Krups ToastControl Classic C F 151 70 Operating instructions

Category
Toasters
Type
Operating instructions
Krups ToastControl
a
f
e
g
b
c
d
F
a: Revêtement parois froides
b: Tiroir ramasse-miettes
c: Enroulement cordon
d: Commande de mise en
marche
e: Fonction de réchauffage
f: Chauffe-petits pains *
g: Bouton de réglage
D
a: Wärmeschutzmantel
b: Krümelschublade
c: Kabelaufwicklung
d: Absenktaste
e: Wiedererwärm-Funktion
f: Brötchenlift *
g: Röstgradeinsteller
NL
a: Behuizing apparaat
b: Kruimellade
c: Snoeroprolmogelijkheid
d: Broodlift
e: Warmhoudfunctie
f: Broodjes-opzetrekje *
g: Instelling bruiningsgraad
GB
a: Heat insulated casing
b: Crumb drawer
c: Flex storage spool
d: Lowering lever
e: Rewarming function
f: Support for bread rolls *
g: Toasting regulator
* Je nach Modell, Depending on model, Selon modèle, Afhanlelijk van type
6
GB
English
The toaster is a Krups quality product. The
heat-insulated casing makes for increased
safety during use.
Important Safety
Precautions
Carefully read the instructions for use
before operating the appliance.
Connect the appliance only to an
alternating current source. The voltage
stated on the rating plate must corres-
pond with that of your mains supply.
Do not leave the appliance unsupervised
during use.
Keep children away from the appliance.
Do not allow the flex to hang down.
Very high temperatures are generated
inside the appliance. Do not yourself
touch, or allow the flex to touch, any
inner part of the appliance.
Never cover the toasting well when in
use. Never put bread or rolls directly on
the toasting well.
Bread can burn, or in the vicinity of,
anything which is inflammable. Should
the bread catch fire, however, pull out the
mains plug immediately and douse the
flames with a moist cloth.
Do not use or place the appliance on or
near to a source of heat, such as a stove
hotplate or a gas flame.
Always pull out the mains plug if any-
thing untoward happens during the toas-
ting operation, before any cleaning opera-
tion and after every time the appliance
has been used.
Do not dip the appliance into water.
Do not clean the heating elements with
pointed or with sharp implements. Avoid
hefty shaking or vibrations.
Do not withdraw the mains plug by
pulling on the flex.
Do not allow the flex to hang over
corners and edges.
Do not use the appliance if either the flex
or the appliance itself is damaged.
Do not use this appliance if:
- The toaster or cord is faulty,
- It has fallen or shows visible damage or
operating problems.
In any of these cases, the appliance must
be sent to the nearest approved after
sales service centre in order to avoid any
risks of danger.
This appliance is not intended for use by
children or other persons without
assistance or supervision if their physical,
sensory or mental capabilities prevent
them from using it safely.
Children should be supervised to ensure
that they do not play with the appliance.
Young children should be supervised to
ensure they do not play with the
appliance.
Connecting the appliance
Use just the right length of flex and store
the unnecessary part on the spool in the
storage recess underneath the appliance.
Lead the flex out at the side of the
appliance and plug in at the mains (1).
Upon first using the toaster
In order to remove any possible remains
from the manufacturing operation, the
toaster should, before being used for the
first lot of toast, be heated up 1 to 2 times to
the highest toasting temperature, without
any bread in the toasting well (ventilate the
room).
Using the toaster
Insert the slices of bread (2).
Do not use slices which are too large or too
thick, as they must not be allowed to stick in
the toasting well.
Selecting the degree of toasting (3).
Choose between 6 different degrees of
browning by setting the selector to the
appropriate position:
Position 1 = lightly toasted
Position 6 = very well toasted
7
When first using, try out the toasting
setting, as the result depends upon the type
of bread and the degree of moisture.
Generally speaking, a higher temperature is
required for breads other than white.
Turn the toasting grade selector to a lower
number if, for example, only one slice of
bread is being toasted.
Caution:
Relatively dry slices of bread, or bread that
has already been toasted once, will brown
much more quickly and may under certain
circumstances catch fire. Therefore set the
heat control to a lower setting and do not
leave the toaster unattended.
Toasting
Fully depress the lowering lever, which
will then lock into position (4).
This then causes the appliance to switch on.
Taking out the toast
After completion of the toasting operation,
the toast will automatically be raised and
the appliance will switch itself off (5).
Take out the slices of toast.
To break off the toasting operation before it
is completed, simply press the lowering
lever upwards or turn the toasting regulator
on “stop” position (8).
Note: Should a slice of bread become
trapped in the toasting well, pull out the
mains plug, let the appliance cool down and
then carefully free the toast without
touching the heating elements.
Additional accessories
depending on the model
Roll support (Mod. 151)
Raise the roll support by swivelling the
two lifter grips upwards (6).
Place the rolls on the support and select
the
position
.
Switch on the appliance (7).
To improve the results, turn the rolls over
and repeat the toasting operation.
After use, lower the roll support by
swivelling the two lifter grips downwards.
The roll support should not be used for
longer than 10 minutes.
Rewarming function (Mod. 151)
With this toaster, you have the possibility of
rewarming toast which has already cooled
down.
Do this by setting the selector switch to
the position (7) and then switch on the
appliance.
The toast will be raised automatically as
soon as the rewarming operation is
completed.
Cleaning
Before commencing the cleaning operation,
pull out the mains plug.
Do not dip the appliance into water.
Never use an abrasive sponge to clean the
toaster. Clean it with a moist cloth and then
dry it with a soft cloth to keep it bright.
Regularly remove crumbs and bits of toast.
Before pulling out the crumb drawer, allow
the toaster to cool for at least ten minutes
after completion of the preceding toasting
operation.
Pull out the crumb drawer and shake out
the crumbs (9).
Clean with a moist cloth and then replace
the crumb drawer.
Never use the toaster without the crumb
drawer in position.
Disposal
The packaging comprises exclusively
environmentally-friendly materials
which should be disposed of
according to the local recycling
arrangements.
Disposal methods for the appliance
itself can be found by enquiry at the
appropriate department of the local
authority.
Environnement protection first !
iYour appliance contains valuable
materials which can be recovered or
recycled.
Leave it at a collection point.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Krups ToastControl Classic C F 151 70 Operating instructions

Category
Toasters
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI