please proceed as follows:

• Checkthefeaturesaswellasthefunctionsofyourdevice(apparentonthepackaging),

in order to use the correct settings.

• Readthemanualcarefully.

• Informyourselfonourwebsite www.trekstor.de/en about the up-to-date information

concerning your product (e. g. available most recent ﬁrmware releases).

In the case you have further questions regarding your product, please note the following

TrekStor support options:

FAQ The FAQ area of our website oﬀers you a wide range of problem solving hints.

Here you can obtain answers to the most frequently asked questions

concerning our products.

E-Mail Please fill in the support form on our website or send an E-Mail to

support.en@trekstor.de. You can find mailing addresses for other

countries when you click "SERVICE" at the menu bar on our website.

Phone support Please ﬁnd the number of the support hotline for your country on our website

under "SERVICE" as well.

Mode SurfTab® ventos 9.7 User manual

Mode SurfTab® ventos 9.7 User manual

in other languages

Related papers

Other documents