CORRECT USE OF THE PRODUCT
This appliance is intended for domestic use as
an iron with separate boiler, in accordance
with the descriptions and instructions
contained in this manual. Please read these
instructions carefully and keep them. This
manual is also available on the website
www.polti.co.uk.
POLTI S.p.A. reserves the right to make the
aesthetic, technical and construction changes
it deems necessary, without prior notice.
Before leaving our factory all our products
are rigorously tested. This is the reason why
your Polti Vaporella may contain some
residual water in the boiler.
Correct use of the product is only as detailed
in this instruction manual. Any other use may
damage the appliance and invalidate the
warranty.
INFORMATION FOR USERS
Pursuant to European Directive 2012/19/EU,
regarding electric and electronic appliances,
this appliance must not be disposed of with
domestic waste, but must be sent to an
official collection facility. This appliance
complies with EU Directive 2011/65/EU.
The crossed-out bin symbol on the
appliance indicates that, at the end
of its useful lifespan, the product
must be disposed of separately
from other waste. Therefore, at the end of
its life, the user must hand over the
appliance to an appropriate collection
centre for electric and electronic waste or,
according to the legislation in force in the
country, leave the used appliance with the
distributor when buying a new product to
replace it. Proper separate waste
collection to facilitate the subsequent
recycling, treatment and environmentally
compatible disposal of the appliance helps
to prevent negative effects on the
environment and human health, and
promotes recycling of the materials the
product is made of. Unlawful disposal by
the owner may result in the application of
the administrative sanctions envisaged by
current legislation.
WHICH WATER TO USE IN THE
BOILER
This appliance has been designed to function
with medium-hardness tap water between
8°f and 20°f. If the tap water is very hard, do
not just use demineralised water but a mix
composed of 50% tap water and 50%
demineralised water which is widely available
to purchase.
Warning: check the hardness of the water at
the technical office at your local council or
the local water supplier.
If you only use tap water, you can reduce the
formation of limescale by using the special
Kalstop (PAEU0094)
anti-limescale product,
distributed by Polti, and available for sale at
all major domestic-appliance stores or online
at www.polti.co.uk.
Do not use distilled water, undiluted
demineralised water, rain water or water
containing additives (e.g. starch, perfumes),
scented water or water produced by other
domestic appliances, by water softeners and
filter jugs.
Do not add chemical, natural, detergent, or
limescale removing substances, etc.
1. PREPARATION FOR USE
1.1 Position Polti Vaporella Next on a stable,
flat, heat-resistant surface.
1.2 Open the lid to fill the tank. Fill the water
tank with water up to the MAX level marked
on the water tank (1).
This operation must always be carried out
with the power cable disconnected from the
mains.
You can fill up the tank when necessary,
without stopping and waiting for the applian-
ce to cool.
1.3 Close the cap.
1.4 Unwind the power cable and insert the
plug in an appropriate mains socket (2), whi-
ch is earthed. The light on the switch will
start to flash. Take out and unwind the steam
hose.
1.5 To turn on the appliance press . The light
on the switch will change from flashing to
constant (3) and the iron heating light (4) will
also come on.
2. IRON TEMPERATURE
ADJUSTMENT
Before ironing an item of clothing, always
check the symbols on its label, for the
instructions provided by the manufacturer.
The sound emitted on switching on your
appliance and periodically during use, is due
to the water refilling system and is quite
normal.
ENGLISH
| 23 |