Royal Sovereign RBE-2000 User manual

Royal Sovereign International, Inc.

RBE-2000

BINDING MACHINE

Electric

Owner's Manual

Please read and retain these instructions.

To register your product, please go to www.royalsovereign.com

USA. Click the Customer Support Tab, then the Registration Tab.

www.royalsovereign.com

Página en Español 13

Page en Français 25

Page is loading ...

RBE-2000

3

SAFETY INSTRUCTIONS

The safety recommendations outlined in this section should be read and understood before operating this machine. When

using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury. Keep this information

for future reference.

Warning

1. Do not place the machine in an area where it may be exposed to water or other liquids.

2. Before cleaning the machine always unplug the machine from the wall. Do not use liquid or aerosol cleaners on the

machine.

3. To reduce the risk of electrical shock, do not take apart the machine. When service or repair work is needed bring it to a

qualified service repair technician.

4. Only use the power cord that comes with the machine. Using a different power cord may result in electric shock, fire or

cause serious damage to machine.

5. Do not use the machine in areas with high temperature or high humidity. T his may result in the machine not working

properly.

Caution

1. When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or damage

to the machine.

2. Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards.

3. Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or other

hazards.

4. When not using the machine for long periods of time, unplug the power cord from the outlet.

5. When operating, place the machine on a flat, level surface.

6. Test punch scrap sheets before punching final documents.

7. Remove staples, paper clips, and other metals from your sheets before punching.

8. Do not use the punching handle as a carrying handle.

9. Never exceed the machine’s quoted performance.

Page is loading ...

RBE-2000

5

BOX CONTENTS

Binding Machine, Power Cord, Punching Foot Pedal

PARTS

Binding handle

Punching button

Hole punch selectors

Paper entry

Paper waste tray

Punching foot pedal

Power switch

Power socket

Adjustable edge guide

Margin depth adjuster

6

FEATURES

Independent Punch and Bind System

This binding machine has a simple 2 step punch and bind system that punches up to 20 pages at a time and binds up to

300 pages.

Foot pedal

Foot pedal simplifies punching. Just insert paper into the paper entry and step on the pedal to punch.

Adjustable Paper Edge Guide

Precise paper edge guide is adjustable for sheets of paper and binding covers.

Adjustable Margin Depth

Depth of the paper margin can easily be adjusted to ¼ inch, 1/8 inch, and 1/10 inch by pulling out the adjuster.

Waste Tray

No-mess built in waste tray allows easy removal for paper clippings.

Punch Selector

Knobs can be pushed in to punch holes for paper larger than letter size, or pulled out to prevent punching holes.

RBE-2000

7

OPERATION

Set-up

1. Plug in the power cord and turn the machine on.

2. Make sure the machine is on a flat, study surface.

3. Check to make sure the paper waste tray is empty and correctly fitted.

4. Move the adjustable paper edge guide to the size of paper you wish to punch.

5. Set the size of the margin on the paper by pulling out the margin depth adjuster to 1/4”, 1/8” or 1/10”.

6. Use the hole punch selectors to determine the right amount of holes to be punched for your document. Letter sized ( 81/2” x 11”)

paper uses 19 holes. The hole punch selectors can be pulled out to prevent punching holes, or pushed in to punch holes.

7. Select the right-sized comb and covers for your documents. For the appropriate comb sizes, refer to the chart of the binding

machine.

NOTE: Test pieces of scrap paper to make sure everything is aligned properly before punching your finished document.

Punching and Binding

1. Slide the front and back covers into the paper entry lengthwise. Press the punching button or step on the foot pedal

to punch.

2. Punch the remaining sheets in small batches that do not overload the machine. This machine can punch 20 sheets of

20lb./80gsm paper at one time.

3. Place the binding comb in between the comb pins with the open side facing up. Slowly pull the binding handle forward

to have the comb pullers open up the combs wide enough to insert the punched sheets. This machine binds up to

300 sheets using a 1 ½ ” comb.

4. Insert the punched sheets onto the open binding comb. For the best results, insert the front cover face down first,

then insert the rest of the sheets and back cover.

5. When all of the sheets are loaded onto the comb, pull the handle back to its original position. Remove the bound

document by lifting it up.

8

Editing a Bound Document

Sheets may be added or removed at any time by placing the bound document into to comb pins and using the handle to

open the binding comb as described above.

Emptying the Waste Tray

The waste tray located on the front of the binding machine can be easily pulled out for emptying. Always check that the

tray is correctly fitted before punching.

RBE-2000

9

Symptom Solution

Punched holes are not centered. Adjust the edge guide and use scrap paper to test if the holes are centered.

Machine will not punch.

Check that the paper waste tray is empty and correctly fitted. Check for

blockage in the paper entry

Punched holes are not parallel to the edge.

Take a stiff object and slide it sideways through the paper entry to release any

paper clippings into the paper waste tray.

Holes are partially punched.

Ensure that the punching capacity is not exceeded. Adjust edge guide and use

scrap paper to test if holes are properly punched.

Hole edges are damaged. Reduce the number of sheets being punched.

Waste tray is leaking. Check that the paper waste tray is empty and correctly fitted.

TROUBLESHOOTING

If you are still having complications, please contact Royal Sovereign’s Service Center at 1-800-397-1025.

10

SPECIFICATIONS

Model RBE-2000

Operation type Electric

Punching capacity 20 sheets (20lb/80g paper)

Binding capacity 300 sheets

Paper dimensions US Letter (8/12" x 11" / 216 x 279mm)

Comb capacity 1/4"-1 1/2" / 6mm-25mm

Weight 33lbs / 15kg

Dimensions 16" x 14" x 8.5" / 400 x 350 x 216mm

RBE-2000

11

LIMITED ONE YEAR WARRANTY

This warranty applies to repair or replacement of product found to be defective in material or workmanship for one year

from the date of the original purchase. This warranty is extended only to the original purchaser.

This warranty does not apply to damage resulting from abuse, misuse, or improper maintenance of damage that is

attributable to acts of nature. Royal Sovereign International, Inc. (and its affiliated companies) is not liable for incidental or

consequential damages of any nature. This limitation would not apply if you live in those areas that do not permit the

exclusion or limitation of incidental or consequential damages.

Defective products for warranty repair or replacement cannot be returned without a Return Authorization number. Please

go to www.royalsovereign.com USA-Customer Support Tab to make a request for an Office Product Return Authorization

Defective products must be returned to Royal Sovereign International Consumer Return Department, freight prepaid, with

proof of purchase and Return Shipping and Handling payment (check or money order). Upon repair or replacement the

product will be returned to the customer.

Return defective product to the following address with a detailed description of the problem. If possible, pack in original

carton. Please prepay shipping charges.

For out of warranty service or frequently asked questions please go to www.royalsovereign.com USA- Customer Support Tab.

For sales of product, parts or accessories please visit us at www.royalfulfillmentcorp.com.

12

For service or sales please contact your local Royal Sovereign Office:

ROYAL SOVEREIGN INTERNATIONAL, INC.

2 Volvo Drive Rockleigh, NJ 07647 USA

TEL : +1) 905-461-1095 FAX : +1) 905-461-1096

RS CANADA INC.

1025 Westport crescent, Mississauga, Ontario, Canada L5T1E8

TEL : +1) 800-397-1025 FAX : +1) 201-750-1022

www.royalsovereign.com

Page is loading ...

24

Para obtener servicio o ventas comuníquese con la oficina de Royal Sovereign de su localidad:

ROYAL SOVEREIGN INTERNATIONAL, INC.

2 Volvo Drive Rockleigh, NJ 07647 USA

TEL : +1) 905-461-1095 FAX : +1) 905-461-1096

RS CANADA INC.

1025 Westport crescent, Mississauga, Ontario, Canada L5T1E8

TEL : +1) 800-397-1025 FAX : +1) 201-750-1022

www.royalsovereign.com

Page is loading ...

Royal Sovereign RBE-2000 User manual

Royal Sovereign RBE-2000 User manual

in other languages

Related papers

Other documents