Roland F-20 Owner's manual

Category
Synthesizer
Type
Owner's manual
Digital Piano
Deutsch Français Italiano Español Português NederlandsEnglish
Deutsch Français Italiano Español Português NederlandsEnglish
Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY and
Owners Manual p. 10). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured
that you have gained a good grasp of every feature of your new unit, read leaet “USING THE UNIT SAFELY and Owners Manual in its entirety. This
manual should be saved and kept on hand as a convenient reference.
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Digital Piano
Easy Operation Guide (Front Panel) 2
Turning the Power On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Selecting a Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Layering Two Sounds (Dual) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Playing Dierent Sounds with Left and Right Hands (Split) . . . . . . . 2
Changing the Keyboard Response (Key Touch) . . . . . . . . . . . . . . . . . . . 2
Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Playing Back Songs/Rhythms (Automatic Accompaniment for
Chords) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Recording Your Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Play 4
Placing the F-20 on a Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Attaching the Music Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Turning the Power On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Making the Power Automatically Turn O After a Time (Auto O) . 5
Listening to the Demo Songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Advanced Features 6
Adjusting the Brilliance (Brilliance) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the Reverberation (Ambience). . . . . . . . . . . . . . . . . . . . . . . . .6
Dividing the Keyboard in Two (Twin Piano) . . . . . . . . . . . . . . . . . . . . . . 6
Disabling the Buttons (Panel Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Saving the Settings (Memory Backup) . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Restoring the Factory Settings (Factory Reset) . . . . . . . . . . . . . . . . . . . 6
Formatting a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Various Function Settings (Function Mode) . . . . . . . . . . . . . . . . . . . . . . 7
Matching the Pitch with Other Instruments (Master Tuning) 7
Changing the Key of the Keyboard (Transpose) . . . . . . . . . . . .7
About the Wireless LAN Function 8
What Is Wireless LAN Function? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Connection Method (Connect by WPS) . . . . . . . . . . . . . . . . . . . . .8
Connecting in Ad-Hoc mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting 9
Contents
Environmentally Friendly Energy-Ecient Design
When 30 minutes have elapsed since you last played or operated the F-20, the power will
turn o automatically.
* If you don’t want the power to turn o automatically, change the Auto O
setting (p. 5).
Main Specications
Keyboard 88 keys (Ivory Feel-G keyboard with escapement)
Power Supply AC adaptor
Power Consumption
9 W (2 W–18 W)
9 W: Average power consumption while piano is
played with volume at center position
2 W: Power consumption immediately after
power-up; nothing being played
18 W: Rated power consumption
Dimensions
1,282 (W) x 296 (D) x 132 (H) mm
50-1/2 (W) x 11-11/16 (D) x 5-1/4 (H) inches
Weight
20 kg
44 lbs 2 oz
Accessories
Owners manual, Leaet “USING THE UNIT SAFELY,
Music rest, AC adaptor, Power cord (for connecting
AC adaptor), Damper pedal (capable of continuous
detection)
Options
(Sold Separately)
Dedicated Stand (KSC-68), Keyboard Stand (KS-18Z,
KS-12), Damper Pedal (DP-10), USB Flash Memory (*1),
Wireless USB Adapter (WNA1100-RL) (*1)
*1: Use USB Flash Memory and Wireless USB Adapter
sold by Roland. We cannot guarantee operation if
other products are used.
* In the interest of product improvement, the specications and/or
appearance of this unit are subject to change without prior notice.
2
Easy Operation Guide (Front Panel)
Turning the Power On/O
Adjusting the Volume
Use the [VOLUME] knob to adjust the volume.
Changing the Keyboard Response (Key Touch)
If you turn the [KEY TOUCH] button on, you can
change the responsiveness of the keyboard (key
touch).
When the [KEY TOUCH] button is o, the “MEDIUM”
touch (equivalent to an acoustic piano) is selected.
Selecting a Sound
Hold down the TONE button and press one of the following keys; the sound changes.
Playing Dierent Sounds with Left and Right Hands (Split)
Turn the [SPLIT] button on, and the keyboard is divided into left and right sections,
allowing you to play a dierent sound in each section.
If you hold down the [SPLIT] button, the TONE button assigned to the left section will
light.
Switching Sounds (Split)
Switching the left sound
While pressing the [SPLIT] button, hold down one of the
TONE buttons, and press a key.
Switching the right sound Use the same operation as in “Selecting a Sound, above.
Selecting a Piano
Selecting Other Sounds
Selecting an E. Piano
Layering Two Sounds (Dual)
By pressing two TONE buttons simultaneously,
you can layer two sounds.
Mix Balance
You can adjust the mix balance of the two sounds (ve steps, 0 = default value).
Changing the Point Where the Keyboard Is Divided (Split Point)
Hold down the [SPLIT] button and press a key (Default: F 3).
Hold down
Hold down
LIGHT
You can achieve fortissimo () play with a less forceful touch than “MEDIUM, so
the keyboard feels lighter. This setting makes it easy to play, even for children.
HEAVY
You have to nger the keyboard more forcefully than “MEDIUM” in order to play
fortissimo (), so the keyboard feels heavier. Dynamic ngering adds even more
feeling to what you play.
FIX The sound plays at one set volume, regardless of the force used to play the keys.
LIGHT
FIX
HEAVY
1
2
Hold down
E. Piano 1
Celesta
Clav.
E. Piano 3
E. Piano 2
Vibraphone
Synth Bell
1
2
Hold down
Grand Piano 1
Harpsichord 2
Ragtime Piano
Grand Piano 3
Grand Piano 2
Harpsichord 1
1
2
Hold down
Strings 1
Accordion
Choir 1
Choir 2
Synth Pad
Steel-str.Gt
Decay Strings
Decay Choir Pad
A.Bass + Cymbal
Fingered Bass
Church Organ 1
Jazz Organ 1
Harp
Strings 2
Thum Voice
Jazz Organ 2
Decay Choir
Church Organ 2
Acoustic Bass
Jazz Scat
Choir 3
Nylon-str.Gt
1
2
(p. 5)
Hold down
1
2
B1 B6
Hold down
+
00
+
Mix balance for Dual
Mix balance for Split
TONE button
that’s lit
2
1
Easy Operation Guide (Front Panel)
3
Deutsch Français Italiano Español Português NederlandsEnglish
Playing Back Songs/Rhythms (Automatic Accompaniment for Chords)
To play or stop a song, press the [SONG] button. To play or stop the rhythm (automatic accompani-
ment based on the chords you play), press the [RHYTHM] button.
You can select an internal song or rhythm by holding down the [SONG] or [RHYTHM] button and
pressing one of the following keys.
REFERENCE
For details on the song names and rhythm names, refer to “Internal Song List
and “Rhythm List” at the end of this manual.
Using the Metronome
Turn the [METRONOME] button on; the metronome will sound. Use the [SLOW]/[FAST] buttons to adjust the tempo.
Specifying a Numeric Tempo
A numeric value can also be specied for the tempo (20–250) (default: 108).
Changing the Number of Beats
You can choose from 0 (weak beats only), 2 (2 beats), 3 (3 beats), 4 (4 beats), 5 (5
beats), or 6 (6 beats).
You can also change the number of beats by holding down the [METRONOME]
button and using the [SLOW]/[FAST] buttons.
Example: To enter 120, hold down the [METRONOME] button and press the keys in
this order: 1
2 0 ENTER.
Recording Your Performance
Here’s how to record a song.
* Before you begin, select the sound that you want to record.
1. Press the [SONG] button and [RHYTHM] button simultaneously.
* To cancel recording, press the [SONG] button and [RHYTHM] button
simultaneously once again.
2. Play the keyboard to start recording.
3. Press the [SONG] button to stop recording.
If You Want to Record Along with the Metronome
* Sound the metronome and set the number of beats and tempo, before
recording.
If you press the [SONG] button in step 2, recording starts after a two-measure
count.
Recording Along with Rhythm
* Select a rhythm before recording.
If you press the [RHYTHM] button in step 2, recording starts after a two-measure
count.
Playing the Song You Recorded
Hold down
1
2
E3
If You Want to Redo the Recording
Start recording again from step 1.
Saving the Recorded Song to a USB Flash Drive
* Connect your USB ash drive before you continue.
Hold down the [KEY TOUCH] button and press the [SONG] button.
Once all the LEDs on the buttons are lit, the data has been saved (up
to 99 songs).
Playing a Song from a USB Flash Drive
Hold down the [SONG] button and press the “F 3” key.
You can use the two keys adjacent to “F
3” to select a song on the USB ash drive.
Hold down
Play
Prev.
Next
1
2
F
3
* You can also copy a WAV le or MIDI le from your computer to a USB ash drive,
and play it back on the F-20. For details on the formats that can be played, refer
to the end of this manual.
Hold down
0 3 4 6
52
1
2
Selecting a Rhythm
Hold down
1
2
Selecting an Internal Song
Hold down
Press the right end key; all songs play
consecutively.
1
2
Hold down
0 2 4 6 7 9
1 3 5 8
ENTER
1
2
Mix Balance
You can adjust the mix balance between the song/rhythm and the keyboard (ve levels,
0 = default).
+
0
2
While holding
either
1
Rhythm Flow
[RHYTHM] on [RHYTHM] o
Intro
Accompaniment
Ending
4
PHONES jack
Connect headphones (sold separately).
* If youre connecting only one set of
headphones, you must connect them to
the PHONES jack.
OUTPUT jack
If you connect this jack to
amplied speakers, the sound of
this unit will be heard through
them.
PEDAL jack
Connect the included
damper pedal.
DC IN jack
Connect the included AC adaptor here.
USB COMPUTER port
If you use a commercially available USB cable to connect the F-20’s USB
COMPUTER port to your computer’s USB port, you’ll be able to do the following
things.
SMF data played back by MIDI-compatible software can be sounded by the
F-20.
MIDI data can be transferred between the F-20 and your sequencer software,
opening up a wide range of possibilities for music production and editing.
Placing the F-20 on a Stand
If you want to place the F-20 on a stand, use the Roland KSC-68 (refer to the KSC-68 Owner’s Manual), KS-18Z or KS-12.
* Be careful not to pinch your ngers when setting up the stand.
Before You Play
Rear Panel Connections
KS-18Z
KS-12
AC Outlet
Power Cord
Place the AC adaptor so the side with the indicator
(see illustration) faces upwards and the side with
textual information faces downwards.
The indicator will light when you plug the AC
adaptor into an AC outlet.
If two people are using
headphones (sold
separately), connect
the headphones to the
PHONES jack and the
OUTPUT jack.
Align the front of the F-20
with the front of the stand.
Adjust so that the
height does not
exceed 1 meter
(Adjust the stand
to a level no higher
than the second
level from the
bottom).
Adjust the width of the stand
so that the rubber feet of the
F-20 straddle the stand.
Keyboard side
Top view
Align the legs of the stand with
the screws of the rear panel.
To prevent malfunction and
equipment failure, always turn
down the volume, and turn o
all the units before making any
connections.
USB MEMORY port
Connect a USB ash drive here.
If a USB ash drive is connected, you can play
or save songs.
If a wireless USB adapter (WNA1100-RL; sold
separately) is connected, you can use wireless-
compatible iOS apps (p. 8).
The volume of the F-20’s speakers will be
reduced if you connect a USB device to the USB
MEMORY port.
* Never insert or remove a USB ash drive while
this unit is turned on. Doing so may corrupt the
unit’s data or the data on the USB ash drive.
* Carefully insert the USB ash drive all the way
in—until it is rmly in place.
Before You Play
5
Deutsch Français Italiano Español Português NederlandsEnglish
Attaching the Music Rest
Heres how to attach the included music rest.
1. Loosen the music rest attachment screws located on the
back of the piano (two locations).
2. Place the music rest between the screws and the chassis.
3. While using one hand to support the music rest, tighten
the screws (two locations) to fasten the music rest rmly
in place.
* When attaching the music rest, you must use your hand to
support it rmly so that it does not fall. Be careful not to pinch
your hand.
* Don’t apply excessive force to the installed music rest.
* When attaching the music rest, you must use the music rest
attachment screws that were attached to the piano.
To remove the music rest, support it with one hand while you
loosen the screws. Remove the music rest, and then securely
retighten the screws.
Turning the Power On/O
Once everything is properly connected (p. 4), be sure to follow the
procedure below to turn on their power. If you turn on equipment
in the wrong order, you risk causing malfunction or equipment
failure.
Turning the Power On
1. Turn the [VOLUME] knob all the way toward the left to
minimize the volume.
2. Press the [ ] (POWER) button to turn the power on.
* This unit is equipped with a protection circuit. A brief interval (a
few seconds) after turning the unit on is required before it will
operate normally.
3. Use the [VOLUME] knob to adjust the volume.
* Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal
and does not indicate a malfunction.
Turning the Power O
1. Turn the [VOLUME] knob all the way toward the left to
minimize the volume.
2. Hold down the [ ] (POWER) button for one second or
longer; the power will be turned o.
Making the Power Automatically
Turn O After a Time (Auto O)
The power to this unit will be turned o automatically after
a predetermined amount of time has passed since it was last
used for playing music, or its buttons or controls were operated
(Auto O function).
If you do not want the power to be turned o automatically,
change the Auto O setting to OFF.
(Default: 30 min.)
* To restore power, turn the power on again.
Hold down
240 min.
OFF
10 min.
30 min.
1 2
3
* This setting is remembered even after the power is turned o.
Listening to the Demo Songs
While holding either
1
2
There are three demo songs.
Press the [SONG] button to stop.
Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the Owners Manual
carefully when placing this unit on a stand (p. 4).
If it is not set up properly, you risk creating an unstable
situation which could lead to the unit falling or the stand
toppling, and may result in injury.
Place the instrument 30 cm away from the wall
The speakers of the F-20 are mounted on
its rear panel. For this reason, you might
have trouble hearing the sound from the
speakers if the rear panel is placed directly
against a wall.
Don’t let the instrument fall over!
To prevent the F-20 from falling over,
don’t apply excessive force to it, and
never sit or stand on it.
30 cm
(12 inch)
* All rights reserved.
Unauthorized use
of this material for
purposes other
than private, per-
sonal enjoyment
is a violation of
applicable laws.
6
Adjusting the Brilliance (Brilliance)
Heres how to adjust the brilliance of the sound (3 levels).
Hold down
BRIGHT
MELLOW
NORMAL
C5 C6
1
2
3
Adjusting the Reverberation (Ambience)
You can adjust a reverberation of the sound, and get the impression
that you are performing in a concert hall (5 levels).
Hold down
+
DEFAULT
C5 C6
1 2
3
Dividing the Keyboard in Two (Twin Piano)
You can divide the keyboard into left and right sections so that two
people can play the same pitch ranges. This function lets you use
the unit as though it were two pianos.
C5 C6
Hold down
OFF
PAIR
INDIVIDUAL
1 2
3
The keyboard will be divided into left and right sections, with
“middle C” located in the center of each section.
You can choose one of the following ways in which the sound will
be heard.
Value Explanation
PAIR
The sound will be heard from the right as you play toward
the right of the keyboard, and from the left as you play
toward the left.
INDIVIDUAL
Notes played in the right area will be heard from the right
speaker, and notes played in the left area will be heard
from the left speaker.
* The left and right sections will have the same tone (Piano). Twin
Piano will be cancelled when you push one of the TONE buttons.
* The damper pedal aects only the right section of the keyboard.
Disabling the Buttons (Panel Lock)
While holding down the [PIANO] button, turn the power on. Keep
holding down [PIANO] button for at least six seconds. Panel Lock
will be set, and buttons other than the [ ] (POWER) button will be
disabled. This prevents the tones or settings from being changed if
you inadvertently press a button.
Panel Lock will be cancelled when you turn o the power.
Saving the Settings (Memory Backup)
When this unit’s power is turned o, it will return to its default
settings. However, if desired, you can save the following settings
so that they will be remembered even after the power is o. This is
called the “Memory Backup function.
Settings saved by Memory Backup Page
Key Touch p. 2
Brilliance p. 6
Ambience p. 6
Master Tuning p. 7
1. Hold down the [KEY TOUCH] button and press the
[RHYTHM] button.
The [OTHER] button and the [SPLIT] button will blink.
To cancel, press the [OTHER] button.
2. To save the settings, press the [SPLIT] button.
When all the LEDs on the buttons are lit, the operation is complete.
Restoring the Factory Settings (Factory Reset)
The settings you’ve changed in the function mode (p. 7) can be
restored to their factory-set condition.
NOTE
When you execute a factory reset, all settings will be
initialized and the song you recorded in internal memory
will be erased.
1. While holding down the [KEY TOUCH] button, turn the
power on. Keep holding down [KEY TOUCH] button for at
least six seconds.
The [OTHER] button and the [SPLIT] button will blink.
To cancel, press the [OTHER] button.
2. To execute the Factory Reset, press the [SPLIT] button.
When all the LEDs on the buttons are lit, the operation is complete.
3. Turn the power o, then on again.
Formatting a USB Flash Drive
Heres how to initialize (format) the entire contents
saved on a USB ash drive.
NOTE
Formatting will erase everything that has been saved on the
USB ash drive.
• Before using a new USB ash drive with the F-20 for the rst
time, you must format the USB ash drive.
1. Connect the USB ash drive that you want to format to
the USB MEMORY port.
2. While holding down the [SONG] button, turn the power
on. Keep holding down [SONG] button for at least six
seconds.
The [OTHER] button and the [SPLIT] button will blink.
To cancel, press the [OTHER] button.
3. To execute the format, press the [SPLIT] button.
When all the LEDs on the buttons are lit, the operation is complete.
4. Turn the power o, then on again.
Advanced Features
Advanced Features
7
Deutsch Français Italiano Español Português NederlandsEnglish
Hold down
3
OFF
240 min.
30 min.
10 min.
1
0
13
+2
15
-1
12
-3
10
-5
8
+4
5
3
1
+5
6
OFF
Ad-Hoc OFF
OFF
V-LINK
ON
MELLOW
BRIGHT
+
+
440.0 Hz
2
+1
14
-2
11
-4
9
4
-6
7
2
+3
16
PAIR
Ad-Hoc ON
OFF
NORMAL
DEFAULT
MVC
Auto O (p. 5)
USB Memory Mode
Twin Piano (p. 6)
Wireless LAN (p. 8)
Local Control
Brilliance (p. 6)
Ambience (p. 6)
Visual Control Mode
Transpose
MIDI
Transmit Channel
Master Tuning
Various Function Settings (Function Mode)
To make settings in Function mode, while pressing the [KEY TOUCH] button, hold down the [PIANO] button, and press one of the keys
shown in the illustration.
Changing the USB Flash Drive Setting (USB Memory Mode)
In some cases, when USB ash drive is connected to the USB MEMORY port, it may take longer for data to
be loaded, or data may fail to be loaded successfully. In this case, you may be able to solve the problem by
changing the USB MEMORY Mode setting to “1. When the unit left the factory, this was set to “2. Normally,
there is no need to make this setting.
* After you change this setting, you must turn the power o, then back on again. The new setting takes
eect when you turn the power back on.
Matching the Pitch with Other Instruments (Master Tuning)
When playing ensemble with other instruments and in other such instances, you can match the standard
pitch to another instrument.
The standard pitch generally refers to the pitch of the note that’s played when you nger the middle A key.
For a cleaner ensemble sound while performing with one or more other instruments, ensure that each
instrument’s standard pitch is in tune with that of the other instruments. This tuning of all the instruments to
a standard pitch is called “master tuning.
You can adjust the tuning in the range of 415.3 Hz–440.0 Hz (default)–466.2 Hz (in 0.1 Hz steps).
Changing the Key of the Keyboard (Transpose)
You can use the Transpose function to transpose the keyboard
in semitone steps.
For example, if a song is in the key of E major, and you want to
play it with the ngering of C major, set Transpose to a value of
“+4.
Controlling Video Equipment (Visual Control Mode)
Visual Control is a function that lets you control images along with your performance.
If you’ve set Visual Control mode to “MVC” (MIDI Visual Control, p. 9) or “V-LINK, playing the keyboard of this
unit will control the images produced by the Visual Control device connected to this unit using a USB MIDI.
Visual Control function chart
Playing the lowest 12 keys of this unit (A0–G 1) will transmit the following MIDI messages.
Visual Control function Transmitted MIDI message This unit’s operation
Switch images
CC 0 (Bank Select): 0–4 Play black keys
Program Change: 1–7 Play white keys
MIDI Transmit Channel Settings
This setting species the MIDI channel on which this unit will transmit.
MIDI uses sixteen “MIDI channels, which are numbered 1 through 16. By connecting MIDI devices and
specifying the appropriate MIDI channel for each device, you can play or select sounds on those devices.
This unit will receive all sixteen channels (1–16).
Preventing Double Notes When Working with a
Software Synthesizer
(Local Control)
If a software synthesizer is connected to USB
MIDI, turn this item “OFF.
Since most software synthesizer have their
Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get
dropped. To prevent this, you can enable the
“Local O setting so that the keyboard and
internal sound generator will be disconnected.
If you play C E G It will sound E G B
Software
Synthesizer
Local Control
Sound Generator
USB MIDI
In
USB MIDI
Out
Computer
C1
C2
C3
C4
C5
C6
C7
C8
WPS
INDIVIDUAL
1 2
8
About the Wireless LAN Function
What Is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold
separately) into the F-20’s USB MEMORY port, you’ll be able
to use wireless-compatible applications (iOS apps such as the
“Piano Partner or Air Performer ).
F-20
Wireless USB Adapter (sold
separately:
WNA1100-RL)
Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN Wireless LAN
iPhone etc.
Items required to use the wireless LAN function
Wireless USB Adapter (sold separately: WNA1100-RL)
Wireless LAN access point (e.g., wireless LAN router) *1 *2
iPhone, iPad, or iPod touch etc.
*1 The wireless LAN access point you use must support WPS. If
youre unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode.
*2 The ability to connect with all kinds of wireless LAN access
points is not guaranteed.
Basic Connection Method (Connect by WPS)
The rst time you connect the F-20 to a new wireless network, you’ll
need to perform the following procedure (WPS) to join the wireless
network.
This procedure is required only the rst time. (Once you’ve joined
the network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings when
connecting to a wireless LAN access point. We recommend that you
use WPS when connecting to a wireless LAN access point.
1. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the F-20’s USB MEMORY port.
2. Hold down the button of the Wireless USB
Adapter for three seconds.
The LED indicator of the Wireless USB Adapter will blink.
NOTE
* If you apply excessive force to the USB adapter when
pressing the button, you may damage it. Please use caution.
MEMO
You can also perform the WPS procedure by pressing WPS” in
“Various Function Settings (Function Mode)” (p. 7) instead of
pressing the button of the wireless USB adapter.
3. Perform the WPS operation on your wireless LAN access
point (e.g., press the WPS button on your wireless LAN
access point).
For details on WPS operation of your wireless LAN access point,
refer to the owner’s manual for your wireless LAN access point.
Once successfully connected, the LED indicator of the Wireless USB
Adapter will light.
You can use the wireless connection from an iOS app such as
Air Performer. Choose “F-20” in the instrument select screen of
your iOS app.
NOTE
* The device (e.g., iPhone) running the app must be connected to
the same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network from the next time.
• All connection data will be erased if you perform a factory reset.
LED indicator of the Wireless USB Adapter
LED Explanation
Lit The adapter is connected to a network.
Unlit The adapter is not connected to a network.
Blinking The adapter is searching for a network.
Connecting in Ad-Hoc mode
Heres how to connect in Ad-Hoc mode.
What is Ad-Hoc mode?
Ad-Hoc mode lets you connect the F-20 directly to an iPhone or
other wireless device without using a wireless LAN access point. This
is a convenient way to use the F-20 with an iPhone or other wireless
device if youre in a location where the wireless LAN access point
you normally use is unavailable, such as when you’re away from
home.
Limitations
The iPod touch or other wireless device connected in Ad-Hoc
mode will be unable to communicate with the Internet or with
another wireless device. However, an iPhone or other wireless
device that has cellular capability will be able to connect to the
Internet via the cellular connection.
Please be aware that if you use a cellular connection for Internet
connectivity, you may incur costs depending on your rate plan.
1. In Various Function Settings (Function Mode)” (p. 7), press
Ad-Hoc ON.
2. On the iPhone or other wireless device that you want
to connect, select “F-20” to make the connection. (For
example, on an iPhone, choose [Settings]
[Wi-Fi]
[Choose a Network] to select F-20. A password entry
screen will appear; enter f20ak.)
Ad-Hoc SSID F-20
Password f20ak
For details on how to connect to a wireless LAN from an iPhone or
other device, refer to the owner’s manual of that device.
3. When you want to end the Ad-Hoc mode connection,
restore the iPhone settings in [Settings] [Wi-Fi]
[Choose a Network] to their previous state.
9
Deutsch Français Italiano Español Português NederlandsEnglish
Troubleshooting
Problem Cause/Action
All LEDs other than
the [ ] (POWER)
button are blinking
Excessive current ow occurred at the USB MEMORY port.
Check whether there might be a problem with the USB ash drive. Next,
turn the power o, then back on again.
The speakers
produce sound
even though
headphones are
connected
Could the headphones be connected to the OUTPUT jack instead of the
PHONES jack (p. 4)?
Even though youre
using headphones
and the sound is
muted, a thumping
sound is heard
when you play the
keyboard
This unit uses a hammer action keyboard in order to simulate an acoustic
piano’s playing touch as realistically as possible. For this reason, you’ll hear
the hammers thump when you play the keyboard, just as you would when
playing an acoustic piano. Since this unit allows you to adjust its volume,
you might notice the sound of the hammers in certain situations, but this
does not indicate a malfunction. If vibration transmitted to the oor or
walls is a concern, you may be able to minimize the vibration by moving
the piano away from the wall, or by laying down a commercially available
anti-vibration mat designed for use with pianos.
Power turns o on
its own
When 30 minutes have elapsed since you last played or operated this unit,
the power will turn o automatically (This is the factory setting).
If you don’t need the power to turn o automatically, turn the Auto O
setting “OFF” (p. 5).
Power does not
turn on
Is the AC adaptor connected correctly (p. 4)?
Pedal does not
work, or is “stuck”
Is the pedal connected correctly?
Plug the cord rmly into the PEDAL jack (p. 4).
No sound/
No sound when you
play back a song
Could the unit’s volume be turned down?
Could headphones be connected?
The speakers will not produce sound if headphones is connected to the
PHONES jack (p. 4).
Pitch of the
keyboard or song is
incorrect
Could you have made Transpose settings (p. 7)?
Is the Master Tune setting appropriate (p. 7)?
The notes of a piano are tuned using a unique method (stretched tuning),
which makes upper-range notes slightly higher in pitch, and lower-range
notes slightly lower in pitch. For this reason, you might perceive the pitch
as being incorrect, but this is the way an acoustic piano should sound.
Sounds are heard
twice (doubled)
when the keyboard
is played
Could you have selected a dual tone (p. 2)?
The sound of
the higher notes
suddenly changes
from a certain key
On an acoustic piano, the approximately one and a half octaves of notes
at the upper end of the keyboard will continue sounding regardless of the
damper pedal. These notes also have a somewhat dierent tonal character.
This unit faithfully simulate this characteristic of acoustic pianos. On
this unit, the range that is unaected by the damper pedal will change
according to the transpose setting.
High-pitched
ringing is heard
If you hear this in headphones:
Piano sounds that have a brilliant and crisp character contain substantial
high-frequency components that may sound as though a metallic ringing
has been added. This is because the characteristics of an actual piano are
being faithfully reproduced, and is not a malfunction.
This ringing is more obtrusive if the reverb eect is applied heavily, so you
may be able to minimize it by decreasing the reverb.
If you don’t hear this in headphones:
It is likely that there is some other reason (such as resonances within the
unit). Please contact your dealer or the nearest Roland service center.
Volume is reduced
The volume will be reduced if you connect a USB device to the USB
MEMORY port. This does not indicate a malfunction.
Problem Cause/Action
Sound wrong, or
are buzzy
If you set the volume to the maximum setting, the sound may be distorted
depending on how you perform. If this occurs, turn down the volume.
If you don’t hear this in headphones:
Performing at high volumes may cause the speakers or objects near
the unit to resonate. Fluorescent lights or glass doors may also resonate
sympathetically. In particular, this is more likely to occur for lower notes
and higher volumes. You can take the following measures to minimize
resonances.
Locate this unit 30 cm (12 inch) away from walls or other surfaces.
Keep the volume down.
Move away from the objects that are resonating.
If you hear this in headphones:
It is likely that there is some other reason. Please contact your dealer or a
nearby Roland service center.
Power turns o
In some cases, playing back extremely high-volume SMF or WAV data from
a USB ash drive may cause the protection circuit to operate, turning the
power o.
If this occurs, reduce the volume.
When Using the Wireless LAN Function
Problem Cause/Action
Can’t connect to a
wireless LAN access
point
Make sure that your wireless LAN access point supports WPS.
If your wireless LAN access point does not support WPS, you can connect
using the procedure described in “Connecting in Ad-Hoc mode (p. 8).
The 802.11a/b wireless standard is not supported. Please use the
802.11g/n (2.4 GHz) wireless standard.
The WEP authentication method is not supported. Please use the WPA or
WPA2 authentication method.
Make sure that DHCP is enabled for your wireless LAN access point.
The connection might not occur successfully due to the state of the
radio signal. If so, use the procedure described in “Basic Connection
Method (Connect by WPS)” (p. 8), and reconnect your wireless LAN access
point.
There is a limit to the connection data that can be remembered. Making
a new connection may cause older connection data to be deleted.
All connection data will be deleted if you execute a factory reset. If the
connection data has been deleted, please re-connect to the wireless
LAN access point.
Communication is
unstable
Communication may be unstable depending on the usage of the radio
frequency spectrum.
If communication is unstable, the response may be sluggish, or if using
audio communication, there may be dropouts in the audio.
The following actions may improve the situation.
Move the wireless LAN access point and the F-20 closer to each other.
Change the channel setting of the wireless LAN access point.
The F-20 is not
found in the instru-
ment connections
of the iOS app (such
as “Air Performer”)
Is the F-20 turned on?
Is the wireless USB adapter (WNA1100-RL) inserted to the F-20?
Is the F-20 connected to the wireless LAN?
Are the F-20 and the iPhone connected to the same network (the same
wireless LAN access point)?
Is the wireless LAN access point set to allow communication between
wireless LAN devices?
For details on settings, refer to the owner’s manual of your wireless LAN
access point.
What is MIDI Visual Control?
MIDI Visual Control is an internationally-used recommended practice that was added to the MIDI specication so that visual expression could be linked with
musical performance. Video equipment that is compatible with MIDI Visual Control can be connected to electronic musical instruments via MIDI in order to control
video equipment in tandem with a performance.
What is V-LINK?
V-LINK is Roland’s proprietary specication that allows visual expression to be linked with musical performance. Video equipment that is compatible
with V-LINK can be connected to electronic musical instruments via MIDI, making it easy to enjoy a variety of visual eects that are linked with the
performance.
What is MIDI?
MIDI, short for “Musical Instrument Digital Interface, was developed as a universal standard for the exchange of performance data among electronic musical instruments and computers.
This unit is equipped with USB COMPUTER port to let it exchange performance data with external devices. These connectors can be used to connect the unit to an external device for
even greater versatility.
USING THE UNIT SAFELY
To completely turn o power to the unit, pull out the plug
from the outlet
Even with the power switch turned o, this unit
is not completely separated from its main
source of power. When the power needs to be
completely turned o, turn o the power switch
on the unit, then pull out the plug from the
outlet. For this reason, the outlet into which you choose to
connect the power cord’s plug should be one that is within
easy reach and readily accessible.
Concerning the Auto O function
The power to this unit will be turned o
automatically after a predetermined amount of
time has passed since it was last used for
playing music, or its buttons or controls were
operated (Auto O function). If you do not want
the power to be turned o automatically,
disengage the Auto O function (p. 5).
Use only the stand that is recommended
This unit should be used only with a stand that
is recommended by Roland.
Do not place in a location that is unstable
When using the unit with a stand recommended
by Roland, the stand must be carefully placed so
it is level and sure
to remain stable. If not using a
stand, you still need to make sure that any
location you choose for placing the unit
provides a level surface that will properly
support the unit, and keep it from wobbling.
Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the Owner’s
Manual carefully when placing this unit on a
stand (p. 4).
If it is not set up properly, you risk creating an
unstable situation which could lead to the unit
falling or the stand toppling, and may result in injury.
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied with
the unit. Also, make sure the line voltage at the
installation matches the input voltage specied
on the AC adaptors body. Other AC adaptors
may use a dierent polarity, or be designed for a
dierent voltage, so their use could result in
damage, malfunction, or electric shock.
Use only the supplied power cord
Use only the attached power cord. Also, the
supplied power cord must not be used with any
other device.
CAUTION
Use only the specied stand(s)
This unit is designed to be used in combination
with specic stands (KSC-68, KS-18Z, KS-12)
manufactured by Roland. If used in combination
with other stands, you risk sustaining injuries as
the result of this product dropping down or
toppling over due to a lack of stability.
Evaluate safety issues before using stands
Even if you observe the cautions given in the
owners manual, certain types of handling may
allow this product to fall from the stand, or
cause the stand to overturn. Please be mindful
of any safety issues before using this product.
Cautions when moving this unit
If you need to move the instrument, take note of
the precautions listed below. At least two
persons are required to safely lift and move the
unit. It should be handled carefully, all the while
keeping it level. Make sure to have a rm grip, to
protect yourself from injury and the instrument
from damage.
When using the KSC-68 stand, check to make sure the
screws securing the unit to the stand have not become
loose. Fasten them again securely whenever you notice
any loosening.
Disconnect the power cord.
Disconnect all cords coming from external devices.
Remove the music stand.
Keep small items out of the reach of children
To prevent accidental ingestion of the parts
listed below, always keep them out of the reach
of small children.
Removable Parts
Music rest attachment screws (p. 5)
Take care not to get burned
The area shown in the illustration may become
hot, so take care to avoid burns.
Rear panel
WARNING
IMPORTANT NOTES
Placement
Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a
piano light), or powerful spotlights to shine upon the same
area of the unit for extended periods of time. Excessive heat
can deform or discolor the unit.
Do not allow objects to remain on top of the keyboard. This
can be the cause of malfunction, such as keys ceasing to
produce sound.
Depending on the material and temperature of the surface
on which you place the unit, its rubber feet may discolor or
mar the surface.
You can place a piece of felt or cloth under the rubber feet
to prevent this from happening. If you do so, please make
sure that the unit will not slip or move accidentally.
Maintenance
To clean the unit, use a dry, soft cloth; or one that is slightly
dampened. Try to wipe the entire surface using an equal
amount of strength, moving the cloth along with the
grain of the wood. Rubbing too hard in the same area can
damage the nish.
Repairs and Data
Before sending the unit away for repairs, be sure to make
a backup of the data stored within it; or you may prefer
to write down the needed information. Although we will
do our utmost to preserve the data stored in your unit
when we carry out repairs, in some cases, such as when
the memory section is physically damaged, restoration of
the stored content may be impossible. Roland assumes no
liability concerning the restoration of any stored content
that has been lost.
Additional Precautions
Any data stored within the unit can be lost as the result of
equipment failure, incorrect operation, etc. Save the songs
you’ve recorded on a USB ash drive, so that you won’t lose
them in the event of such a failure.
Roland assumes no liability concerning the restoration of
any stored content that has been lost.
The sound of keys being struck and vibrations produced by
playing an instrument can be transmitted through a oor
or wall to an unexpected extent. Please take care not to
cause annoyance to others nearby.
Do not apply undue force to the music stand while it is
in use.
The volume will be reduced if you connect a USB device to
the USB MEMORY port.
Using External Memories
Please observe the following precautions when handling
external memory devices.
Also, make sure to carefully observe all the precautions that
were supplied with the external memory device.
Do not remove the device while reading/writing is in
progress.
To prevent damage from static electricity, discharge
all static electricity from your person before handling
the device.
Care of the keyboard
Do not write on the keyboard with any pen or other
implement, and do not stamp or place any marking on the
instrument. Ink will seep into the surface lines and become
unremovable.
Do not ax stickers on the keyboard. You may be unable to
remove stickers that use strong adhesives, and the adhesive
may cause discoloration.
To remove stubborn dirt, use a commercially available
keyboard cleaner that does not contain abrasives. Start
by wiping lightly. If the dirt does not come o, wipe using
gradually increasing amounts of pressure while taking care
not to scratch the keys.
Copyrights/Licences/Trademarks
It is forbidden by law to make an audio recording, video
recording, copy or revision of a third party’s copyrighted
work (musical work, video work, broadcast, live
performance, or other work), whether in whole or in part,
and distribute, sell, lease, perform, or broadcast it without
the permission of the copyright owner.
Do not use this product for purposes that could infringe
on a copyright held by a third party. We assume no
responsibility whatsoever with regard to any infringements
of third-party copyrights arising through your use of this
product.
The copyright of content in this product (the sound
waveform data, style data, accompaniment patterns,
phrase data, audio loops and image data) is reserved by
Roland Corporation.
Purchasers of this product are permitted to utilize said
content (except song data such as Demo Songs) for the
creating, performing, recording and distributing original
musical works.
Purchasers of this product are NOT permitted to extract
said content in original or modied form, for the purpose
of distributing recorded medium of said content or making
them available on a computer network.
Roland, GS, SuperNATURAL are either registered trademarks
or trademarks of Roland Corporation in the United States
and/or other countries.
WARNING CAUTION
10
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL
LIVE
For the U.K.
This product complies with the requirements of EMC Directive 2004/108/EC.
For EU Countries
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment requires shielded interface cables in order to meet FCC class B limit.
Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
WARNING
This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.
For C.A. US
(
Proposition 65
)
For Canada
CAN ICES-3 (B)/NMB-3 (B)
For Korea
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
V-STUDIO 20 (Model Number: VS-20)
USB Audio Controller
Cakewalk Inc.
268 Summer Street, Boston, MA 02210
02210(617) 423-9004
FP-80
Digital Piano
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
F-20
Digital Piano
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
For EU Countries
For China
Internal Song List
No. Song name Composer
1 Floral Pursuits * Léo Delibes, Arranged by John Maul
2
The Nutcracker “Waltz of the
Flowers (Jazz Arrangement)
*
Peter Ilyich Tchaikovsky, Arranged by
Masashi Hirashita
3 The Marriage of Figaro “Overture Wolfgang Amadeus Mozart
4 Midsummer * Masashi Hirashita
5 Swan-derful Samba *
Peter Ilyich Tchaikovsky, Arranged by
John Maul
6 My Pleasure * Masashi Hirashita
7 Barcarolle Fryderyk Franciszek Chopin
8 Zhavoronok
Mikhail Ivanovich Glinka, Arranged
by Mily Alexeyevich Balakirev
9 Valse, op.34-1 Fryderyk Franciszek Chopin
10 Polonaise op.53 Fryderyk Franciszek Chopin
11 Nocturne No.20 Fryderyk Franciszek Chopin
12 Die Forelle
Franz Peter Schubert, Arranged by
Franz Liszt
13 Reets dans l’Eau Claude Achille Debussy
14 La Fille aux Cheveux de Lin Claude Achille Debussy
15 La Campanella Franz Liszt
16 Scherzo No.2 Fryderyk Franciszek Chopin
17 Liebesträume 3 Franz Liszt
No. Song name Composer
18 Étude, op.10-3 Fryderyk Franciszek Chopin
19 Je te veux Erik Satie
20 Fantaisie-Impromptu Fryderyk Franciszek Chopin
21 Clair de Lune Claude Achille Debussy
22 Nocturne No.2 Fryderyk Franciszek Chopin
23 Für Elise Ludwig van Beethoven
24 Late Night Chopin *
Fryderyk Franciszek Chopin,
Arranged by John Maul
25 Fly Free * John Maul
26 Léveil de l’amour * Masashi Hirashita
27 Wedding Song * John Maul
28 Yesterday’s Dream * John Maul
29 Windy Afternoon * Masashi Hirashita
30 Scrambled Egg * Masashi Hirashita
* All rights reserved. Unauthorized use of this material for purposes other than
private, personal enjoyment is a violation of applicable laws.
* No data for the music that is played will be output from the USB COMPUTER port.
* Songs marked by an asterisk “*” are original songs composed for the Roland
Corporation. The copyrights to these songs are owned by the Roland Corporation.
Formats Playable from a USB Flash Drive
The F-20 can play back data in the following formats.
• SMF formats 0/1
• Roland Piano Digital format (i-format)
• Audio les: WAV format, 44.1 kHz, 16-bit linear
Rhythm List
No. Rhythm name
1 8-Beat
2 16-Beat
3 Triplet
4 Shue
5 Ballad 1
6 Ballad 2
7 Blues
8 Country 1
No. Rhythm name
9 Country 2
10 Gospel 1
11 Gospel 2
12 Swing 1
13 Swing 2
14 Brush Swing 1
15 Brush Swing 2
16 5-Beat Swing
No. Rhythm name
17 Waltz
18 Jazz Waltz
19 Hand Clap
20 Ragtime
21 Bossa Nova
22 Samba
23 Rumba
24 Mambo
No. Rhythm name
25 Beguine
26 Salsa
27 ChaCha
28 Tango
29 March 4/4
30 March 6/8
31 Disco
32 Rock’nroll
1
2
3 4
5
6
7
8 9
10
11
12
13
14
15 16
17
18
19
20 21
22
23
24
25
26
27 28
29
30
31
32
* 5 1 0 0 0 3 4 4 5 5 - 0 1 *
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Roland F-20 Owner's manual

Category
Synthesizer
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI